Namz

Namz Front Turn Signal Extension - +15" (#NTSX-CB15)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping...

Namz Throttle-By-Wire Extension Harness - Harley Davidson (#NTBW-4202)

Throttle By Wire Extension Harness Kit Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars Color coded...

Namz Connector with Wire Pigtail - Delphi (#PT-13532244)

Wiring Harness with Pigtail Connectors with 18” wire pigtails Wiring matches Harley-Davidson OEM colors for easy installation Made in the U.S.A.

Namz Throttle-By-Wire Extension Harness - Harley Davidson (#NTBW-J15)

Throttle By Wire Extension Harness Kit Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars Color coded...

Namz Front Turn Signal Relocation Harness - 36" (#NTSX-3602)

Front Turn Signal Relocation Harness 36" extensions allow relocation of handlebar switch-mounted turn signals on models with CAN Bus electrical systems After cutting and disconnecting the wires at...

Namz Front Turn Signal Extension - +8" (#NTSX-CB08)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping...

Namz Y Power Tap Harness - Harley Davidson (#NOBD-PYH-CB)

Power Port Y-Adaptor Gives you two available ports to tap for 12V switched power; works great for testing, using the OBDP and keeping your optional accessory plug in at the same time Made in the U...

Namz Connector with Wire Pigtail - Delphi (#PT-15336027-B)

Wiring Harness with Pigtail Connectors with 18” wire pigtails Wiring matches Harley-Davidson OEM colors for easy installation Made in the U.S.A.

Namz Powerport with Cover - CAN Bus (#NOB-PPCB)

On Board Power Port Plugs into on-board diagnostic port 100% plug-n-play Acts like a cigarette lighter port in your automobile; works great for powering and charging accessories while riding Made...

Namz Ignition Wiring Harness - Harley Davidson (#NHD-32435-99)

Ignition Wiring Harness Match OEM H-D specs Simple, plug-and-play installation Made in the U.S.A.

Namz Delphi Mating Connectors (#PT-410017)

Wiring Harness with Pigtail Connectors with 18” wire pigtails Wiring matches Harley-Davidson OEM colors for easy installation Made in the U.S.A.

Namz Front Turn Signal Extension - +4" (#NTSX-CB04)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping...

Namz Throttle-By-Wire Extension Harness - Harley Davidson (#NTBW-J12)

Throttle By Wire Extension Harness Kit Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars Color coded...

Namz Throttle-By-Wire Extension Harness - Harley Davidson (#NTBW-J08)

Throttle By Wire Extension Harness Kit Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars Color coded...

Namz Molex MX 150 Connector - 2 Pin Male - Black (#NM-33481-0201)

Molex MX 150 Connector Component — Wiring Connector Male and female connectors and terminals Simple to use Watertight construction in a small compact size Hole plugs are used when a wire/terminal...

Namz Molex MX 150 Connector - 2 Pin Female - Black (#NM-33471-0201)

Molex MX 150 Connector Component — Wiring Connector Male and female connectors and terminals Simple to use Watertight construction in a small compact size Hole plugs are used when a wire/terminal...

Namz Delphi Throttle Position Sensor Connector (#ND-12162182-B)

OEM-Type Connector — TPS Connector Made in the U.S.A.

Namz Delphi Ignition Coil Connector (#ND-12162191-B)

OEM-Type Connector — Wiring Connector Made in the U.S.A.

Namz Quick Disconnect Wiring Harness - Harley Davidson (#NTP-H03)

Tour-Pak® Quick Disconnect Wiring Harness Add power to your Tour-Pak® with quick-disconnect convenience Plugs into rear fender harness and connects into your Tour-Pak® Connector is exposed behind...

Namz Quick Disconnect Wiring Harness - Harley Davidson (#NTP-H02)

Tour-Pak® Quick Disconnect Wiring Harness Universal plug and play Tour-Pak power tap harness Easy Removal

Namz Delphi Engine Temp Connector (#ND-12162193-B)

OEM-Type Connector — Engine Temperature Connector Made in the U.S.A.

Namz Mating Connectors (#NMD-410016)

Delphi/AMP Connector Kit and Refills — Wiring Connector Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Rear Speaker Harness (#NHD-70160-06)

Rear Speaker Harness Made in the U.S.A. Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Namz Delphi OEM “B+” Female Connector (#ND-FBP)

OEM-Type Connector — Wiring Connector Pack Made in the U.S.A.