Cam Side Parts

BREATHER VALVE AND GEAR FOR BIG TWIN

Weight: 0.30Whether you're building an engine from scratch, rebuilding an engine that has been thrashed or updating from the OEM plastic breather, we recommend using one of these top quality steel breather valve and gearsThe stock plastic breathers are...

BREATHER VALVE AND GEAR FOR BIG TWIN

Weight: 0.37Whether you're building an engine from scratch, rebuilding an engine that has been thrashed or updating from the OEM plastic breather, we recommend using one of these top quality steel breather valve and gearsThe stock plastic breathers are...

BREATHER VALVE AND GEAR FOR BIG TWIN

Weight: 0.34Whether you're building an engine from scratch, rebuilding an engine that has been thrashed or updating from the OEM plastic breather, we recommend using one of these top quality steel breather valve and gearsThe stock plastic breathers are...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.07A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.07A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.07A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.06A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.06A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.06A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.06A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.06A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

BREATHER VALVE/GEAR SHIMS FOR BIG TWIN

Weight: 0.06A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195" I.D. and Late...

CAM CHAIN TENSIONER PAD FOR TWIN CAM

Weight: 0.02 Chain tensioner pads are an item overlooked, and when they fail, major issues can occur. These pads work on the inner and outer tenioners, and are made from a high performance polymide stanyl that surpasses the OEM material. Sold as a...

CAM CHAIN TENSIONER PAD INSTALLATION TOOL

Weight: 1.16 Installing the pad kit is simple when using our pad installation tool. The tool easily removes the old tensioner pin, and allows for the installation of new pad and pin. Installation ToolFor use with our 66011 Cam Chain Tensioner Pad...

CAM CHAIN TENSIONER SHOE FOR TWIN CAM

Weight: 0.01 Cam chain tensioner shoe is made from upgraded material. Works with OEM or aftermarket billet cam plates. Use two to complete factory tensioner replacement. Sold each. Cam Chain Tensioner ShoeFits Twin Cam 2007/Later with Hydraulic...

CAM COVER GASKET

Weight: 0.16CometicGear/Cam Cover GasketsFits Shovelhead 1970/1984 & Big Twin Evolution 1984/1992.060" AFM (aluminum foam material)Package of 5Replaces HD# 25225-70ABy: COMETIC GASKET

CAM DRIVE SPROCKET SPACER SET

Weight: 0.36Spacer Set includes 1 each of the following:.100" Thick - Replaces HD# 25729-06.110" Thick - Replaces HD# 25731-06.120" Thick - Replaces HD# 25734-06.130" Thick - Replaces HD# 25736-06.140" Thick - Replaces HD# 25737-06.150" Thick - Replaces...

CAM POSITION SENSOR COVER FOR TWIN CAM

Weight: 0.20Show quality Eagle Spirit black and chrome cam position sensor cover adds a great look to your Twin CamSee the general merchandise section for matching Eagle Spirit accessoriesV-FACTORBlack & Chrome Cam Position SensorFits Twin Cam 1999/Later

CAM/GEAR CASE NOSE CONE REBUILD KIT FOR BIG TWIN

Weight: 0.2560 Save time, money, and effort when you need to replace all of the normal wear components in your cam/gear cover (nose cone) with this complete Rebuild Kit. Kit Includes: 2 Bushing Pins (Replaces HD # 271) 1 Pinion Bushing (Replaces HD...

CAM/GEAR CASE PARTS FOR BIG TWIN

Weight: 0.13Cometic.060" AFM (Aluminum Foam Material) GasketFits Big Twin 1941/1969Replaces HD# 25225-36CSOLD EACHBy: COMETIC GASKET

CAM/GEAR CASE PARTS FOR BIG TWIN 1936/1969

Weight: 0.14JimsCircuit Breaker Drive Gear StudFits Big Twin 1936/1969Replaces HD# 25856-36By: JIMS MACHINING