Trask

Trask #TM-2012BL - Power Plate Kit - High Pressure Plate Spring Kit - Blue - M8/CVO

For models that use a slipper/assist clutch.FeaturesDesigned for high output M8 enginesRace engineered & race track provenEliminates clutch slippageCost effective solution when upgrading the clutchLooks amazing when paired with Trask Derby...

Trask #TM-2012R - Power Plate Kit - High Pressure Plate Spring Kit - Raw - M8/CVO

Power Plate Kit - High Pressure Plate Spring Kit - Raw - M8/CVOFeaturesDesigned for high output M8 enginesRace engineered & race track provenEliminates clutch slippageCost effective solution when upgrading the clutchLooks amazing when paired with...

Trask #TM-2012RD - Power Plate Kit - High Pressure Plate Spring Kit - Red - M8/CVO

Power Plate Kit - High Pressure Plate Spring Kit - Red - M8/CVOFeaturesDesigned for high output M8 enginesRace engineered & race track provenEliminates clutch slippageCost effective solution when upgrading the clutchLooks amazing when paired with...

Trask #TM-2250 - Shifter Linkage - 12.0"

Shifter Linkage - 12.0"FeaturesCarbon-fiber race-inspired look that weighs half the weight of the stock linkageConstructed with lightweight titanium and Teflon-coated heim joints for longer lifeAids in smoother shifts and makes it easier to select...

Trask #TM-2901-6 - Front Sprocket - Cush Drive - 25 Tooth - Touring/Trike

For '09-'23 Harley-Davidson FL Touring models with Trask Cush Drive Conversion Kit.FeaturesHeat treated for durabilityPrecision machined steel drive sprocketAllows the option to replace the 25 tooth drive sprocketMade in the USASpecsProduct...

Trask #TM-3016 - Fairing Support - Black - FLTR

Fairing Support - Black - FLTRFeaturesMild steel with a black powder-coated finishEliminates the need for factory engine guard to give the bike a nice clean lookMounts between the inner and outer fairingsIncludes amp mounts for aftermarket stereo...

Trask #TM-3220 - Swing Arm - Assault

Swing Arm - AssaultFeaturesPrecision machined from Billet T6061 AluminumRace inspired design to increase rigidity while reducing weightPocketed joints are engineered for maximum strength by eliminating the need for welding100% bolt on factory replacement...

Trask #TM-3220-15 - Caliper Mount - M8 ST '18-'25

Caliper Mount - M8 ST '18-'25FeaturesAllows for installation of radial caliper to the rear of a performance Bagger/SoftailPrevents clutch slippage resulting from motor upgradesMachined out of 6061 aluminiumAvailable in raw finishMade in the U.S.A.Does...

Trask #TM-3610BK - Assault Series Engine Guard - Gloss Black

Does not fit '23 FLHXSE or FLTRXSE.FeaturesProvides cosmetic vehicle protection from low-speed tip-oversAssault Series engine guard by TraskDesigned to fit with Trask turbochargersUnique low-profile designKnurled and engraved replaceable Delrin slider...

Trask #TM-5021 - Assault 2:1 Exhaust - Full Stainless - '91-'05 Dyna

Comes with 18 mm wide band O2 bungs.FeaturesMade from high-quality stainless steel, mandrell bent, then TIG weldedIncludes custom heat shields with wire tied fasteners for race-inspired lookDouble slip fit and gusset for additional strengthO2 ports...

Trask #TM-5021BK - Assault 2:1 Exhaust - Black - '91-'05 Dyna

Assault 2:1 Exhaust - Black - '91-'05 DynaFeaturesMade from high-quality stainless steel, mandrell bent, then TIG weldedIncludes custom heat shields with wire tied fasteners for race-inspired lookDouble slip fit and gusset for additional strengthO2 ports...

Trask #TM-5030 - Assault 2:1 Exhaust - Full Stainless - '84-'00 FXR

Comes with 18 mm wide band O2 bungs.FeaturesMeticulously handmade from high-quality 16GA stainless steel, mandrel bent then gas purged and TIG weldedIncludes custom heat shields with wire tied fasteners for a race inspired lookDouble slip fit and gusset...

Trask #TM-5030BK - Assault 2:1 Exhaust - Black - '84-'00 FXR

Assault 2:1 Exhaust - Black - '84-'00 FXRFeaturesMeticulously handmade from high-quality 16GA stainless steel, mandrel bent then gas purged and TIG weldedIncludes custom heat shields with wire tied fasteners for a race inspired lookDouble slip fit and...

Trask #TM-5053 - 2-into-1 Assault Exhaust System - Natural - with Bags

Use with saddle bags.FeaturesMade from high-quality stainless steel, mandrel bent, then TIG-weldedIncluded custom heat shields with wire tied fasteners for a race-inspired lookDouble slip fit and gusset for additional strengthO2 ports includedMade in the...

Trask #TM-5053BK - 2-into-1 Assault Exhaust System - Black Ceramic - with Bags

Use with saddle bags.FeaturesMade from high-quality stainless steel, mandrel bent, then TIG-weldedIncluded custom heat shields with wire tied fasteners for a race-inspired lookDouble slip fit and gusset for additional strengthO2 ports includedMade in the...

Trask #TM-5130 - 2-into-1 Big Sexy Exhaust System - Natural

Recommended for 117" and larger M8 engines making 140+ horsepower.FeaturesThree-step header with a high-flow merge mufflerDouble-slip joints for heat expansion and exhaust seal qualityHigh-quality mandrel-bent stainless steel constructionCustom...

Trask #TM-5130BK - 2-into-1 Big Sexy Exhaust System - Black

Recommended for 117" and larger M8 engines making 140+ horsepower.FeaturesThree-step header with a high-flow merge mufflerDouble-slip joints for heat expansion and exhaust seal qualityHigh-quality mandrel-bent stainless steel constructionCustom...

Trask #TM-5130PO - 2-into-1 Big Sexy Exhaust System - Polished

Recommended for 117" and larger M8 engines making 140+ horsepower.FeaturesThree-step header with a high-flow merge mufflerDouble-slip joints for heat expansion and exhaust seal qualityHigh-quality mandrel-bent stainless steel constructionCustom...

Trask #TM-5131 - 2-into-1 Big Sexy Exhaust System - Natural

Recommended for use with 117" M8 engines and other engines that make 140+ horsepower.FeaturesThree-step header with a high-flow merge mufflerDouble-slip joints for heat expansion and exhaust seal qualityHigh-quality mandrel-bent stainless steel...

Trask #TM-5131BK - 2-into-1 Big Sexy Exhaust System - Black

Recommended for use with 117" M8 engines and other engines that make 140+ horsepower.FeaturesThree-step header with a high-flow merge mufflerDouble-slip joints for heat expansion and exhaust seal qualityHigh-quality mandrel-bent stainless steel...

Trask #TM-5300 - 2-into-1 Assault Exhaust System - Natural

2-into-1 Assault Exhaust System - NaturalFeaturesMade from high-quality stainless steel, mandrel bent, then TIG-weldedIncludes custom heat shields with wire tied fasteners for race-inspired lookDouble slip fit and gusset for additional strengthO2 ports...

Trask #TM-5300BK - 2-into-1 Assault Exhaust System - Black

2-into-1 Assault Exhaust System - BlackFeaturesMade from high-quality stainless steel, mandrel bent, then TIG-weldedIncludes custom heat shields with wire tied fasteners for race-inspired lookDouble slip fit and gusset for additional strengthO2 ports...

Trask #TM-5700BK - 2-into-1 Nasty Bastard Exhaust System - Black - '97-'16 FL

2-into-1 Nasty Bastard Exhaust System - Black - '97-'16 FLFeatures1-3/4" header pipes flow in a tapered 3" to 3-1/2" turnout megaphone37" L with 3-1/2" billet end capIncludes performance baffleMade in the U.S.A.O2 sensor port...

Trask #TM-5700CH - 2-into-1 Nasty Bastard Exhaust System - Chrome - '97-'16 FL

2-into-1 Nasty Bastard Exhaust System - Chrome - '97-'16 FLFeatures1-3/4" header pipes flow in a tapered 3" to 3-1/2" turnout megaphone37" L with 3-1/2" billet end capIncludes performance baffleMade in the U.S.A.O2 sensor port...