Jims

Jims 2320 - Lock Bar - Primary/Drive System - M8 Softail

Primary Lock Bar for M8 Softail The length of the bar is designed for solid engagement in between the engine compensating sprocket and clutch sprocket Made from aircraft quality steel and plated in...

Jims 5512 - Shifter Shaft Tool - Foot - M8

Milwaukee-Eight Shifter Shaft Bushing Remover & Installer Designed to remove the old bushing with a unique knurled driver and receiver cup A new installation driver is included in the kit to...

Jims 1285 - Cam/Crank Lock Tool - Sprocket

Sprocket Lock Tool Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts Comes with instructions Made in the U.S.A.

Jims 25593-57 - Pinion Shaft Bushing - XL

Pinion Shaft Bushing Quality pinion shaft bushings Made in the U.S.A.

Jims 2171 - Cam Cover Large O-Ring

Cam Cover O-Ring Fits most cam covers Made in the U.S.A.

Jims 2170 - Cam Cover Small O-Ring

Cam Cover O-Ring Fits most cam covers Made in the U.S.A.

Jims 8028 - 5-Speed Transmission Assembly

5-Speed Transmission Assembly Gears and shafts are CNC-machined from materials that exceed 8620 steel Hand-assembled and matched for a .0002" tolerance between the shafts Assembly includes chrome...

Jims 1021 - 5-Speed Transmission Rebuild Kit - Big Twin

Transmission Rebuild Kit Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 5-, or 6-speed transmission Made in the U.S.A.

Jims 1020 - 5-Speed Transmission Rebuild Kit - Big Twin

Transmission Rebuild Kit Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 5-, or 6-speed transmission Made in the U.S.A.

Jims 8028DS - 5-Speed Transmission Assembly

5-Speed Transmission Assembly Gears and shafts are CNC-machined from materials that exceed 8620 steel Hand-assembled and matched for a .0002" tolerance between the shafts Assembly includes chrome...

Jims 1019 - 5-Speed Rebuild Kit

A Cut Above™ Time-Saver 5-Speed Transmission Master Kit Includes bearings, retaining rings, spacers, locknuts, gaskets and seals Made in the U.S.A.

Jims 8000C6 - 6-Speed Overdrive Transmission

6-Speed Overdrive Transmission Come with close-ratio 1st gear, stock 2nd through 5th gears and .86:1 "overdrive" 6th gear Gears are CNC-machined; shifter dogs are machined with lead-in ramps for...

Jims 33715-85AC - Shifter Lever - Chrome

Chrome Shifter Rod Lever Steel construction Made in the U.S.A.

Jims 1370 - Valve Keepers - Big Twin

Valve Lock Keys Made from the highest grade materials and heat-treated to JIMS strict standards Feature a 10° lock angle Work well with JIMS titanium valve spring retainers Made in the U.S.A.

Jims 1350K - Valve Spring Kit - Evolution - Big Twin

Valve Spring Kit Incorporate an interference double-spring design with a damper to control harmonics Engineered for maximum performance in severe applications such as high compression and big-inch...

Jims 35042-91 - Mainshaft - Splined Clutch

Transmission Mainshaft

Jims 24022-90 - Gear-Side Pinion Shaft Nut

Gear-Side Pinion Shaft Nut 5/8"-24 left-hand threads

Jims 2283 - 5-Speed Transmission Door Puller

Transmission Door Puller Removes transmission door with gears and shaft attached Puller will not damage door bearings Made in the U.S.A.

Jims 24017-80 - Sprocket Shaft Nut

Flywheel-Side Motor Sprocket Shaft Nut Heavy-duty nut fits flywheel-side of sprocket shaft 1-1/8"-16 threads Made in the U.S.A.

Jims 24023-54 - Gear-Side Pinion Shaft Nut

Gear-Side Pinion Shaft Nut 5/8"-24 left-hand threads

Jims 2234 - Primary Drive Lock Tool

Primary Drive Locking Tool Use on all primaries between front primary chain and motor sprocket Made in the U.S.A.

Jims 24016-80 - Pinion Shaft Nut - 3/4-20 Thread

Flywheel-Side Pinion Shaft Nut Heavy-duty nut fits flywheel-side of pinion shaft 3/4"-20 thread Made in the U.S.A. Check rod clearance.

Jims 24331-36 - Wrist Pin Bushing - XL

Wrist Pin Bushing Machined from solid bronze bar stock Hold concentricity to less than .0002" Lead-in edge for easy installation Made in the U.S.A.

Jims 25581-70 - Cam Bushing - Big Twin

Cam Cover Bushing Bushings are made from solid bronze bar stock Machined in one operation with a tolerance of .0002" Feature a lead-in for ease of installation Made in the U.S.A.