S&S Cycle

S&S Cycle #90-9502 - Top End Gasket - 3-5/8" Super Stock - EVO Big Twin

Top End Gasket Kit Includes set of head and base gaskets, exhaust gaskets and O-rings Layered steel head gaskets Made in the U.S.A. Kit does not include rocker box gaskets; must be purchased...

S&S Cycle #90-9500 - Top End Gasket Kit - 3.500" - Shovelhead

Gasket Kit Contains the best quality gaskets Made in the USA Top-end gasket kit do not include rocker box gaskets; must be purchased separately.

S&S Cycle #92-1411 - Piston Kit - For 113" Super Sidewinder® - 4.000" - +0.010"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #92-1400 - Piston Kit - For 100"/107" Super Sidewinder® - 4.000" - Standard

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #92-1401 - Piston Kit - For 100"/107" Super Sidewinder® - 4.000" - +0.010"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #92-1062 - Piston Kit - For 88"/93"/96" Super Stock® Heads - 3.625" - +0.020"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #92-1402 - Piston Kit - For 100"/107" Super Sidewinder® - 4.000" - +0.020"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #90-9504 - Top End Gasket Kit - 3-7/8" Super Stock - Twin Cam

Gasket Kit Contains the best quality gaskets Made in the USA Top-end gasket kit do not include rocker box gaskets; must be purchased separately.

S&S Cycle #92-1061 - Piston Kit - For 88"/93"/96" Super Stock® Heads - 3.625" - +0.010"

Piston Kit for S&S Motors Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A

S&S Cycle #90-9505 - Top End Gasket Kit - 4" Super Stock - Twin Cam

Gasket Kit Contains the best quality gaskets Made in the USA Top-end gasket kit do not include rocker box gaskets; must be purchased separately.

S&S Cycle #90-9503 - Top End Gasket Kit - 4" Super Stock - EVO Big Twin

Gasket Kit Contains the best quality gaskets Made in the USA Top-end gasket kit do not include rocker box gaskets; must be purchased separately.

S&S Cycle #50-8151 - Thread Reducer - 1/2"-13 to 5/16"-18

Thread Reducer Used on '93-'99 Harley-Davidson cylinder heads when installing a carburetor support bracket that requires 5/16"-18 mounting bolts Reduces a 1/2"-13 threaded hole to 5/16"-18 Made in...

S&S Cycle #56-1027 - Trap Door

Transmission Case Trap Door Kit Billet construction Kit includes bearings and hardware Made in the U.S.A.

S&S Cycle #55-1051 - Crank Position Sensor

Intelligent Spark Technology (IST) Ignition System Sensor The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an...

S&S Cycle #55-1037 - Map Sensor

Intelligent Spark Technology (IST) Ignition System Sensor The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an...

S&S Cycle #55-1014 - Cylinder Head Temp Sensor - Harley Davidson

Intelligent Spark Technology (IST) Ignition System Sensor The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an...

S&S Cycle #53-0040 - Rocker Cover Wrench Set

Rocker Box Wrench Set Four wrenches of different lengths for those hard-to-get-to rocker box screws For use on all Big Twin and XL Evolution-style motors Made in the U.S.A.

S&S Cycle #510-0684 - Exhaust Dealer Service Kit

Exhaust Dealer Service Kit Everything needed to perform a required exhaust system service or end cap replacement Kit includes tamper-proof screws and S&S proprietary tamper-proof screw bit

S&S Cycle #530-0068 - Stand - Engine - M8

Engine Stand Professional appearance suitable for display, and protects stands from corrosion and minor abrasions An economical way to hold an engine on the work bench, for shipping, or for display...

S&S Cycle #530-0006 - Transmission Drilling Fixture

Transmission Drilling Fixture Drilling fixture used to locate holes for drilling and tapping of transmission case on touring models when installing a T-Series engine with oil line adapter kit...

S&S Cycle #530-0014 - Tappet Alignment Tool

Tappet Block/Oil Pump Alignment Tool Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is removed (or even just loosened) it should be reinstalled...

S&S Cycle #53-0143 - Stand - Engine - Twin Cam A Engine

Engine Stand Professional appearance suitable for display, and protects stands from corrosion and minor abrasions An economical way to hold an engine on the work bench, for shipping, or for display...

S&S Cycle #53-0145 - Stand - Engine - Twin Cam B Engine

Engine Stand Professional appearance suitable for display, and protects stands from corrosion and minor abrasions An economical way to hold an engine on the work bench, for shipping, or for display...

S&S Cycle #53-0141 - Stand - Engine - Big Twin

Engine Stand Professional appearance suitable for display, and protects stands from corrosion and minor abrasions An economical way to hold an engine on the work bench, for shipping, or for display...