Electrical

Namz Delphi ECM 36 Pin Connector Kit (#NHD-72078-00)

OEM-Type Connector — Connector Kit Made in the U.S.A.

Namz Delphi Engine Temp Connector (#ND-12162193-B)

OEM-Type Connector — Engine Temperature Connector Made in the U.S.A.

Namz Delphi Ignition Coil Connector (#ND-12162191-B)

OEM-Type Connector — Wiring Connector Made in the U.S.A.

Namz Delphi Mating Connectors (#PT-410016)

Wiring Harness with Pigtail Connectors with 18” wire pigtails Wiring matches Harley-Davidson OEM colors for easy installation Made in the U.S.A.

Namz Delphi Mating Connectors (#PT-410017)

Wiring Harness with Pigtail Connectors with 18” wire pigtails Wiring matches Harley-Davidson OEM colors for easy installation Made in the U.S.A.

Namz Delphi OEM “B+” Female Connector (#ND-FBP)

OEM-Type Connector — Wiring Connector Pack Made in the U.S.A.

Namz Delphi OEM “B+” Male Connector (#ND-MBP)

OEM-Type Connector — Wiring Connector Pack Made in the U.S.A.

Namz Delphi Oil Pressure Switch Connector (#ND-12065298)

OEM-Type Connector — Wiring Connector Made in the U.S.A.

Namz Delphi Throttle Control Connector (#ND-15397577)

OEM-Type Connector — Cable Connector Made in the U.S.A.

Namz Delphi Throttle Position Sensor Connector (#ND-12162182-B)

OEM-Type Connector — TPS Connector Made in the U.S.A.

Namz Delphi Tour Pack Light Bar Connector (#ND-12077591)

OEM-Type Connector — Cable Connector Made in the U.S.A.

Namz Delphi/AMP Builders Kit (#NDP-ABK)

Delphi/AMP Connector Kit and Refills — Connector Kit Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Deutsch Fuel Pump Header Connector (#DTFPH-01)

OEM-Type Connector — Wiring Connector Made in the U.S.A.

Namz EFI - Harness (#NHD-70233-02)

Complete EFI Wiring Harness Replacement EFI harness is identical to the OE obsolete version and is 100% plug-n-play

Namz Extension Harness - ABS (#N-FAXH-12)

Front ABS Extension Harness Plug-n-Play 12" extension

Namz Fan Override Switch - Polaris (#OR-P-FOR-RN)

Fan Override Harness Kit with Rocker Switch Allows you to keep electric coolant fan on after the factory thermostat has shut it off Uses weather pack connectors and weather pack sealed relay mount Sealed rocker switch with red LED Diode protection...

Namz Fan Override Switch - Polaris (#OR-P-FOR-RT)

Fan Override Harness Kit with Rocker Switch Allows you to keep electric coolant fan on after the factory thermostat has shut it off Uses weather pack connectors and weather pack sealed relay mount Sealed rocker switch with red LED Diode protection...

Namz Front Turn Signal Extension - +12" (#NTSX-CB12)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - +15" (#NTSX-CB15)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - +4" (#NTSX-CB04)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - +8" (#NTSX-CB08)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - 36" (#NTSX-3601)

Front Turn Signal Extension 36" extensions allow relocation of handlebar switch-mounted turn signals on models with CAN Bus electrical systems After cutting and disconnecting the wires at the switch housings, extensions are soldered in; OEM-style plugs...

Namz Front Turn Signal Relocation Harness - 36" (#NTSX-3602)

Front Turn Signal Relocation Harness 36" extensions allow relocation of handlebar switch-mounted turn signals on models with CAN Bus electrical systems After cutting and disconnecting the wires at the switch housings, extensions are soldered in;...

Namz Fuel Injector Connector - Harley Davidson (#ND-15497399)

Fuel Injector Connector Kit Kit includes wire seals, terminals and secondary lock