Mid-USA

"QUIET CLUTCH" FOR BDL BELT DRIVES

Weight: 1.0660 Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates...

"QUIET CLUTCH" FOR BDL BELT DRIVES

Weight: 1.3380 Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates...

"ULTIMATE" CLUTCH PRESSURE PLATE KIT FOR BDL BELT DRIVES

Weight: 3.12 Designed to fine tune the exact pressure needed to match your powerplants horsepower output. Allows your choice of using up to two diaphragm springs, or four to twelve coil type springs. Will not fit BDL® top fuel belt drive or BDL®...

1 1/2" WIDE SOFT-TIE PAIR FOR TRANSPORTING MOTORCYCLES

Weight: 0.52 Made from 6,000 pound test nylon strap that will safely hold 600 pounds each Measure 18" long x 1 1/2" wide for ease of use and maximum strength Double stitched at lap joint for peace of mind Available with 9" long sheepskin cover for...

1 1/2" WIDE SOFT-TIE PAIR FOR TRANSPORTING MOTORCYCLES

Weight: 0.46 Made from 6,000 pound test nylon strap that will safely hold 600 pounds each Measure 18" long x 1 1/2" wide for ease of use and maximum strength Double stitched at lap joint for peace of mind Available with 9" long sheepskin cover for...

1 1/2" WIDE SOFT-TIE PAIR FOR TRANSPORTING MOTORCYCLES

Weight: 0.37 Made from 6,000 pound test nylon strap that will safely hold 600 pounds each Measure 18" long x 1 1/2" wide for ease of use and maximum strength Double stitched at lap joint for peace of mind Available with 9" long sheepskin cover for...

1 1/2" WIDE SOFT-TIE PAIR FOR TRANSPORTING MOTORCYCLES

Weight: 0.32 Made from 6,000 pound test nylon strap that will safely hold 600 pounds each Measure 18" long x 1 1/2" wide for ease of use and maximum strength Double stitched at lap joint for peace of mind Available with 9" long sheepskin cover for...

1 1/2" WIDE SOFT-TIE PAIR FOR TRANSPORTING MOTORCYCLES

Weight: 0.57 Made from 6,000 pound test nylon strap that will safely hold 600 pounds each Measure 18" long x 1 1/2" wide for ease of use and maximum strength Double stitched at lap joint for peace of mind Available with 9" long sheepskin cover for...

1 1/4" DRAG BARS FOR CUSTOM USE - BLACK

Weight: 0.00 31" Width 1 1/4" at riser mound, 1" at grips Drilled for internal wiring Knurled at riser area to help prevent slippage 3 1/2" center mounting V-Factor - Black Finish

1 1/4" RISER SET FOR BIG TWIN

Weight: 0.80 Fit 1 1/4" I.D. fat handlebars Gives your Softail an agressive look Show quality chrome plating Use with 1/2-13 riser bolts V-FACTORChrome Plated Riser SetFits FXSTC 2006/Later & Custom UseReplaces HD# 56916-07

1 1/4" RISER SET FOR BIG TWIN

Weight: 1.516 Forged aluminum for high strength 2 1/4" height 3/4" offset Use with 1/2-13 bolts V-FACTORFor use with 1 1/4" handlebars

1 PIECE STARTER JACKSHAFT KITS FOR BIG TWIN

Weight: 0.84 One Piece hardened construction helps to prevent breakage common with high compression engines Eliminates the inner primary support bushing that sometimes creates alignment problems Includes 10-32 threaded bolt for 1989/1993 starter...

1" WIDE REAR BELT DRIVE FOR WIDE TIRE SOFTAIL, DYNA & FXR

Weight: 0.86Available your choice of either Dayco or Gates belts these top quality 1" wide drive belts designed for use with 1" wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission pulley. NOTE: Due to numerous...

1" WIDE REAR BELT DRIVE FOR WIDE TIRE SOFTAIL, DYNA & FXR

Weight: 1.04Available your choice of either Dayco or Gates belts these top quality 1" wide drive belts designed for use with 1" wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission pulley. NOTE: Due to numerous...

1" WIDE REAR BELT DRIVE FOR WIDE TIRE SOFTAIL, DYNA & FXR

Weight: 1.02Available your choice of either Dayco or Gates belts these top quality 1" wide drive belts designed for use with 1" wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission pulley. NOTE: Due to numerous...