New Items

Andrews #272110 - High-Lift Valve Springs

High-Lift Valve Springs Provide correct spring force for any of our performance cams when used in 74" and 80" motors Max lift; installation does not require complicated machining but does require proper valvetrain setup Made in the U.S.A.

Andrews #273120 - Valve Spring Collars

Valve Spring Upper Collars Similar to stock 80-style parts, but lower profile for easier installation of higher lift cams Required parts if you use 80-style valve guides that utilize "K" line stem seals Heat-treated steel For 74" and 80" motors Made...

Andrews #276150 - Medium-Lift Upper Spring Collar Set

Medium-Lift Upper Spring Collar Set Intended to work with stock springs and add approximately .060" spring travel with no other modifications on 66-84 74" and 80" motors The easy way to install B or #2 cams in stock heads Made in the U.S.A.

Andrews #277160 - Low-Profile Lower Spring Collars - XL

Low-Profile Lower Spring Collars Similar to the late H-D collars Will provide .060" more spring travel than stock collars Made in the U.S.A.

Andrews #290294 - Pulley - 29 Tooth

Belt Drive Transmission Pulleys Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290300 - Pulley - 30 Tooth

Belt Drive Transmission Pulleys Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290304 - Pulley - 30 Tooth

Belt Drive Transmission Pulleys Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290314 - Belt Pulley - 31-Tooth - '94-'06

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290320 - Belt Pulley - 32-Tooth - '85-'93

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290324 - Belt Pulley - 32-Tooth - '94-06

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290330 - Belt Pulley - 33-Tooth - '85-'93

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290334 - Belt Pulley - 33-Tooth - '94-'06

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290340 - Pulley - 34 Tooth

Belt Drive Transmission Pulleys Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #290344 - Pulley - 34 Tooth

Belt Drive Transmission Pulleys Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

Andrews #291113 - EV13 Cam - Evolution

EV13 Cam These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Bolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV cams Uses stock springs; works with carbs or...

Andrews #291117 - EV31 Cam - Evolution

EV31 Cam Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are utilized...

Andrews #291123 - EV23 Cam

EV23 Cam These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Bolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleys Uses stock springs; works with carbs or fuel injection ...

Andrews #291127 - EV27 Cam - Evolution

EV27 Cam These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Bolt-in street cam with fast open and close ramps Uses stock springs; works with carbs or fuel injection Pulls from 1500 to 6000 rpm Similar...

Andrews #291130 - EV3 Cam

EV3 Cam These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float A 6000+ rpm cam for stock heads and springs with hydraulic lifters Bolt-in cam for light bikes (FXRS, etc.) adds significant mid-range power without...

Andrews #291138 - Cam - EV38 Grind - Evolution Big Twin

Cam for Big Twin More mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs Cams are computer designed and precision ground from...

Andrews #291146 - Cam - EV46 Grind - Evolution Big Twin

Cam for Big Twin More mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs Cams are computer designed and precision ground from...

Andrews #291150 - Cam - EV5 Grind - Evolution Big Twin

Cam for Big Twin More mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs Cams are computer designed and precision ground from...

Andrews #291151 - EV51 Cam - Big Twin

EV51 Cam These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Easy installation Works with stock hydraulics Long duration for modified street motors Power range from 3000-6500 rpm Must check coil bind,...

Andrews #291159 - EV59 Cam - Big Twin

EV59 Cam These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Designed for modified 80" to 88" motors Very broad powerband to 6000 rpm For use with high lift springs and collars Must check coil bind,...