S&S Cycle

S&S Cycle #55-1014 - Cylinder Head Temp Sensor - Harley Davidson

Intelligent Spark Technology (IST) Ignition System Sensor The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an...

S&S Cycle #53-0040 - Rocker Cover Wrench Set

Rocker Box Wrench Set Four wrenches of different lengths for those hard-to-get-to rocker box screws For use on all Big Twin and XL Evolution-style motors Made in the U.S.A.

S&S Cycle #900-1013 - Rocker Arm Stud Kit - M8

Rocker Arm Stud Four required per engine, sold each Zinc-plated 5/16"-18, 5/16"-24 1.910" Made in the U.S.A.

S&S Cycle #900-1006 - Head Bolt Kit - 12-Point - M8

Head Bolt Kit Cold-formed 9/16" 12-point head with integral washer Stronger material than stock Head bolts 200,000 psi ultimate tensile strength Reusable

S&S Cycle #33-5180 - Camshaft Kit - 625G - Gear Drive - Twin Cam

625G Gear Drive Camshaft Kit For 95/96/103 and 110 cubic inch engines with compression ratios from 10.0 to 10.75:1 Strongest from 3000-6000 rpm Increase valve timing accuracy by eliminating timing...

S&S Cycle #33-5178 - Camshaft Kit - 570G Gear Drive - Twin Cam

570G Camshaft Kit Designed for 88" to 103" CID engines with compression ratios between 9:1 and 10:1 Strongest from 3200-3700 rpm Increases valve timing accuracy by eliminating timing chain lash...

S&S Cycle #90-2026 - Exhaust Valve - 1.575" - For 79 cc S&S Heads

Replacement Stainless Steel Valves for S&S Heads Heads are also found on S&S Twin Cam-style motors and use 1.940" intake valves and 1.575" exhaust valves Made in the USA For S&S heads.

S&S Cycle #33-5177 - Camshaft Kit - 510G Gear Drive - Twin Cam

510G Camshaft Kit Cams designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1 Kit includes camshafts with inner gears, outer cam drive gear kit and camshaft...

S&S Cycle #94-1295X - Replacement Piston Rings - 3.875" - Standard

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #33-5179 - Camshaft Kit - 585G - Gear Drive -Twin Cam

585G Gear Drive Camshaft Kit Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1 Reverses the rear cam's direction of rotation, providing additional...

S&S Cycle #94-1297X - Replacement Piston Rings - 3.875" - +0.020"

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #94-1296X - Replacement Piston Rings - 3.875" - +0.010"

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #560-0241 - Inner Primary Bearing Race

Inner Primary Mainshaft Bearing Race Eliminates bearing race movement that can cause costly damage to transmission seal and output bearing A must for high-performance applications Made in the U.S...

S&S Cycle #330-0737 - Cam Chain Tensioner - M8

Cam Chain Tensioner Precision-machined from 6061 billet aluminum Larger diameter piston and tighter tolerance fit for more consistent pressure Thicker pad for longer wear between service Direct...

S&S Cycle #330-0621 - Outer Cam Drive Gear Kit - M8

Pinion Gear for Two-Gear Driven Cams A two-gear set is required for gear-driven cams that do not come with secondary cam gears; be sure to select the appropriate outer cam drive gear, pinion drive...

S&S Cycle #330-0626 - Pinion Gear - Undersized - M8

Pinion Gear for Two-Gear Driven Cams A two-gear set is required for gear-driven cams that do not come with secondary cam gears; be sure to select the appropriate outer cam drive gear, pinion drive...

S&S Cycle #106-5723 - Hydraulic Tensioner Block Off Kit

Hydraulic Tensioner Oil Block Off Cover Block off cover for S&S Complete Gear Drive Cam Chest Kit

S&S Cycle #330-0623 - Cam Gear Install Kit - M8

Cam Installation Kit Kit includes all required parts needed when servicing or changing gear- or chain-drive cams in a Milwaukee 8 motor Made in the USA

S&S Cycle #330-0622 - Pinion Gear - Standard - M8

Pinion Gear for Two-Gear Driven Cams A two-gear set is required for gear-driven cams that do not come with secondary cam gears; be sure to select the appropriate outer cam drive gear, pinion drive...

S&S Cycle #31-4081 - Camshaft Outer Ball Bearing - Twin Cam

Camshaft Outer Ball Bearing Superior-quality OE replacement bearings Sold each Made in the U.S.A.

S&S Cycle #330-0619 - Cam Chain Install Kit - M8

Cam Installation Kit Kit includes all required parts needed when servicing or changing gear- or chain-drive cams in a Milwaukee 8 motor Made in the USA

S&S Cycle #106-1348 - Key

Parallel Key Steel individual key .188” x .150” x .420” Made in the U.S.A.

S&S Cycle #310-0870 - Motor Install Kit - Black - FXD

Long-Block Installation Kit High Compression, 10.8:1 for the ultimate in street performance No fuel system or ignition systems included Special head machining fits stock length intake manifolds...

S&S Cycle #106-3883 - Billet Tappet Covers - Chrome - Twin Cam

Billet Tappet Covers CNC-machined from 6061 T-6 billet aluminum Billet material provides extra strength and dimensional stability over a wide temperature range; is also free of voids which can...