Electrical

Namz MT Series Wire Seals - 50 Pack (#NS-7160-9785)

Replacement Connector Component — Wiring Connector Seal Can be used in custom applications Manufacturer's color of connector may vary

Namz MT/HM Series Terminal - Female - 50 Pack (#NS-1500-0106)

Replacement Terminals Can be used for custom applications

Namz MT/HM Series Terminal - Male - 50 Pack (#NS-1500-0105)

Replacement Terminals Can be used for custom applications

Namz O2 Sensor Harness Extension - 18 mm to 12 mm (#NO2X-1202)

O2 Sensor Harness Extension Allows the use of exhaust systems with 18 mm O2 sensor bungs to be used with late model bikes with 12 mm O2 sensors Reduces the 18 mm O2 bungs to 12 mm O2 bungs found on select '10-'15 models Wiring harness comes...

Namz O2 Sensor Harness Extension and Bung Adapter - 18 mm to 12 mm (#NO2X-1201)

O2 Sensor Harness Extension and Bung Adapter Now you can use '09 Dresser exhaust pipes on '10-'16 Dresser models Reduces the 18 mm O2 bungs on '09 models to 12 mm O2 bungs Uses Namz simple Plug-N-Play wiring harness technology; no cutting or splicing...

Namz OEM Speedo & Tri Bar Connector Kit (#NHD-72130-04)

OEM-Type Connector — Cable Connector Made in the U.S.A.

Namz Oxygen Enrichment Devices (#NR-FL-XIED-09)

Oxygen Enrichment Device Install in a few minutes; simply plug in between the oxygen sensors and the OEM wiring harness Recommended for models with high-flow air intakes and exhausts Reduce your engine's temperature 20 to 30 degrees Made in the USA

Namz Oxygen Enrichment Devices (#NR-O2-IED)

Oxygen Enrichment Device Install in a few minutes; simply plug in between the oxygen sensors and the OEM wiring harness Recommended for models with high-flow air intakes and exhausts Reduce your engine's temperature 20 to 30 degrees Made in the USA

Namz Oxygen Enrichment Devices (#NR-XIED)

Oxygen Enrichment Device Install in a few minutes; simply plug in between the oxygen sensors and the OEM wiring harness Recommended for models with high-flow air intakes and exhausts Reduce your engine's temperature 20 to 30 degrees Made in the USA

Namz Pick Tool - Mini - Universal (#NMPT-01)

Universal Mini Pick Tool For removing JAE, JST and other miscellaneous "mini" terminals

Namz Pigtail Connector - Fuel Induction Module/Throttle Body (#PT-33471-0601)

Fuel Induction Module/Throttle Body Pigtail Each pigtail comes with color matching 15" long wire crimped and installed Wires are stripped with slug left on and comes with 3/16" heat shrink

Namz Power Connection - Harley Davidson (#NHD-69201599A)

Replacement Electrical Power Connection OEM replacement electrical power connection for navigation, audio, heated grips or charging port Supplies ground, switched and 12+ battery power without CAN/Bus interference

Namz Power Tap Pigtails - Polaris (#OR-P-PT-R)

Power Tap Pigtails Connect directly to the vehicle allowing users to add additional lighting or any electrical items without CAN/Bus interference Made in the U.S.A

Namz Powerport with Cover - CAN Bus (#NOB-PPCB)

On Board Power Port Plugs into on-board diagnostic port 100% plug-n-play Acts like a cigarette lighter port in your automobile; works great for powering and charging accessories while riding Made in the U.S.A.

Namz Quick Disconnect Wiring Harness - Harley Davidson (#NTP-CB01)

Tour-Pak® Quick Disconnect Wiring Harness Add power to your Tour-Pak® with quick-disconnect convenience Plugs into rear fender harness and connects into your Tour-Pak® Connector is exposed behind seat for easy removal Made in the U.S.A.

Namz Quick Disconnect Wiring Harness - Harley Davidson (#NTP-H02)

Tour-Pak® Quick Disconnect Wiring Harness Universal plug and play Tour-Pak power tap harness Easy Removal

Namz Quick Disconnect Wiring Harness - Harley Davidson (#NTP-H03)

Tour-Pak® Quick Disconnect Wiring Harness Add power to your Tour-Pak® with quick-disconnect convenience Plugs into rear fender harness and connects into your Tour-Pak® Connector is exposed behind seat for easy removal Made in the U.S.A.

Namz Radio Connector 35 Position - Female - Harley Davidson (#NA-776164-1)

OEM-Type HD Radio Connector — Wiring Connector The hard-to-find radio connectors for all models 98-13 Made in the U.S.A.

Namz Radio/BCM Connector Kit - Harley Davidson (#NHD-69200193)

48-Way Socket Connector This connector will work at both locations, the BCM and OEM radio on ALL Harley Davidson CAN/Bus models The OEM part number for the BCM connector is different than the radio due to a slight difference that we were able to avoid...

Namz Rear Fender Harness (#N-RBTH-01)

Rear Fender Lighting Harness Allows plug-n-play installation of additional lighting to the rear of the motorcycle without cutting or splicing the factory wiring Plug and play

Namz Rear Fender Harness (#N-RBTH-02)

Rear Fender Lighting Harness Allows plug-n-play installation of additional lighting to the rear of the motorcycle without cutting or splicing the factory wiring Plug and play

Namz Rear Fender Harness - Lighting (#N-RBTH-03)

Lighting Harness Features all of the wire, heat shrink and Lightning Splice's needed to make adding on additional LED lighting simple Ground, running light, brake light and turn signal wiring for a left and right side light included

Namz Rear Fender Loom - 18" (#NRFH-LOOM)

Rear Fender Foam Loom Replacement rear fender foam loom with adhesive tape, cut to 18" long This kit will replace the OEM loom for (2) motorcycles

Namz Rear Speaker Harness (#NAP-SRRS-01)

Rear Speaker Harness Made in the U.S.A. Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.