Hogtunes

Hogtunes 2-Channel Amp Adapter - '98-'13 FLTR (#RG2CH-AA)

Adapter Plate Kit for 2-Channel Amplifier Kit includes steel mounting plate, wire harnesses and all required hardware Required if mounting any Hogtunes 2-channel amplifier

Hogtunes 352 XLF Front Speakers (#352 XLF)

352 XLF Front Speakers Carbon fiber woofer cones Similar to Wild Boar Audio but for ‘98-’13 Bikes Oversized vented magnet controls heat for added reliability Better bass response and sound quality compared to 352F-AA speaker Studio grade crossover...

Hogtunes 4-Channel Amplifier Kit - '98-'13 FLTR (#REV 450-AA)

Rev Series 4-Channel Amplifier — 200 W 200-watt, 4-channel amplifier (50W x 4) Works best with 2 ohm speakers Pretuned to factory radio, so zero adjustments are required, making installation very simple All required wiring to complete installation is...

Hogtunes 4.25" Speakers - '86-'96 Dressers (#HT-44)

Replacement Speakers for '85-'96 Dressers Direct replacement speakers for 86-96 model bikes equipped with factory radios Fit behind factory grilles, includes 10mm soft rubber gaskets for an improved fit 4.25" speakers, 4 ohm, 2-way design Feature...

Hogtunes 7" Lower Woofer (#FL-7W)

7" Woofer Kit Included wire harness will plug into all Hogtunes amplifiers except USA 24.2 Includes 2 ohm 7" woofers, grilles and all required hardware Lower fairings required for installation, vented lower fairings recommended.

Hogtunes Amplifier Mounting Kit (#2CHSP)

Amplifier Mounting Kit Mounts 2-channel amp between radio and brake side speaker in '98-'13 FLH models Ideal for mounting second Hogtunes amplifier Kit includes steel mounting plate and all required hardware When aftermarket fairing support brackets...

Hogtunes Amplifier Mounting Plate - '98-'13 Road Glide (#RG4CH-AA)

Amplifier Adapter Mount Comes complete with everything needed for installation Allows installation of Rev or NCA series 2 or 4 channel amp in Road Glide Fairings Includes power harness extension for NCA amplifiers Not compatible with CVO models with...

Hogtunes Bluetooth Music Receiver/Controller - Harley Davidson (#BTS-AA)

In-Fairing Bluetooth® Music Receiver/Controller Adds Bluetooth® capability through factory radio AUX input Replaces factory ambient air temperature gauge Additional input for satellite radio/GPS, etc. Chrome rings fit perfectly Backlights for easy...

Hogtunes Bluetooth Receiver - Universal (#BTS-U)

Universal Bluetooth Receiver Bluetooth receiver easily hides inside fairing Can be “stuck” using supplied adhesive or “zip tied” in place Features track skip, play/pause, etc. device controls for streaming music 90° audio connector plugs into aux...

Hogtunes Dash Trim/Tweeter Pod - Harley Davidson (#HF-1)

Hog-Pod Dash Trim/Tweeter Pod Complete add-on tweeter kit Doubles as a fairing accent piece with decorative chrome trim (included) Disassembles easily to paint-match custom-painted fairings Black "see through" grilles can also be painted or chromed ...

Hogtunes Dual Amp/Speaker Kit - Ultra XL (#ULTRA KIT-XL)

Ultra KIT-XL Amplifer and Speaker Kit Complete kit with dual 225-watt amps and front and rear XL Series 5.25” speakers Includes metal mesh grilles for front speakers (PART #4405-0379) Amplifiers feature R.E.M.I.T. circuitry for excellent FM reception...

Hogtunes Fairing Speaker - 5"x7" - FLTR (#572RG-XLF)

XL Series Fairing Speakers Multi-stacked magnet assembly for higher power handling Sound is tailored to cut through exhaust and wind noise when bike is at speed Features carbon fiber woofer cone and titanium impregnated 1” tweeter Road Glide specific...

Hogtunes Front Speaker Kit - 225-Watt Amp (#225 RG KIT-AA)

225-Watt Amp/Front Speaker Kit Includes GEN3 front speakers and 225-watt, 2 channel amplifier Kit comes with everything required to complete installation Features R.E.M.I.T circuitry for excellent FM reception from a Class D amp 100% plug-and-play...

Hogtunes Front Speaker Kit - 225-Watt Amp (#225 SG KIT-AA)

225-Watt Amp/Front Speaker Kit Includes GEN3 front speakers and 225-watt, 2 channel amplifier Kit comes with everything required to complete installation Features R.E.M.I.T circuitry for excellent FM reception from a Class D amp 100% plug-and-play...

Hogtunes Front/Rear Speakers (#456F/R)

5.25" Front and Rear Speakers Gen 4, 5.25” 6-ohm speaker fits front and rear locations Vented magnet properly controls heat for added reliability Compatible with popular plug-and-play aftermarket radios Sound is tailored to cut through exhaust and...

Hogtunes Radio Cable/Audio Device (#0401)

1 Meter Stereo Audio Cable with 90º Ends 3.3' (One-meter) stereo audio cable with 90° ends Connects your MP3/Satellite radio/GPS to the "aux in" on your bike's radio High-quality gold-plated connectors Perfect accessory for HF-Bag

Hogtunes Rear Speaker Grills - FLH '98-'13 (#REAR-AA-GRILL)

Rear Speaker Grills Mesh separates easily from trim for painting, powdercoating, polishing, etc Feature 1mm thick mesh Grilles can be used with most brands of speakers

Hogtunes Rear Speaker Pods - Harley Davidson (#RR-SPKR-POD)

Rear Speaker Pods Included wiring is labeled to make connections to car radios easy Makes adding speakers to a tour pack easy Vinyl covering closely matches stock finish for an OEM look

Hogtunes Rev 225 Series 2-Channel Amplifier Kit FL '98-'13 (#REV225-AA)

225-Watt Amplifier Kit 225-watt, 2-channel fairing mounted amplifier (112.5W x 2 RMS @ 2-ohms) Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp Not compatible with CVO models with factory amplifiers installed 100%...

Hogtunes Saddlebag Lid Speaker - 5"x7" (#572-XL)

XL Series Lid Speakers Made to fit all years of factory saddlebag speaker lids and most aftermarket 5"x7” lids Speakers offer superior bass response and overall better sound, especially at riding speeds Features carbon fiber woofer cone and titanium...

Hogtunes Speaker Grilles - '96-'13 FLH (#SGF GRILL-AA)

Replacement Speaker Grilles 1mm thick metal mesh that comes painted semi-gloss black Metal mesh is thick enough to withstand painting, powder coating, polishing, etc. Replace the stock front speaker grill cloth for a much nicer look Metal mesh is...

Hogtunes Speaker Grilles - FLTR (#57 MESH)

Replacement Speaker Grilles 1mm thick metal mesh that comes painted semi-gloss black Metal mesh is thick enough to withstand painting, powder coating, polishing, etc. Replace the stock front speaker grill cloth for a much nicer look Metal mesh is...

Hogtunes Speaker Lid - 6"X9" XL Speakers (#692-XL LID-AA)

Saddlebag Lid and XL Speaker Kit Speakers angled toward rider for best sound Includes 200 watt 2 ohm XL Series 6x9” speakers made for motorcycle environment (200 Watts per speaker) Built-in water drainage system keeps everything dry High quality/high...

Hogtunes Speaker Lid Kit - w/o Speakers (#HT-LID)

Saddlebag Speaker Lid Kit Kit includes High-Impact ABS replacement saddlebag lids, lid tethers, grilles, grommets, wire harness and required hardware Disassembles easily for paint Accepts OEM and aftermarket latches Required amplifier and optional...