Motion Pro

Motion Pro 08-0182 - Cable Luber - 1050027

Clamps over housing and wire allowing an aerosol can to be connected Once lube runs out the far end, the cable is lubricated Used to inject lubricant into cable housing

Motion Pro 08-0360 - 3/8" Mini T-Handle Tool

Use handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners Compact shaft length for tight access and easy transport Use with sockets, hex drives,...

Motion Pro 12-0078 - Stepless Clamps - 14.8-18.0 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 12-0082 - Stepless Clamps - 13.2-15.7 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 08-0D35 - Jumbo Chain Replacement Pin

The extractor pin is precisely guided by a removable guide, ensuring long pin life Replacement pin for the Jumbo Chain Tool�

Motion Pro 12-0074 - Stepless Clamps - 7.8-9.5 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 12-0084 - Stepless Clamps - 8.8-10.5 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 12-0077 - Stepless Clamps - 12.0-14.5 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 12-0075 - Stepless Clamps - 10.3-12.8 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 08-0339 - Screw - Tappet Tool - Oil Filter

O-ring design retains the tool in wrench or socket while flange design allows downward force to be applied to tool Designed for use with 7/16" combination wrench to allow for maximum rotation...

Motion Pro 12-0076 - Stepless Clamps - 10.8-13.3 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 12-0028 - O-Clips - 9/16" - 10-Pack

Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Snag-free and easy to install Made in the U.S.A.

Motion Pro 08-0359 - 1.4" Mini T-Handle Tool

Use handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners Compact shaft length for tight access and easy transport Use with sockets, hex drives,...

Motion Pro 12-0081 - Stepless Clamps - 9.6-11.13 mm

Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design narrow band provides concentrated seal compression 360� Stepless� design with no gaps on inner...

Motion Pro 12-0025 - O-Clips - 5/16" - 10-Pack

Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Snag-free and easy to install Made in the U.S.A.

Motion Pro 12-0026 - O-Clips - 7/16" - 10-Pack

Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Snag-free and easy to install Made in the U.S.A.

Motion Pro 12-0027 - O-Clips - 1/2" - 10-Pack

Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Snag-free and easy to install Made in the U.S.A.

Motion Pro 08-0060 - Chain Rivet Pin Tip - 3 mm

For use with Motion Pro's chain riveting tool Different pin sizes to fit most chains

Motion Pro 08-0059 - Chain Rivet Pin Tip - 2 mm

For use with Motion Pro's chain riveting tool Different pin sizes to fit most chains

Motion Pro 08-0062 - Wedge Tip for Chain Rivet Tool

Replacement wedge tip for use with Motion Pro's Chain Breaker and Riveting Tool

Motion Pro 08-0061 - Chain Rivet Pin Tip - 4 mm

For use with Motion Pro's chain riveting tool Different pin sizes to fit most chains

Motion Pro 08-0002 - Chain Breaker Pin

The maximum pix extension required to drive out the chain link is determined by measuring the chains width from outside face plate to outside face plate Durable drive pin for Motion Pro Compact...

Motion Pro 08-0183 - Valve Core Remover - 1049876

Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve) Perfect tool pack accessory

Motion Pro 01-0030 - Throttle Clips - SG145

Replacement clips