Electrical

Namz Delphi Throttle Control Connector (#ND-15397577)

OEM-Type Connector — Cable Connector Made in the U.S.A.

Namz Delphi Throttle Position Sensor Connector (#ND-12162182-B)

OEM-Type Connector — TPS Connector Made in the U.S.A.

Namz Delphi Tour Pack Light Bar Connector (#ND-12077591)

OEM-Type Connector — Cable Connector Made in the U.S.A.

Namz Delphi/AMP Builders Kit (#NDP-ABK)

Delphi/AMP Connector Kit and Refills — Connector Kit Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Deutsch Fuel Pump Header Connector (#DTFPH-01)

OEM-Type Connector — Wiring Connector Made in the U.S.A.

Namz EFI - Harness (#NHD-70233-02)

Complete EFI Wiring Harness Replacement EFI harness is identical to the OE obsolete version and is 100% plug-n-play

Namz Extension Harness - ABS (#N-FAXH-12)

Front ABS Extension Harness Plug-n-Play 12" extension

Namz Fan Override Switch - Polaris (#OR-P-FOR-RN)

Fan Override Harness Kit with Rocker Switch Allows you to keep electric coolant fan on after the factory thermostat has shut it off Uses weather pack connectors and weather pack sealed relay mount Sealed rocker switch with red LED Diode protection...

Namz Fan Override Switch - Polaris (#OR-P-FOR-RT)

Fan Override Harness Kit with Rocker Switch Allows you to keep electric coolant fan on after the factory thermostat has shut it off Uses weather pack connectors and weather pack sealed relay mount Sealed rocker switch with red LED Diode protection...

Namz Front Turn Signal Extension - +12" (#NTSX-CB12)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - +15" (#NTSX-CB15)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - +4" (#NTSX-CB04)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - +8" (#NTSX-CB08)

Front Turn Signal Extension A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.

Namz Front Turn Signal Extension - 36" (#NTSX-3601)

Front Turn Signal Extension 36" extensions allow relocation of handlebar switch-mounted turn signals on models with CAN Bus electrical systems After cutting and disconnecting the wires at the switch housings, extensions are soldered in; OEM-style plugs...

Namz Front Turn Signal Relocation Harness - 36" (#NTSX-3602)

Front Turn Signal Relocation Harness 36" extensions allow relocation of handlebar switch-mounted turn signals on models with CAN Bus electrical systems After cutting and disconnecting the wires at the switch housings, extensions are soldered in;...

Namz Fuel Injector Connector - Harley Davidson (#ND-15497399)

Fuel Injector Connector Kit Kit includes wire seals, terminals and secondary lock

Namz Fuel Injector Connector - Rear - Harley Davidson (#PT-15497399)

Rear Fuel Injector Connector Pigtail Each pigtail comes with color matching 15" wire crimped and installed Wires are stripped with slug left on and comes with 3/16" heat shrink

Namz Handlebar Extension Harness - Harley Davidson (#NHCX-CB14)

Handlebar Extension Harness 100% “Plug-n-Play” harness replaces the stock harness, allowing installation of up to 18” tall handlebars The simplest and easiest harness to fish through your handlebars Designed to work with new smaller sized 4-position...

Namz Handlebar Extension Harness - Harley Davidson (#NHCX-RK18)

Handlebar Extension Harness 100% “Plug-n-Play” harness replaces the stock harness, allowing installation of up to 18” tall handlebars The simplest and easiest harness to fish through your handlebars Designed to work with new smaller sized 4-position...

Namz Handlebar Switch - Wire - Extensions (#NHCX-UMB)

Universal Handlebar Switch Wire Extension Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine...

Namz Handlebar Switch - Wire - Extensions (#NHCX-UMN)

Universal Handlebar Switch Wire Extension Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine...

Namz Handlebar Wiring Extension - 12" - '07-'13 FL (#NHCX-MB12)

Ready-To-Install Handlebar Wire Extension Kit All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes wire heat shrink and...

Namz Handlebar Wiring Extension - 12" - '07-'13 H-D (#NHCX-M12)

Ready-To-Install Handlebar Wire Extension Kit All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes wire heat shrink and...

Namz Handlebar Wiring Extension - 12" - CAN Bus (#NHCX-J12)

Ready-To-Install Handlebar Wire Extension Kit All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes wire heat shrink and...