S&S Cycle

S&S Cycle #11-2383 - Throttle Shaft - Super E Carburetor

Throttle Shaft Made in the USA

S&S Cycle #11-2391 - Carburetor Body Assembly - Super G

Carburetor Body Assembly Carb body only, no additional parts installed Made in the USA

S&S Cycle #11-2381 - Carburetor Body Assembly - Super E

Carburetor Body Assembly Carb body only, no additional parts installed Made in the USA

S&S Cycle #11-2197 - Racing Float Needle - Super E/G Carburetor

Racing Float Needle Made in the USA

S&S Cycle #500-0860 - Internal Retaining Ring

Internal Retaining Ring Pack Internal Retaining Ring Pack

S&S Cycle #500-0859 - Internal Retaining Ring

Internal Retaining Ring Pack Internal Retaining Ring Pack

S&S Cycle #500-0326 - Oil Pump O-Ring Kit - Twin Cam

Oil Pump O-ring Kit Oil pump o-ring kit for Twin Cam models

S&S Cycle #500-0861 - Viton O-Ring - 14 mm x 1.5 mm - 5 Pack

O-Ring O-Ring for Super E & G Carburetors

S&S Cycle #310-0546 - Oil Pump Screen - Twin Cam

Oil Pump Screen OEM replacement parts for S&S Oil Pump

S&S Cycle #910-0846 - 132" Big Bore Cylinder Kit - Black - M8

Big Bore Cylinder Kit Bolt-on without requiring machining of the crankcase Original engine serial numbers are retained MLS (multi-layered steel) head gaskets Retains stock engine height Includes...

S&S Cycle #910-0845 - 132" Big Bore Cylinder Kit - Black/Highlighted Fins - M8

Big Bore Cylinder Kit Bolt-on without requiring machining of the crankcase Original engine serial numbers are retained MLS (multi-layered steel) head gaskets Retains stock engine height Includes...

S&S Cycle #910-0844 - 129" Big Bore Cylinder Kit - Black - M8

Big Bore Cylinder Kit Bolt-on without requiring machining of the crankcase Original engine serial numbers are retained MLS (multi-layered steel) head gaskets Retains stock engine height Includes...

S&S Cycle #910-0843 - 129" Big Bore Cylinder Kit - Black/Highlighted Fins - M8

Big Bore Cylinder Kit Bolt-on without requiring machining of the crankcase Original engine serial numbers are retained MLS (multi-layered steel) head gaskets Retains stock engine height Includes...

S&S Cycle #106-1340 - Pushrod Cover Kit - Chrome

Pushrod Cover Kit Stock height Kit includes top and bottom covers, cover caps, cover springs, and spring washers

S&S Cycle #930-0129 - Pushrod Cover Keeper Set - Chrome - 2.200"

Pushrod Cover Keeper Set For use in custom applications where stock keepers won't fit Chromed steel finish Sold in kits of four assemblies; enough for one engine

S&S Cycle #330-0709 - High-Performance Camshaft Kit

High-Performance Camshaft Kit with Shims Adjustable cam timing so you can dial in the power curve Builds power sooner and holds it for longer Compatible with high-compression pistons Higher lift...

S&S Cycle #31-4057 - Right Bearing - White - XL

Engine Bearings Made in the U.S.A. Replacement right side crankcase main bearing assemblies

S&S Cycle #31-4056 - Right Bearing - Red - XL

Engine Bearings Made in the U.S.A. Replacement right side crankcase main bearing assemblies

S&S Cycle #31-4058 - Right Bearing - Green - XL

Engine Bearings Made in the U.S.A. Replacement right side crankcase main bearing assemblies

S&S Cycle #31-4055 - Right Bearing - Blue - XL

Engine Bearings Made in the U.S.A. Replacement right side crankcase main bearing assemblies

S&S Cycle #900-0569 - 124" Hot Set Up® Engine Performance Kit - Black

124" Hot Set Up® Engine Performance Kit The S&S Hot Setup kit for Twin Cams allows a Twin Cam owner to convert a stock engine to 124" using the stock crankcases Includes S&S heads 91cc, 4.125" bore...

S&S Cycle #310-0561 - Oil Pump Supply Rotor - TC3

TC3 Oil Pump Rotor Oil pump rotor for Twin Cam models

S&S Cycle #34-2602 - Crankpin - XL

Crankpin Assembly Include crankpin, nuts and key Made in the U.S.A.

S&S Cycle #310-0856 - Crankcase - Black

Dyna Engine Case Stock or 4-1/8" bore crankcases to be used as a foundation for a custom engine or replacement for T111, T124, or T143 Stock looking, but stronger; thicker wall sections and...