Cables/Lines & Fittings

Drag Specialties Brake Line - Rear - Black - +3" - Softail '04-'06

Extended Length Black Vinyl Brake Line Kit Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Brake Line - Rear - Black - +3" ABS

Extended Length Black Vinyl Brake Line Kit Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Brake Line - Rear - Black - +3" Non ABS

Extended Length Black Vinyl Brake Line Kit Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Brake Line - Rear - Master Cylinder to ABS - Black

Rear Brake Line Sold as each Made in the U.S.A.

Drag Specialties Brake Line - Rear - Master Cylinder to ABS - Stainless Steel

Rear Brake Line Sold as each Made in the U.S.A.

Drag Specialties Brake Line - Rear - Non-ABS - Black

Rear Brake Line Sold as each Made in the U.S.A.

Drag Specialties Brake Line - Rear - Non-ABS - Stainless Steel

Rear Brake Line Sold as each Made in the U.S.A.

Drag Specialties Brake Line - Rear - Stainless Steel

Stainless Steel Brake Line Kit Features braided lines with chrome steel fittings Made in the U.S.A.

Drag Specialties Brake Line Fitting - 1/8" NPT - 90°

Brake Line Fitting Fittings for Drag Specialties universal brake lines For off-road and show use only; not DOT compliant Fittings made from steel, not brass Made in the U.S.A. 04-16 XL models use metric 10mm x 1.25" and 12mm x 1.50" banjo bolts,...

Drag Specialties Brake Line Fitting - 1/8" NPT - Straight

Brake Line Fitting Fittings for Drag Specialties universal brake lines For off-road and show use only; not DOT compliant Fittings made from steel, not brass Made in the U.S.A. 04-16 XL models use metric 10mm x 1.25" and 12mm x 1.50" banjo bolts,...

Drag Specialties Brake Line Fitting - 3/8-24 - Straight

Brake Line Fitting Fittings for Drag Specialties universal brake lines For off-road and show use only; not DOT compliant Fittings made from steel, not brass Made in the U.S.A. 04-16 XL models use metric 10mm x 1.25" and 12mm x 1.50" banjo bolts,...

Drag Specialties Brake Line Fitting - 7/16-24 - Straight

Brake Line Fitting Fittings for Drag Specialties universal brake lines For off-road and show use only; not DOT compliant Fittings made from steel, not brass Made in the U.S.A. 04-16 XL models use metric 10mm x 1.25" and 12mm x 1.50" banjo bolts,...

Drag Specialties Brake Line Fitting - AN #3 Adapter

Brake Line Fitting Fittings for Drag Specialties universal brake lines For off-road and show use only; not DOT compliant Fittings made from steel, not brass Made in the U.S.A. 04-16 XL models use metric 10mm x 1.25" and 12mm x 1.50" banjo bolts,...

Drag Specialties Brake Tee - 1/8" NPT - X3

Brake Line Tee Tees are 1/2" thick with 5/16" mounting hole For use with #3 size hose and fittings

Drag Specialties Cable Adjuster Cover - Clutch - Black

Clutch Cable Adjuster Cover Replaces the rubber boot found on most clutch cables Two-piece design is easy to install or remove when clutch needs adjusting

Drag Specialties Cable Guide Bracket - Clutch

Cable, Hose Guide/Tie-Down Bracket A chromed steel cable guide for routing clutch or speedometer cables Can also be used for gas line routing or as a bungee cord tie-down bracket Sold to dealer in packs of 10; sold to consumer as each

Drag Specialties Clutch Line - '13-'16 CVO, '14-'16 FLH

Stainless Steel Hydraulic Clutch Line Features chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Clutch Line - '15-'16 FLTRX/S

Stainless Steel Hydraulic Clutch Line Features chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Clutch Line - '17-'20 FLH

Stainless Steel Hydraulic Clutch Line Features chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Clutch Line - '17-'20 FLTRX

Stainless Steel Hydraulic Clutch Line Features chrome steel fittings Made in the U.S.A. All measurements are approximate.

Drag Specialties Crush Washer - 10 mm

Aluminum Crush Washers Universal crush washers provide consistent, reliable performance Made in the U.S.A.

Drag Specialties Crush Washer - 12 mm

Aluminum Crush Washers Universal crush washers provide consistent, reliable performance Made in the U.S.A.

Drag Specialties Hydraulic Hose Adapter

Hydraulic Clutch Hose Adapter CNC-precision-machined steel Screws into V-Rod and Big Twin OEM-style hydraulic clutch actuator Enables any AN-3 brake line to be used as a hydraulic clutch line Made in the U.S.A. Not for use on '13-'16 CVO and '14-'16...

Drag Specialties Idle Cable - 24-1/2" - Vinyl

Black Vinyl Cable Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation and long life Length given is the length of the outer housing only, excluding the elbow. ...