Hardware & Accessories

Drag Specialties Fuel Petcock - Forward - Chrome - 22 mm

Fuel Petcock Includes filter screen, three-position control and high fuel flow 22 mm thread fittings

Drag Specialties Fuel Petcock - Forward Facing - Chrome

Fuel Petcock High-flow petcocks feature a round, smooth body Three-position knob (on, off, reserve) with a 1/4" fuel outlet and 5/16" hose barb Position is determined based on the petcock being mounted on the left side of the tank with the petcock lever...

Drag Specialties Fuel Petcock - Rear - Gloss Black - 22 mm

Fuel Petcock Includes filter screen, three-position control and high fuel flow 22 mm thread fittings

Drag Specialties Fuel Petcock - Rear Facing - Chrome

Fuel Petcock High-flow petcocks feature a round, smooth body Three-position knob (on, off, reserve) with a 1/4" fuel outlet and 5/16" hose barb Position is determined based on the petcock being mounted on the left side of the tank with the petcock lever...

Drag Specialties Fuel Tank Outlet Plug - Chrome

Fuel Tank Outlet Plug Use to plug the outlet on fuel tanks that use either the fuel-injection or petcock adapter Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use Includes O-ring seal

Drag Specialties Handlebar Clamp - Finned

Handlebar Clamp Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars

Drag Specialties Handlebar Clamp - Finned - Black

Handlebar Clamp Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars

Drag Specialties Handlebar Clamp - Scalloped

Handlebar Clamp Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars

Drag Specialties Handlebar Clamp - Skirt - Black

Handlebar Clamp Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars

Drag Specialties Handlebar Clamp - Smooth - Black

Handlebar Clamp Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars

Drag Specialties Handlebar Clamp Screws with Spacers

Handlebar Clamp Screws with Spacers Spacers allow installation of clamp-mounted gauges on most clamps with recessed screws For '84+ models with 3-1/2" on-center risers and offset mounting holes Chrome finish

Drag Specialties Handlebar Riser Clamp - Two-Piece - Black

Handlebar Riser Clamp Chrome two-piece design clamps for 1" bars Fit most standard risers

Drag Specialties Hardware Kit - Forward Control

Hardware Kit Black zinc hardware kit for 1622-0487, 1622-0349, 1622-0350, & 1622-0489

Drag Specialties Heavy-Duty Vibration Mount - 1/4"-20 x 1/2" - 5-Pack

Heavy-duty Vibration Mount Rubber mount with steel studs Heavy-duty design has an internal spring for durability under high loads

Drag Specialties Left Swingarm Bearing/Race

Swingarm Bearings, Races, Bushings Bearings, bushings or races for various H-D models Made in the U.S.A.

Drag Specialties Magnetic Oil Drain Plug - 1/2" - 20

Magnetic Oil Drain Plug Features a heavy-duty, extra-strength magnet that collects more shavings than the OEM plug Includes O-ring

Drag Specialties Mirror Clamp - Miller's - Two-Piece - Black

Miller's Mirror Clamp For use when late-style H-D controls are not used or when mirror position is not functional 1" inside diameter fits most 1" handlebars, safety bars, frame tubes, etc. Versatile - can be used on either the right or left side...

Drag Specialties Oil Dipstick - Dyna

Oil Dipstick Billet machined aluminum with a chrome finish Features knurled edges to allow a good grip Plastic dipsticks have all required markings Includes sealing gaskets

Drag Specialties Oil Dipstick - Touring

Oil Dipstick Billet machined aluminum with a chrome finish Features knurled edges to allow a good grip Plastic dipsticks have all required markings Includes sealing gaskets

Drag Specialties Peaked Oil Tank Plug - Softail

Custom Oil Tank Plug Features a 2” billet aluminum cap with a peaked design Chrome finish with a knurled edge for easy removal 1.3” diameter rubber plug fits most 1.25” ID filler necks

Drag Specialties Petcock Adapter - EFI

Petcock Adapter Allows the use of a 22 mm petcock in a fuel tank designed for Delphi fuel injection Includes O-ring for a leak-proof seal Accepts any petcock that installs using a 22 mm nut

Drag Specialties Petcock Rebuild Kit

Petcock Rebuild Kit Kit includes one bronze screen, one stainless steel screen, one Viton® seal, one spring washer and one gasket Kit contains components for several different styles of petcock; all components may not be used in every style

Drag Specialties Petcock Rebuild Kit - 1/4" NPT

1/4" NPT Petcock Rebuild Kit Rebuild kit for 1/4" NPT petcock

Drag Specialties Replacement Fork Damper Tube Mount Washers - 14 mm

Fork Damper Tube Mount Washers Fork Washers Replacement washers available Sold in pairs