Andrews

Andrews #288131G - Cam Set - 31G - Gear Drive - Twin Cam

Cam for motors with 95+ inches and 10:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000-5800 RPM power range).Can be used with stock springs and...

Andrews #216837 - Conversion Camshaft

Bolt-in cams for 88" or 95" motors.Smooth idle, broad torque band.Run best with low-restriction exhaust with 2200 - 5800 rpm range.Can be used with stock valve springs.FeaturesAllows...

Andrews #298135 - CAM SET N3 05-17 XL

CAM SET N3 05-17 XLFeaturesCams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installedStock base circle sizes allow the use of stock pushrodsN3 cams are bolt-in for 05-16...

Andrews #216855 - Conversion Camshaft

Maximum torque and horsepower with 2600 - 6200+ rpm range.Designed for engines with 9.8:1 to 10.2:1 compression ratio.Coil bind should be checked; can be used with stock tappets (minimum valve travel...

Andrews #216326 - Cam Set - 26H - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection...

Andrews #216826 - Conversion Camshaft

Bolt-in cams for low rpm torque and two-up touring.Add more torque and horsepower at low and middle range of 1800 - 5200 rpm.Can be used with stock valve springs and tappets.FeaturesAllows upgrade of...

Andrews #288131 - Cam Set - TW31S - Chain Drive - Twin Cam

Great cam for motors with 95"+ and 10.0:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000 - 5800 rpm power range).Can be used with stock...

Andrews #216337 - Cam Set - 37H - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection...