Custom Cycle Engineering

Custom Cycle Engineering #AS5867 - Disc Spacer - '84 - '99

1.050'' disc spacer (required for dual-disc applications on '84-'99 models).FeaturesAllows the use of narrow glide 19" or 21" wheel (found on FXD and XL models) to be installed in a 41mm Wide Glide front-endIncludes aluminum disc spacer (second...

Custom Cycle Engineering #CCE 2014-1 - Adjustable Engine Mount - Dyna

Adjustable Engine Mount - DynaFeaturesReplace stock front engine bracket with custom slotted bracket with alignment linesAllows the rider to dial in the engine to perfect alignmentSlides the engine left or right using the same alignment principals as FXR...

Custom Cycle Engineering #CCE2007-1 - Swingarm Conversion Retrofit Kit - Standard

Swingarm Conversion Retrofit Kit - StandardFeaturesReplaces stock Cleve Bloc style swingarm bushings with spherical bearingsDramatically changes handling and tracking of Dresser modelsSpherical bearings greatly reduce the stiction at the swingarm pivot,...

Custom Cycle Engineering #CCE2007-2 - Swingarm Conversion Retrofit Kit - W/ Pivot Shaft

Swingarm Conversion Retrofit Kit - W/ Pivot ShaftFeaturesReplaces stock Cleve Bloc style swingarm bushings with spherical bearingsDramatically changes handling and tracking of Dresser modelsSpherical bearings greatly reduce the stiction at the swingarm...

Custom Cycle Engineering #CCE5833 - Rocker Cover - Finned - Polished - EVO

Rocker Cover - Finned - Polished - EVOFeaturesOriginal Randy Smith designTop covers onlyFeatures a guaranteed fit and are compatible with the very latest breather system (early breathers too)Include adequate clearance for all factory framesDomestic...

Custom Cycle Engineering #CCE9734 - Foot Peg Elevators - Male Mount

Foot Peg Elevators - Male MountFeaturesUsed to raise the driver footpegs about 1"Include mounting blocks, button head bolts and nutsMade in the USASpecsMounting StyleMale MountProduct NameRelocation BracketMounting...

Custom Cycle Engineering #DMM 2014-1E - Front Motor Mount - Dyna

Front Motor Mount - DynaFeaturesMotor mount system replaces the inadequate stock mountsMade in the U.S.A.SpecsRiding StyleStreetUnitsEachColor/FinishBlackBase ColorBlackMounting PositionFrontTypeEngineProduct NameMount

Custom Cycle Engineering #DMM 2014-2 - Rear Motor Mount - Dyna

Rear Motor Mount - DynaFeaturesMotor mount system replaces the inadequate stock mountsMade in the U.S.A.SpecsProduct NameMountBase ColorBlackRiding StyleStreetUnitsEachMounting PositionRearColor/FinishBlackTypeEngine

Custom Cycle Engineering #SAR2008-1 - Swingarm Retrofit Kit - Standard

Swingarm Retrofit Kit - StandardFeaturesRetrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring modelsNo need to alter transmission housingWill require the purchase of a 02-08 style OEM swingarm with bearings, rear caliper, 1"...

Custom Cycle Engineering #SAR2008-2 - Swingarm Retrofit Kit - W/ Pivot Shaft

Swingarm not included.FeaturesRetrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring modelsNo need to alter transmission housingWill require the purchase of a 02-08 style OEM swingarm with bearings, rear caliper, 1" diameter...

Custom Cycle Engineering #SHS9900-1 - End Cover - Solenoid /Starter Button - Harley Davidson

End Cover - Solenoid /Starter Button - Harley DavidsonFeaturesBillet aluminum constructionReplaces the solenoid end cover and includes mounting screwsFits most '91-'16 OEM and aftermarket starter motors (except Compu-Fire, 2.0/2.4 Terry starters)Made in...

Custom Cycle Engineering #SHS9900-3 - End Cover - Solenoid /Starter Button - Harley Davidson

End Cover - Solenoid /Starter Button - Harley DavidsonFeaturesBillet aluminum constructionReplaces the solenoid end cover and includes mounting screwsFits most '91-'16 OEM and aftermarket starter motors (except Compu-Fire, 2.0/2.4 Terry starters)Made in...

Custom Cycle Engineering #SHS9904-1 - End Cover - Solenoid /Starter Button - Harley Davidson

End Cover - Solenoid /Starter Button - Harley DavidsonFeaturesBillet aluminum constructionReplaces the solenoid end cover and includes mounting screwsFits most '91-'16 OEM and aftermarket starter motors (except Compu-Fire, 2.0/2.4 Terry starters)Made in...

Custom Cycle Engineering #SHS9905-1 - End Cover - Solenoid /Starter Button - Harley Davidson

End Cover - Solenoid /Starter Button - Harley DavidsonFeaturesBillet aluminum constructionReplaces the solenoid end cover and includes mounting screwsFits most '91-'16 OEM and aftermarket starter motors (except Compu-Fire, 2.0/2.4 Terry starters)Made in...

Custom Cycle Engineering #TB1833-1 - Wide Glide Tweek Bar - 41 mm - Chrome

Wide Glide Tweek Bar - 41 mm - ChromeFeaturesOriginal Randy Smith designAs in the good old days with extended front tubes, the need for a tweek bar is here againVast improvement over the tweek bars used in the 60s and 70sFeature lightening holes with a...

Custom Cycle Engineering TB2612-1 - Fork Brace - Chrome - 39 mm - '99-'05 FXDWG | '88-'20 XL

FeaturesOriginal Randy Smith designManufactured from a solid piece of 6061 T-6 aluminum, then chrome-platedDesigned with a compound arch for greater torsional stiffness, which means not only less deflection and twisting but more fender clearanceBolts to...

Custom Cycle Engineering TSL2014-1 - Top Stabilizer Link - Dyna

FeaturesReduces engine vibration and aligns power trainAdjustable rubber-isolated designGreatly reduces vibration especially at high speedsReplaces stock link which is metal-to-metal from top motor mountSpecs Mounting Position: Top Riding Style: Street...

Custom Cycle Engineering WC-1550-84 - Narrow-To-Wide Glide Wheel Conversion Kit

FeaturesOriginal Randy Smith designAllow the use of narrow glide 19" or 21" wheel (found on FX, FXR, FXD and XL models) to be installed in a 41 mm Wide Glide front-endInclude aluminum disc spacer (second spacer for dual disc available), socket head...