Jims

Jims 24023-54 - Gear-Side Pinion Shaft Nut

Gear-Side Pinion Shaft Nut 5/8"-24 left-hand threads

Jims 2234 - Primary Drive Lock Tool

Primary Drive Locking Tool Use on all primaries between front primary chain and motor sprocket Made in the U.S.A.

Jims 24016-80 - Pinion Shaft Nut - 3/4-20 Thread

Flywheel-Side Pinion Shaft Nut Heavy-duty nut fits flywheel-side of pinion shaft 3/4"-20 thread Made in the U.S.A. Check rod clearance.

Jims 24331-36 - Wrist Pin Bushing - XL

Wrist Pin Bushing Machined from solid bronze bar stock Hold concentricity to less than .0002" Lead-in edge for easy installation Made in the U.S.A.

Jims 26317-68A - Oil Pump Idler Gear - Big Twin

Oil Pump Component Oil Pump Component for Big Twin models

Jims 25581-70 - Cam Bushing - Big Twin

Cam Cover Bushing Bushings are made from solid bronze bar stock Machined in one operation with a tolerance of .0002" Feature a lead-in for ease of installation Made in the U.S.A.

Jims 26326-62A - Feed Idler Oil Pump Gear - Big Twin

Oil Pump Component Oil Pump Component for Big Twin models

Jims 2280 - Cam Bearing Alignment Tool

Cam Bearing and Bushing Alignment Tool Use to check the alignment of cam bearing to cam cover bushing to within .0003" of centerline Binding of tool indicates misalignment of cam cover and bushing ...

Jims 24029-KIT - Sprocket Shaft Spacers - Set of 8

Motor Sprocket Shaft Spacer Kit Spacers are machined to a 32-micron, burr-free finish for extended seal life Made to fit the sprocket shaft oil seal Eight-piece kit contains one of each of the...

Jims 26346-36 - Oil Pump Shaft - Big Twin

Oil Pump Drive Shaft Top-quality replacement shaft precision-ground to tight tolerances Made in the U.S.A.

Jims 25581-705 - Cam Bushing - +.005 - Big Twin

Cam Cover Bushing Bushings are made from solid bronze bar stock Machined in one operation with a tolerance of .0002" Feature a lead-in for ease of installation Made in the U.S.A.

Jims 33334-85 - Transmission Sprocket Spacer

Transmission Sprocket Spacer — 5 Speed Smooth finish for a longer seal life 1.7" i.d. Made in the U.S.A.

Jims 1110 - Camshaft Pinon Gauge Pins 105

Cam and Pinion Gear Gauge Pins Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A.

Jims 26315-68A - Oil Pump Drive Gear - Big Twin

Oil Pump Component Oil Pump Component for Big Twin models

Jims 33288-37 - Kickstarter Bushing Kit - 4 Speed

Kickstarter Bushing Kit Made in the U.S.A.

Jims 24334-36 - Wrist Pin Bushing - Big Twin

Wrist Pin Bushing Machined from solid bronze bar stock Hold concentricity to less than .0002" Lead-in edge for easy installation Made in the U.S.A.

Jims 24600-58B - Crankcase Bushing

Right-Side Crankcase Bushing 360° oiling Made in the U.S.A.

Jims 2188 - Camshaft Bearing Installer

Inner Cam Bearing Installation Tool Easily presses the inner cam bearing smoothly into the right case with the cases assembled to the proper depth Made in the U.S.A.

Jims 1052 - Oil Pump Snap Ring Installer

Oil Pump Snap Ring Installer Just apply oil to ring expander, slip ring up to the big end of ring expander, hold up to the end of the shaft, then push ring onto the shaft with sleeve Easily install...

Jims 1754 - Flow Pro 1 Billet Oil Pump Top Line - Polished

Flow Pro 1 Billet Oil Pump Complete Assembly CNC-machined feed and return gears increase pump flow and return volume Pumps include cover, gears, drive shaft, seals, gaskets, woodruff keys,...

Jims 1164 - Pistons Support Plate

Piston Support Plate Support plate gives a non-marring, flat surface to push piston bottoms against when installing rings or cylinders Made in the U.S.A.

Jims 26328-74 - Feed Drive Oil Pump Gear - Big Twin

Oil Pump Component Oil Pump Component for Big Twin models

Jims 24002-70 - Sprocket Shaft Oil Seal Spacer

Motor Sprocket Shaft Spacer Machined to a 32-micron, burr-free finish for extended seal life Made in the U.S.A.

Jims 1147 - Alternator Rotor Puller

Alternator Rotor Tool A must-have tool for 45A charging systems; will also work on any Harley-Davidson® alternator system that has threaded puller holes Tool protects threads on sprocket shaft from...