S&S Cycle

S&S Cycle #310-0878 - Crankcase - 3.937" Bore - Alternator Style - Wrinkle Black - Dyna

Crankcase for Dyna 4.125" bore crankcase can be used as a foundation for a custom engine or replacement for T111, T124, or T143 Stock looking, but stronger; thicker wall sections and superior...

S&S Cycle #920-0144 - Big Bore Kit - 83.50 mm - 750 cc - Royal Enfield® 650 Twin

Big Bore Kit Increases bore from stock Increase compression ratio from 9.5:1 to 11.0:1 Kit includes cylinder sleeves, pistons and head gasket Made in the USA

S&S Cycle #920-0145 - Big Bore Kit - 90.00 mm - 865 cc - Royal Enfield 650 Twin

Big Bore Kit Increases bore from stock Increase compression ratio from 9.5:1 to 11.0:1 Kit includes cylinder sleeves, pistons and head gasket Made in the USA

S&S Cycle #31-4104A - Oil Filter - Chrome

Oil Filter Sturdy steel canister houses the finest filtering media and internal components available Canister is slightly smaller in diameter than stock filters to make them easier to remove and...

S&S Cycle #31-4103A - Oil Filter - Black

Oil Filter Sturdy steel canister houses the finest filtering media and internal components available Canister is slightly smaller in diameter than stock filters to make them easier to remove and...

S&S Cycle #94-1294X - Replacement Piston Rings - 3.875" - +0.005"

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #92-1201 - Piston Kit - For 95" Big Bore Kit - 3.875" - +0.010"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #92-1200 - Piston Kit - For 95" Big Bore Kit - 3.875" - Standard

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #92-1204 - Piston Kit - For 95" Big Bore Kit - 3.875" - +0.005"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #94-1290X - Replacement Piston Rings - 3.875" - Standard

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #94-1291X - Replacement Piston Rings - 3.875" - +0.010"

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #91-7210 - Cylinder - 3.500" - Natural Finish - Evolution Big Twin

Evolution-Style Aluminum Cylinders 3.500" bore cylinders are for 80" or 89" big twins with stock, S&S® Performance, or Super Stock® heads Thicker castings, larger cooling fins, and better wear...

S&S Cycle #33-4275 - 4 Gear Cam Gear Drive Kit - Twin Cam

Gear for Gear-Driven Cams A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear...

S&S Cycle #93-5096 - Adjustable Pushrods - Twin Cam

Adjustable Pushrods .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or removal Made in the U.S.A.

S&S Cycle #33-5175 - Cam Install Kit - Chain Drive

Cam Installation Kit Kits include all required parts needed when servicing or changing gear- or chain-drive cams in a Twin Cam motor Made in the U.S.A.

S&S Cycle #34-7800 - Connecting Rod Assembly - XL

Heavy-Duty Connecting Rod Sets High-quality, heavy duty rod sets come complete and ready to install Set includes front and rear rods, crankpin and nuts, steel cages and roller bearings Rods are...

S&S Cycle #31-0000 - Engine Case -Super Stock® - 3.500" - Evolution Big Twin

Super Stock® Alternator Style Engine Case 3.5" stock bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that...

S&S Cycle #31-6271 - Oil Pump Replacement Gasket Kit

Replacement Billet Oil Pump Gasket Kit Made in the U.S.A.

S&S Cycle #31-0003 - Engine Case - Super Stock® - 3.500" - Big Twin

Super Stock® Alternator Style Engine Case 3.5" stock bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that...

S&S Cycle #31-0001 - Engine Case - Super Stock® Big Bore - 3.625" - Evolution Big Twin

Super Stock® Big Bore Engine Case 3.625" big bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that mounts on...

S&S Cycle #31-0005 - Engine Case - Super Stock® - 3.500" - Evolution Big Twin

Super Stock® Alternator Style Engine Case 3.5" stock bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that...

S&S Cycle #31-0004 - Engine Case - Super Stock® Big Bore - 3.625" - Big Twin

Super Stock® Big Bore Engine Case 3.625" big bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that mounts on...

S&S Cycle #31-6200 - Billet Oil Pump - Standard Cover

Billet Oil Pump Kit Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure...

S&S Cycle #94-1300X - Replacement Piston Rings - 4.000" - Standard

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA