S&S Cycle

S&S Cycle #33-2027 - Pinion Shaft - Big Twin

Pinion Shaft Assembly For use with standard bearing diameter Made in the U.S.A.

S&S Cycle #34-2503 - Crankpin - XL

Crankpin Assembly Include crankpin, nuts and key Made in the U.S.A.

S&S Cycle #310-0367A - Engine Case - 3.750" Bore w/Stock Stud Pattern - Wrinkle Black - Twin Cam

Engine Case Replacement Twin Cam "A" engine cases for stock H-D chassis only (carb and EFI) Features greater overall strength than stock crankcases Strong, dependable Timken®-style sprocket shaft...

S&S Cycle #31-0172A - Engine Case - 3.750" Bore w/Stock Stud Pattern - 88A Engine Type - Wrinkle Black -Twin Cam

Engine Case Replacement Twin Cam "A" engine cases for stock H-D chassis only (carb and EFI) Features greater overall strength than stock crankcases Strong, dependable Timken®-style sprocket shaft...

S&S Cycle #310-0742 - Breather Valve - Twin Cam

Crankcase Breather Valve Solves the problem of oil carryover in Twin Cam "A" motors with stock oil pump Oil carryover is oil that comes out of your breather and all over your bike Easy-to-install...

S&S Cycle #31-0181A - Engine Case - 4.125" Bore w/Stock Stud Pattern - 88A Engine Type - Wrinkle Black - Twin Cam

Engine Case Replacement Twin Cam "A" engine cases for stock H-D chassis only (carb and EFI) Features greater overall strength than stock crankcases Strong, dependable Timken®-style sprocket shaft...

S&S Cycle #31-0047 - Engine Case - +4.000" Bore - Special Application - Evolution Big Twin

Special Application Crankcase Designed for high performance engines with cylinder bores 4.000", 4.125" and 4.375". Cam chest is moved outward 0.250" to allow crankcases to handle large cylinder...

S&S Cycle #31-0008 - Engine Case - Super Stock® Generator - Big Twin

Super Stock® Generator Engine Case Include crankcase bolts, washers and nuts, cylinder mounting studs, timing hole plug, magnetic drain plug, assorted breather and oil line fittings, top end oil...

S&S Cycle #50-8335 - Magnetic Oil Drain Plug

Magnetic Oil Drain Plug Used on S&S crankcases manufactured after 05/01/2000 Made in the USA

S&S Cycle #34-2104 - Nut - Crankpin - Black

Crankpin Nut For S&S Flywheels Designed to fit L'81-'99 S&S® flywheels Made in the U.S.A.

S&S Cycle #31-0052 - Engine Case - Super Stock® - 3.500" - Evolution Big Twin

Super Stock® Alternator Style Engine Case 3.5" stock bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that...

S&S Cycle #92-1210 - Piston Kit - for 106" Stroker Kit - Standard

Piston Kit - for S&S Motor Required for S&S 106" stock bore stroker kit with 4-1/2" stroke flywheels Compatible with stock or S&S Super Stock® cylinder heads Piston kit includes forged pistons,...

S&S Cycle #310-0369 - Engine Case - 4.125" Bore w/Stock Stud Pattern - Wrinkle Black - Twin Cam

Engine Case Replacement Twin Cam "A" engine cases for stock H-D chassis only (carb and EFI) Features greater overall strength than stock crankcases Strong, dependable Timken®-style sprocket shaft...

S&S Cycle #31-0055 - Engine Case - Super Stock® - 3.500" - Evolution Big Twin

Super Stock® Alternator Style Engine Case 3.5" stock bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that...

S&S Cycle #94-9254 - Wrist Pin Circlips - Harley Davidson

Wrist Pin Circlips For use with S&S Cycle wrist pins Sold in pack of 4

S&S Cycle #31-2100 - REED VALVE, 84-99 +.030

Crankcase Breather Reed Valve New-style breather is not dependent on the rotation of the crankshaft to make it open and close. Instead, reeds open when pressure in the crankcase becomes greater than...

S&S Cycle #31-0078 - Engine Case - Super Stock® Big Bore - 3.625" - Evolution Big Twin

Super Stock® Big Bore Engine Case 3.625" big bore cylinder case for any stroke up to and including 5" and most stock length connecting rods Machined to accept an oil filter assembly that mounts on...

S&S Cycle #31-2096 - REED VALVE, 93-99 STD

Crankcase Breather Reed Valve New-style breather is not dependent on the rotation of the crankshaft to make it open and close. Instead, reeds open when pressure in the crankcase becomes greater than...

S&S Cycle #940-0060 - Ring Set

Ring Set Complete set of piston rings Made in the U.S.A.

S&S Cycle #940-0014 - Replacement Piston Rings - 4.125" - Standard

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #940-0012 - Replacement Piston Rings - 4.125" - +0.010"

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #940-0013 - Replacement Piston Rings - 4.125" - +0.020"

Replacement Ring Set for S&S Pistons Replacement ring sets for S&S pistons only Rings come as sets for two pistons Made in the USA

S&S Cycle #94-1226X - Replacement Piston Rings - 3.625" - +.060

Replacement Ring Set for S&S Pistons Replacement rings sets for S&S pistons only Rings come as a set for two pistons Made in the U.S.A.

S&S Cycle #94-1222X - Replacement Piston Rings - 3.625" - +.020

Replacement Ring Set for S&S Pistons Replacement rings sets for S&S pistons only Rings come as a set for two pistons Made in the U.S.A.