Camshafts

Andrews #217464 - Cam - M464 - M8

Cam - M464 - M8FeaturesGreat mid-range torque and power with free-flow exhaust pipes and injector tuningSpecsRiding StyleStreetExhaust Lift at TDC0.080"Exhaust Lift0.460"Intake Lobe Centerline099°Exhaust Duration230°Exhaust Lobe...

Andrews #217485 - Cam - Bolt-In - 485 - M8

Cam - Bolt-In - 485 - M8FeaturesHighest lift bolt-in chain drive cam available for use with stock valve springsBolt-in cam for 107” engines and largerExcellent low to mid rpm power (1500 - 5600+ rpm)Cam Specs are measured in the engine on the lifter @ 0...

Andrews #217504 - Cam - M504 - M8

Requires high-lift valve springs.Mid RPM cam (1800-5700).FeaturesBolt-in cam for stock compression 107" and 114" enginesSpecsExhaust Duration236°Exhaust Lift0.504"UnitsEachExhaust Open56°Intake Close30°Intake Open6°Exhaust Close0°Product...

Andrews #217520 - Camshaft - M520 - M8

Camshaft - M520 - M8FeaturesMade in the U.S.A.SpecsApplicationIntakeRiding StyleStreetUnitsEachExhaust Lift at TDC0.094"Intake Open8°Exhaust Close4°Product NameCamshaftExhaust Duration248°Intake Duration228°Intake Lift at TDC0.115"Exhaust Lift0...

Andrews #217554 - 554 Cam - Big Bore

554 Cam - Big BoreFeaturesFor 124" and 128" big-bore motors with head workMade in the U.S.A.Requires Hi-lift springs.SpecsGrind554 SeriesColor/FinishChromeRiding StyleStreetUnitsEachProduct NameCam

Andrews #288121 - Cam Set - TW21 - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700 - 5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well...

Andrews #288121G - Cam Set - 21G - Gear Drive - Twin Cam

Bolt-in cams.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cams.Cam works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06...

Andrews #288126 - Cam Set - TW26A - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured with the...

Andrews #288126G - Cam Set - TW26 - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Not for '06 dyna.FeaturesManufactured with the help of a computer with...

Andrews #288131 - Cam Set - TW31S - Chain Drive - Twin Cam

Great cam for motors with 95"+ and 10.0:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000 - 5800 rpm power range).Can be used with stock springs and tappets.Includes front cam support plate bearing...

Andrews #288131G - Cam Set - 31G - Gear Drive - Twin Cam

Cam for motors with 95+ inches and 10:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000-5800 RPM power range).Can be used with stock springs and tappets.Not for '06 Dyna.FeaturesManufactured with the...

Andrews #288137 - Cam Set - TW37B - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured...

Andrews #288137G - Cam Set - 37G - Gear Drive - Twin Cam

Bolt-in cam.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06 Dyna.FeaturesManufactured with the help of a...

Andrews #288148 - Cam Set - TW48 - Chain Drive - Twin Cam

'99 Twin Cam requires a splined cam drive sprocket.FeaturesBroad tip cams for baggers with stock motors; max torque at low and mid rpm rangesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and...

Andrews #288150 - Cam Set - TW50 - Chain Drive - Twin Cam

Designed for 95"+ motors with 9.25:1 compression ratio to 9.50:1 compression ratio and stock heads.For lighter bikes.Cams work best at higher rpm of 2500-6000.Can be used with stock valve springs and tappets.Includes front cam support plate bearing...