Feuling

Feuling Parts #1075 - Valve Guide Seals - For 0.420" Guide - 5/16" Valve Stem - Twin Cam | XL

Valve Guide Seals - For 0.420" Guide - 5/16" Valve Stem - Twin Cam | XLFeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem with minimal...

Feuling Parts #1077 - Valve Guide Seals - For 0.530" Guide - 5/16" Valve Stem - Screamin' Eagle Cylinder Heads

Fits most Screamin Eagle cylinder heads.FeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem with minimal frictionMade in the USASpecsUnits4...

Feuling Parts #1078 - Valve Guide Seals - For 0.500" Guide - 5/16" Valve Stem

Valve Guide Seals - For 0.500" Guide - 5/16" Valve StemFeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem with minimal frictionMade in...

Feuling Parts #1100 - Valve Spring Kit - For 5/16" Valve Stem - Evolution Big Twin | Twin Cam | XL

Valve Spring Kit - For 5/16" Valve Stem - Evolution Big Twin | Twin Cam | XLFeaturesMachined from premium-grade hi-tensile chrome silicon single-conical ovate wireShot-peened with specially processed thermal heat treat and super NexTex® finish for...

Feuling Parts #1120 - Valve Spring Kit - Steel Retainers - 5/16" Valve Stem - EVO | Twin Cam

Valve Spring Kit - Steel Retainers - 5/16" Valve Stem - EVO | Twin CamFeaturesMade from heat treated chromoly conical ovate wireHand measured and labeled specifically based on their coil bing / required open heightUses a much smaller and lighter...

Feuling Parts #1122 - Valve Spring Kit - TI Retainers - For 5/16" Valve Stem - EVO | Twin Cam

Valve Spring Kit - TI Retainers - For 5/16" Valve Stem - EVO | Twin CamFeaturesMade from heat treated chromoly conical ovate wireHand measured and labeled specifically based on their coil bing / required open heightUses a much smaller and lighter...

Feuling Parts #1200 - Valve Spring Kit - High Load Beehive® with TI Retainers - Evo/Twin Cam | XL | Buell

For '99-'04 Twin Cam and '86-'03 XL with 10°, standard 5/16" valve stem and keeper groove.Kit Includes:• 200+ lb Springs• Titanium Retainers• Seats• Seals• Keepers• Seat ShimsFeaturesMade from premium stress-relieved conical ovate wire with nitrided...

Feuling Parts #1206 - Valve Locks - Offset 0.050" - Twin Cam

Offset 10° for 5/16" valve stems.Raises the valve spring retainer to gain 0.050" of installed height without machining the cylinder head spring seat.Will lower valve spring pressure.Will also fit Feuling High Load Beehive valve spring...

Feuling Parts #1212 - Valve Locks - Standard Replacement - Buell | Twin Cam | XL

Steel valve locks standard height groove 5/16" valve stems, 7° with square groove.Stock replacement for '84-'04 Evolution and Twin Cam and '86-'03 XL.FeaturesSecures an engine's valve retainer to the valve stem, preventing the valve from dropping in...

Feuling Parts #1390 - Camshaft - 518 Grind - Evolution

Requires Feuling pushrods.FeaturesDirect bolt-in replacement for EVO enginesCan be used with stock valve springs, pushrods and liftersWill respond well with performance exhaust and air cleanerWill also respond well with increased compression and cylinder...

Feuling Parts #1391 - Camshaft - Reaper® EVO 543 Series - Evolution Big Twin '84-'99

Requires performance valve springs.Performance lifters recommended but not required.Will work with factory pushrods on engines with factory stack up; if deck height, cylinders or rocker boxes have been modified from stock then adjustable pushrods are...

Feuling Parts #1392 - Cam - Evo 574 Series - Evolution Big Twin '84-'99

Cam - Evo 574 Series - Evolution Big Twin '84-'99FeaturesWill work with factory pushrods on engines with factory stack upResponds well to head work and increased compressionRpm range 2100-6500Overlap: 29Made in the USAPerformance lifters recommended but...

Feuling Parts #1393 - Cam - EVO 594 Series - Evolution Big Twin '84-'99

Requires performance valve springs, performance lifters, adjustable pushrods, increased compresiion, cyllinder head work, performance exhaust and intake air cleaner.Rpm power range 2500-6400.FeaturesFierce performing camshaft for an array of engine...

Feuling Parts #2023 - Sandwich Adapter Kit - Twin Cam/EVO

Sandwich Adapter Kit - Twin Cam/EVOFeatures1/8" NPT portsFeuling offset sandwich adapters allow easy hook up of any style remote oil cooler or additional oil filter set upDesigned with pressure relief valve rather than standard thermostat; pressure...

Feuling Parts #2073 - Inner Cam Bearing - XL

Inner Cam Bearing - XLFeaturesBearings are heavy-duty full-complement style designed to accept the higher loads and demands of performance enginesManufactured by Koyo® Torrington®Made in the USASpecsRiding StyleStreetUnitsEachTypeInnerProduct NameCam...

Feuling Parts #2074 - Inner Cam Bearing - Big Twin

Not for Twin Cam.FeaturesBearings are heavy-duty full-complement style designed to accept the higher loads and demands of performance enginesManufactured by Koyo® Torrington®Made in the USASpecsProduct NameCam BearingTypeInnerRiding StyleStreetUnitsEach

Feuling Parts #3010 - Head Bolt Kit - Panhead/Shovelhead

Head Bolt Kit - Panhead/ShovelheadFeaturesFeature precision j-form threads for optimum engagement, to prevent galling and promote more consistent torque loadingTensile strength rated at 180,000 psi; superior and stronger than OEM and grade 8 fastenersKit...

Feuling Parts #3011 - Head Bolt Kit - Ironhead

Head Bolt Kit - IronheadFeaturesFeature precision j-form threads for optimum engagement, to prevent galling and promote more consistent torque loadingTensile strength rated at 180,000 psi; superior and stronger than OEM and grade 8 fastenersKit includes...

Feuling Parts #3095 - Vented Dipstick - Polished - Touring

Vented Dipstick - Polished - TouringFeaturesBillet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella...

Feuling Parts #3096 - Vented Dipstick - Black - Touring

Vented Dipstick - Black - TouringFeaturesBillet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper...

Feuling Parts #3251 - Rocker Box Breather Rebuild Kit - M8

Rebuild kit for part # 0930-0239.FeaturesMade in the USAKit includes:Two Umbrella valvesTwo FiltersFour O-RingsSpecsMaterialPlasticUnitsKitRiding StyleStreetBase ColorBlueColor/FinishWhiteModelRocker BoxProduct NameBreather Rebuild

Feuling Parts #4056 - Solid Lifters - Race Series® - +0.843" to 0.8435" Oversize - Twin Cam | XL | Buell | M8

Solid Lifters - Race Series® - +0.843" to 0.8435" Oversize - Twin Cam | XL | Buell | M8FeaturesDesigned for engines with radical valve spring pressures and large lift camshaftOptimize valvetrain stability at high rpm, decrease valve float,...

Feuling Parts #4080 - Adjustable Pushrods - Race Series® - Evolution Big twin

Adjustable Pushrods - Race Series® - Evolution Big twinFeaturesMaintains maximum valve liftIncreased stiffness and column rigidity maximizing valve-train stability, increasing engine rpm horsepower and torque outputMinimal adjustment parameter eliminates...

Feuling Parts #7267 - Camchest - Race Series® - Reaper 508 - Twin Cooled - M8

Requires high lift valve springs.Includes:• Race Series High Volume Oil Pump• High Flow Billet Camplate• Reaper Series 508 Camshaft• Race Series Hydraulic Roller Lifters• One Piece Pushrods• Timken/Koyo Cam bearing• Rocker Arm Studs and Nuts• Gaskets•...