Electrical

Namz Radio Connector 35 Position - Female - Harley Davidson (#NA-776164-1)

OEM-Type HD Radio Connector — Wiring Connector The hard-to-find radio connectors for all models 98-13 Made in the U.S.A.

Namz Radio/BCM Connector Kit - Harley Davidson (#NHD-69200193)

48-Way Socket Connector This connector will work at both locations, the BCM and OEM radio on ALL Harley Davidson CAN/Bus models The OEM part number for the BCM connector is different than the radio due to a slight difference that we were able to avoid...

Namz Rear Fender Harness (#N-RBTH-01)

Rear Fender Lighting Harness Allows plug-n-play installation of additional lighting to the rear of the motorcycle without cutting or splicing the factory wiring Plug and play

Namz Rear Fender Harness (#N-RBTH-02)

Rear Fender Lighting Harness Allows plug-n-play installation of additional lighting to the rear of the motorcycle without cutting or splicing the factory wiring Plug and play

Namz Rear Fender Harness - Lighting (#N-RBTH-03)

Lighting Harness Features all of the wire, heat shrink and Lightning Splice's needed to make adding on additional LED lighting simple Ground, running light, brake light and turn signal wiring for a left and right side light included

Namz Rear Fender Loom - 18" (#NRFH-LOOM)

Rear Fender Foam Loom Replacement rear fender foam loom with adhesive tape, cut to 18" long This kit will replace the OEM loom for (2) motorcycles

Namz Rear Speaker Harness (#NAP-SRRS-01)

Rear Speaker Harness Made in the U.S.A. Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Namz Rear Speaker Harness (#NHD-70160-06)

Rear Speaker Harness Made in the U.S.A. Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Namz Rear Speaker Harness (#NHD-70160-11)

Rear Speaker Harness Made in the U.S.A. Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Namz Regulator Connector Kit - XL (#HDD-XL-KIT)

Deutsch Plug And Receptacle Kit Used to replace the male and female connectors that are found on the regulator Designed to save time and labor Kit includes 1-position plug, receptacle and one male and one female crimp terminal

Namz Removal Tool - Mate-n-Lock/Wire Terminal - For Female Terminals (#NMLRT-01)

Mate-n-Lock Terminal Removal Tool - Female Terminals When servicing AMP Mate-n-Lock connectors, this tool allows you to remove female terminals from the connector

Namz Removal Tool - Mate-n-Lock/Wire Terminal - For Male Terminals (#NMLRT-02)

Mate-n-Lock Terminal Removal Tool - Male Terminals Plunger tool allows you to remove male terminals from a Mate-n-Lock connector Just slide over the terminal and push the lever

Namz Replacement AMP Connectors - Harley Davidson (#2120-0210)

Delphi/AMP Connector Kit and Refills — Wiring Connector Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Replacement Delphi Connectors - Harley Davidson (#2120-0212)

Delphi/AMP Connector Kit and Refills — Wiring Connector Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Replacement Delphi Connectors - Harley Davidson (#2120-0214)

Delphi/AMP Connector Kit and Refills — Wiring Connector Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Replacement Delphi Connectors - Harley Davidson (#2120-0215)

Delphi/AMP Connector Kit and Refills — Wiring Connector Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Replacement Delphi Connectors - Harley Davidson (#2120-0216)

Delphi/AMP Connector Kit and Refills — Wiring Connector Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Replacement Delphi Connectors - Harley Davidson (#NHD-72485-07)

Delphi/AMP Connector Kit and Refills — Connector Kit Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.

Namz Replacement Electrical Connection - CAN Bus (#NHD-72673-11)

Replacement CAN Bus Connection OEM replacement electrical power connection For navigation, audio, tachometers, oil pressure gauges and heated grips

Namz Replacement Rear Fender Harness (#NRFH-02)

Replacement Rear Fender Harness Simple to install Matching OEM color-coded wiring harness Made in USA

Namz Replacement Rear Fender Harness (#NRFH-03)

Replacement Rear Fender Harness Simple to install Matching OEM color-coded wiring harness Made in USA

Namz Shur Crimp Terminal - #5 Double Female - 50 Pack (#NH-607202)

Replacement Terminals Can be used for custom applications

Namz Shur Crimp Terminal - #5 Female - 50 Pack (#NH-606252)

Replacement Terminals Can be used for custom applications

Namz Shur Crimp Terminal - #5 Male - 50 Pack (#NH-606302)

Replacement Terminals Can be used for custom applications