Mounts

Ciro #50110 - Perch Mount - Chrome

Perch Mount - ChromeFeaturesKeep Ciro device holders, cup/drink holders, cameras and more close at handLeft or right control Perch Mount with vertical bolt spacing at 1-1/16" to 1-11/16" from center to centerCan be mounted with the ball end up...

Ciro #50116 - Fairing Mount - '97-'13 FLHT

Fairing Mount - '97-'13 FLHTFeaturesCompatible with all original and GEN 2 phone holdersVery strong forged aluminum with durable powder coatingHandy for use with mobile based GPSQuick and easy install, no need to remove the outer fairingCan be used to...

Ciro #50117 - Fairing Mount - '14-'20 FLHT

Fairing Mount - '14-'20 FLHTFeaturesCompatible with all original and GEN 2 phone holdersVery strong forged aluminum with durable powder coatingHandy for use with mobile based GPSQuick and easy install, no need to remove the outer fairingCan be used to...

Ciro #50118 - Universal 1/4"-20 Mount Bolt

Universal 1/4"-20 Mount BoltFeaturesThe Ciro Universal mount allows to you put any Ciro ball mounted accessory wherever you wantWorks with original and GEN 2 ball mount systemsSpecsRiding StyleATVUnitsEachMounting...

Ciro #50120 - Mirror Mount

Mirror MountFeaturesCan be used as an alternative for bikes that are incompatible with perch mountingWorks with all Ciro Ball mount accessoriesCompatible with all original and GEN 2 ball mount accessoriesCan be mounted with the ball mount facing forward...

Ciro #50126 - 7/8"-2-1/4" Universal Mount - Black

7/8"-2-1/4" Universal Mount - BlackFeaturesUniversal fit, works with any tube from 7/8"-2-1/4"Allows to you put any Ciro ball mounted accessory wherever you wantKit includes stainless steel ball mount, strap, and adapters for...

Ciro #50127 - GoPro Mount with 1/4"-20 Bolt

GoPro Mount with 1/4"-20 BoltFeaturesStud mount fits anywhere there is a 1/4" holeHolds your camera secure while still allowing great adjustment1/4-20 threaded studs and mounting hardware includedSpecsRiding StyleStreetProduct NameAccessory...

Ciro #50212 - Phone Holder w/Charger - 7/8"-1" Handlebar Mount - Chrome

Installs on any 7/8" - 1" diameter round bars.FeaturesCharger model has 1.3 USB port for on-board charging as you ride (cable not included)Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure...

Ciro #50213 - Phone Holder w/Charger - 7/8"-1" Handlebar Mount - Black

Installs on any 7/8" - 1" diameter round bars.FeaturesCharger model has 1.3 USB port for on-board charging as you ride (cable not included)Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure...

Ciro #50214 - Phone Holder w/Charger - 1-1/4" Handlebar Mount - Chrome

Installs on any 1-1/4" diameter round bars.FeaturesCharger model has 1.3 USB port for on-board charging as you ride (cable not included)Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber...

Ciro #50215 - Phone Holder w/Charger - 1-1/4" Handlebar Mount - Black

Installs on any 1-1/4" diameter round bars.FeaturesCharger model has 1.3 USB port for on-board charging as you ride (cable not included)Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber...

Ciro #50216 - Phone Holder w/Charger - Fairing Mount - FLH

Phone Holder w/Charger - Fairing Mount - FLHFeaturesCharger model has 1.3 USB port for on-board charging as you ride (cable not included)Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber molded...

Ciro #50217 - Phone Holder w/Charger - Fairing Mount - FLH

Phone Holder w/Charger - Fairing Mount - FLHFeaturesCharger model has 1.3 USB port for on-board charging as you ride (cable not included)Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber molded...

Ciro #50314 - Phone Holder - 1-1/4" Handlebar Mount - Chrome

Installs on any 1-1/4" diameter round bars.FeaturesQuick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber molded fingersIntuitive ball mounting system allows for a broad range of angle...

Ciro #50316 - Smartphone/GPS Holder - w/o Charger - Black

With Fairing mount for '99-'13 FLHT/FLHX/FLHTCUTG models (except '07-'13 Screamin Eagle).FeaturesQuick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber molded fingersIntuitive ball mounting system...

Pingel #62137 - Mount - CB

Mount - CBFeaturesRelocate the antenna down low and out of the way of the detachable luggage rack or the Tour-Pak® on radio-equipped baggersNo need to change the location of the antenna every time the Tour-Pak® is installed or removed from the bikeKit...

Pingel #62144 - Antenna Mount Kit - FLHX

Antenna Mount Kit - FLHXFeaturesRelocate the antenna down low and out of the way of the detachable luggage rack or the Tour-Pak® on radio-equipped baggersNo need to change the location of the antenna every time the Tour-Pak® is installed or removed from...

Pingel #62145 - Antenna Mount - CB

Antenna Mount - CBFeaturesRelocate the antenna down low and out of the way of the detachable luggage rack or the Tour-Pak® on radio-equipped baggersNo need to change the location of the antenna every time the Tour-Pak® is installed or removed from the...

RAM Mounts #RAM-B-224-1U - Suction Cup Base - 1" - Ball Mount

Suction Cup Base - 1" - Ball MountFeaturesMade from high-strength composite and powder-coated marine-grade aluminum3-1/4" twist-locking suction cup base for an extra-strong hold1" rubber ball mountConnects to a large variety of RAM mounts...

Saddle Tramp #99-9600 - Radio Install Kit - '99-'13 FLHT/FLHX/FLTR

Radio Install Kit - '99-'13 FLHT/FLHX/FLTRFeaturesISO DIN radio provisionOne piece design molded in ASA plastic offers durable supportRubber trim gasket to fight moisture and vibrationPre-wired ASWC-1 harnessSpecsColor/FinishBlackProduct NameRadio...

Saddle Tramp #99-9800 - Radio Install Kit - '98-'13 FLHT/FLHX/FLTR/FLHR

For use w/ Single DIN radios.FeaturesRadio kit to be used when replacing the factory radioComes with water resistant radio face coverThe cover is attached to the kit using uniquely designed hinges that moves the cover out and up when radio adjustments...

Saddle Tramp #BC-AMP02 - Amp Mounting Bracket - '98-'13 FLH

Amp Mounting Bracket - '98-'13 FLHFeaturesWorks with most micro ampsSteel construction with UV powder coatingMolded carpet cover provides protection and a clean lookNo drilling requiredSpecsColor/FinishBlackRiding StyleStreetUnitsEachTypeAmplifierProduct...

Saddle Tramp #BC-AMP03 - Fairing Bracket - FLH '98-'13

Fairing Bracket - FLH '98-'13FeaturesWorks with most other Micro ampsSteel construction with UV powder coatingMolded carpet cover provides protection and a clean lookNo drilling requiredCan also be used for Batwing Fairing bracket repairSpecsProduct...

Saddle Tramp #BC-AMP04 - Amplifier Mount - FLT

Amplifier Mount - FLTFeaturesWorks with most other micro ampsSteel construction with UV powder coatingMolded carpet cover provides protection and a clean lookNo drilling requiredSpecsRiding StyleStreetColor/FinishBlackProduct...