Lighting

Custom Dynamics #4WAYHAZARDKIT - 4-Way Hazard Module Kit

4-Way Hazard Kit Adds 4-way hazards to metric bikes Works with LEDs or incandescent bulbs Includes rocker switch to activate hazards, installation kit and instructions

Custom Dynamics #CAN-ADAPTER - Adapter - CAN Bus

Canbus Adapter For use with Custom Dynamics rear LED turn signals For models with OEM turn signals removed

Custom Dynamics #CCM-5 - Magical Wizards Remotes

Magical Wizard Color Command LED Accent Light Remote Control Two key fobs for manual operation Seven different pre-programmed colors Three different strobing patterns Three different speeds of breathing functions One of thousands of custom color...

Custom Dynamics #CD-18ST-ADPT - Rear Wiring - Adapter Kit

Rear Wiring Harness Allows for aftermarket low-current draw rear LED lighting products to be installed when OEM rear lighting is removed Plug-and-Play

Custom Dynamics #CD-18ST-BUCKET - Headlight Bucket - 5-3/4" - Black

Headlight Bucket with Wire Adapter Includes adapter ring, bezel and mounting hardware Delphi to H4 wire adapter included for Plug-and-Play installation Compatible with any Custom Dynamics or ProBEAM 5.75” motorcycle LED headlamp (sold separately) ...

Custom Dynamics #CD-ALT-BS-BCM - Brake Strobe Module

Alternating Brake Strobe Module When the brake is applied, the programmed flash or strobe pattern will alternate between left and right side lighting accessories creating an eye-catching pattern Compatible with add-on custom LED lighting (such as...

Custom Dynamics #CD-ALT-BS-SS6 - Brake Strobe Module

Alternating Brake Strobe Module When the brake is applied, the programmed flash or strobe pattern will alternate between left and right side lighting accessories creating an eye-catching pattern Compatible with add-on custom LED lighting (such as...

Custom Dynamics #CD-ALT-HORN-BCM - Strobe Module - Horn Trigger

Horn Trigger Alternating Strobe Module Front turn signals and any add-on forward lighting accessory powered by the vehicle’s run power will strobe, alternating left to right while the horn is activated Select from 10 built-in flash and strobe patterns...

Custom Dynamics #CD-ATC-6 - Turn Signal Module - UTV

SXS Turn Signal Module Adds left and right self-cancelling turn signal function Select from three different auto-cancel modes by length of time the momentary turn signal switch is initially held Unit is plug and play with Custom Dynamics SXS Turn...

Custom Dynamics #CD-BAR-EXT-1 - Wire Extension - Handlebar - CAN Bus - 8"

Handlebar Extension Wire Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-2 - Wire Extension - Handlebar - Throttle-By-Wire - 15"

Throttle-By-Wire Extension Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-3 - Wire Extension - Handlebar - Throttle-By-Wire - 12"

Throttle-By-Wire Extension Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-4 - Wire Extension - Handlebar - Throttle-By-Wire - 8"

Throttle-By-Wire Extension Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-5 - Wire Extension - Handlebar - CAN Bus - 15"

Handlebar Extension Wire Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-6 - Wire Extension - Handlebar - CAN Bus - 4"

Handlebar Extension Wire Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-7 - Wire Extension - Handlebar - CAN Bus - 12"

Handlebar Extension Wire Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BAR-EXT-8 - Wire Extension - Handlebar - Throttle-By-Wire - 4"

Throttle-By-Wire Extension Kit Pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars Color-matched wires include Molex terminals on each end Plug and play

Custom Dynamics #CD-BCM-SS - Rear Turn Signal Stabilizer

Rear Turn Signal Stabilizer Adds load back to rear turn signal circuits when OEM rear turn signals or tour-pak are removed/replaced Resolves open rear turn signal codes and rapid turn indicator flashing Plug and play module installs under the seat

Custom Dynamics #CD-BR-BCM-B - LED Backrest Light - Run/Brake - Black

Dual Intensity Run & Brake Backrest LED Light Dual intensity LED Backrest Light contains 100 chip-on-board LEDs Adds an eye-catching rear running light and brake light Plug-and-Play adapter harness is included for simple installation

Custom Dynamics #CD-BR-BCM-C - LED Backrest Light - Run/Brake - Chrome

Dual Intensity Run & Brake Backrest LED Light Dual intensity LED Backrest Light contains 100 chip-on-board LEDs Adds an eye-catching rear running light and brake light Plug-and-Play adapter harness is included for simple installation

Custom Dynamics #CD-BR-TKE-B - LED Backrest Light - Run/Brake - Black

Dual Intensity Run & Brake Backrest LED Light Dual intensity LED Backrest Light contains 100 chip-on-board LEDs Adds an eye-catching rear running light and brake light Plug-and-Play adapter harness is included for simple installation

Custom Dynamics #CD-BR-TKE-C - LED Backrest Light - Run/Brake - Chrome

Dual Intensity Run & Brake Backrest LED Light Dual intensity LED Backrest Light contains 100 chip-on-board LEDs Adds an eye-catching rear running light and brake light Plug-and-Play adapter harness is included for simple installation

Custom Dynamics #CD-BR-XL-C - LED Backrest Light - Run/Brake - Chrome

Dual Intensity Run & Brake Backrest LED Light Dual intensity LED Backrest Light contains 100 chip-on-board LEDs Adds an eye-catching rear running light and brake light Plug-and-Play adapter harness is included for simple installation

Custom Dynamics #CD-CB-AW-BCM-B - Engine Guard Light - Black - FLH

Dynamic Engine Guard LEDs Each unit adds 6 bright white running LEDs and 6 amber turn signal LEDs Direct bolt on installation for 1-1/4” engine guards, requires 5" of straight (not curved) mounting area No drilling required Die-cast aluminum housing ...