JIMS_PerformanceParts

Jims #2251 - Fork Tube and Leg Holder

Fork Tube and Leg HolderFeaturesMounts in vise to hold fork firmly during repair without causing damage to fork assemblyHolds fork legs and tubes for easy hands-free servicing or rebuildingUse on smaller 28 mm or larger fork tubes with a maximum 2”Will...

Jims #2260 - Sprocket Lock Tool - Big Twin

Sprocket Lock Tool - Big TwinFeaturesLock the transmission pulley for removing or installing pulley nutMade in the U.S.A.SpecsColor/FinishBlueProduct NamePulley LockApplicationTransmissionRiding StyleStreetUnitsEach

Jims #2384 - Shift Pawl Plate Assembly - Big Twin '85-'00

Shift Pawl Plate Assembly - Big Twin '85-'00FeaturesAssembly includes plate, spring, pawl plate, shifter shaft, spring, pin, washer and retaining ringReduces shifter free playMade in the U.S.A.SpecsApplicationShifter AssemblyColor/FinishSilverProduct...

Jims #38515-90 - Tool - Clutch Spring Compressor

Tool - Clutch Spring CompressorFeaturesUsed to release clutch spring so retainer ring can be easily removed and installedMade in the USASpecsColor/FinishBlueProduct NameToolUnitsEachRiding StyleStreetTypeClutch Spring Compressor

Jims #38515-91 - Nut - Clutch Spring Compressor

Nut - Clutch Spring CompressorFeaturesUsed to release clutch spring so retainer ring can be easily removed and installedMade in the USAFor '91-'03 XL applications, compressor nut Part# DS-197061 must be used in conjunction with compressor tool Part#...

Jims #5816 - Countershaft 1st Scissor Gear Alignment Tool - Cruise Drive

Countershaft 1st Scissor Gear Alignment Tool - Cruise DriveFeaturesEssential for installing countershaft 1st scissor gear in cruise drive transmissionsEnsures scissor gear teeth mesh correctly with the mainshaft 1st gearMaintains alignment of gear halves...

Jims #5821 - Fork Cap Installer - 49 mm

Fork Cap Installer - 49 mmFeaturesUsed to install fork tube caps without removing the fork legs from the bikeMade in the U.S.A.SpecsRiding StyleStreetApplicationFork CapColor/FinishSilverProduct NameTube InstallerUnitsEach

Jims #943 - Tool - Ignition Switch/Housing Alignment - '02-'13 Harley-Davidson

Tool - Ignition Switch/Housing Alignment - '02-'13 Harley-DavidsonFeaturesAlign ignition switch housing as retaining screws are being torquedAlso used to position switch in the correct orientation for properly activating the fork lockProper alignment of...

Jims #944 - Tool - Ignition Switch/Housing Alignment - '14-'17 Harley-Davidson

Tool - Ignition Switch/Housing Alignment - '14-'17 Harley-DavidsonFeaturesAlign ignition switch housing as retaining screws are being torquedAlso used to position switch in the correct orientation for properly activating the fork lockProper alignment of...