Camshafts & Install Kits

S&S Cycle #330-0100 - Camshaft Kit - 551G Gear Drive - Twin Cam

Not for '06 Dyna.FeaturesDesigned for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesReverses the rear cam's direction of rotation, providing additional operating clearance...

S&S Cycle #330-0105 - Camshaft Kit - 557C Chain Drive - Twin Cam

Camshaft Kit - 557C Chain Drive - Twin CamFeaturesDesigned for Tri-Glides and other heavy bikes needing good bottom and mid-range performanceCamshaft's stock base circle permits the use of stock pushrodsShort duration produces lots of usable...

S&S Cycle #330-0106 - Camshaft Kit - 583C - Chain Drive - Twin Cam

For use with models with hydraulic tensioner chain drive system and require high lift valve springs.FeaturesGreat overall cam for Softail and DynaProvides strong low-end torque and horsepowerStrongest from 1500-5000 rpmMade in the USAInstaller must check...

S&S Cycle #330-0107 - Camshaft Kit - 583G - Gear Drive - Twin Cam

Not for '06 DynaCams for '00-'06 Twin Cams are for use with stock splined drive gears; for installation on '99 Twin Cams requires splined outer sprocket, S&S recommends Andrews 4340 steel drive sprocket.FeaturesReverses the rear cam's direction of...

S&S Cycle #330-0164 - Cam - H-Grind - Generator Style - Big Twin '48-'57

Cam - H-Grind - Generator Style - Big Twin '48-'57FeaturesOEM specification replacement hydraulic camshaft with unique front and rear timing specificationsH-grind is a dead-on reproduction of the stock cams used in '48-'84 Big TwinsPerfect for repair and...

S&S Cycle #330-0165 - Cam - H-Grind - Alternator Style - Big Twin '70-'77

Cam - H-Grind - Alternator Style - Big Twin '70-'77FeaturesOEM specification replacement hydraulic camshaft with unique front and rear timing specificationsH-grind is a dead-on reproduction of the stock cams used in '48-'84 Big TwinsPerfect for repair...

S&S Cycle #330-0166 - Cam - H-Grind - Alternator Style - Big Twin '78-'84

Cam - H-Grind - Alternator Style - Big Twin '78-'84FeaturesOEM specification replacement hydraulic camshaft with unique front and rear timing specificationsH-grind is a dead-on reproduction of the stock cams used in '48-'84 Big TwinsPerfect for repair...

S&S Cycle #330-0170 - Cam - H-Grind - Generator Style - Big Twin '58-'69

Cam - H-Grind - Generator Style - Big Twin '58-'69FeaturesOEM specification replacement hydraulic camshaft with unique front and rear timing specificationsH-grind is a dead-on reproduction of the stock cams used in '48-'84 Big TwinsPerfect for repair and...

S&S Cycle #330-0189 - Camshaft - 482 - Buell | XL

Camshaft - 482 - Buell | XLFeaturesTested on the dyno, street and track before being offered to the publicWorks with stock valve springs and stock non-adjustable pushrodsRecommended for S&S 883 to 1250 conversion kitsBest performance gains 3500-6500...

S&S Cycle #330-0299 - Camshaft Kit - Easy Start - MR103 Chain Drive - Twin Cam '07-'17 | Dyna '06

Camshaft Kit - Easy Start - MR103 Chain Drive - Twin Cam '07-'17 | Dyna '06FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and...

S&S Cycle #330-0303 - Camshaft Kit - Easy Start - MR103 Gear Drive - Twin Cam '07-'17 | Dyna '06

Includes 4-gear set.Due to the inherent characterics of gear drives, there may be more valve train noise.FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is...

S&S Cycle #330-0328 - Camshaft Kit - 635 H.O. - Chain Drive - Twin Cam

Cams for '06 Dyna and '07-'17 Twin Cam are for use with models with hydraulic tensioner chain drive system.FeaturesHigh lift camshaft for modified engines with 106" or greater displacement and compression ratios between 10.0:1 to 11.0:1Works with...

S&S Cycle #330-0339 - Camshaft - Easy Start - 635 H.O. Gear Drive - Twin Cam '07-'17 | Dyna '06

Camshaft - Easy Start - 635 H.O. Gear Drive - Twin Cam '07-'17 | Dyna '06FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the...

S&S Cycle #330-0343 - Camshft Kit - HP103 Chain Drive - Twin Cam '07-'17 | '06 Dyna

Camshft Kit - HP103 Chain Drive - Twin Cam '07-'17 | '06 DynaFeaturesDesigned as bolt in cams for engines with 103" and stock 9.7:1 compression ratio up to 10.5:1Works with stock, un-ported heads, but is great for S&S CNC ported headsPower in...

S&S Cycle #330-0346 - Camshaft Kit - Easy Start - HP103 Chain Drive - Twin Cam '07-'17 | Dyna '06

Camshaft Kit - Easy Start - HP103 Chain Drive - Twin Cam '07-'17 | Dyna '06FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and...

S&S Cycle #330-0438 - Camshaft - Easy Start - 635 H.O. Gear Drive - Twin Cam '99-'06 (except '06 Dyna)

Camshaft - Easy Start - 635 H.O. Gear Drive - Twin Cam '99-'06 (except '06 Dyna)FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted...

S&S Cycle #330-0442 - Camshft Kit - HP103 Chain Drive - Twin Cam '99-'06 Twin Cam (except '06 Dyna)

'99 Twin Cam requires a splined outer drive sprocket sold seperately.FeaturesDesigned as bolt in cams for engines with 103" and stock 9.7:1 compression ratio up to 10.5:1Works with stock, un-ported heads, but is great for S&S CNC ported...

S&S Cycle #330-0445 - Camshaft Kit - Easy Start - HP103 Chain Drive - Twin Cam '99-'06 (except '06 Dyna)

Camshaft Kit - Easy Start - HP103 Chain Drive - Twin Cam '99-'06 (except '06 Dyna)FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted...

S&S Cycle #330-0456 - Camshaft Kit - MR130 Chain Drive - Twin Cam '99-'06 (except '06 Dyna)

'99 Twin cam requires a splined outer drive sprocket (sold seperately).'06 requires high-lift valve springs.FeaturesBolt-in camshaft for 103” engines with stock 8.7:1 compression ratio up to 10.5:1 compression ratioWorks with stock, un-ported heads, but...

S&S Cycle #330-0459 - Camshaft Kit - Easy Start - MR103 Chain Drive - Twin Cam '99-'06 (except '06 Dyna)

Camshaft Kit - Easy Start - MR103 Chain Drive - Twin Cam '99-'06 (except '06 Dyna)FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted...

S&S Cycle #330-0466 - Camshaft Kit - Easy Start - MR103 Gear Drive - Twin Cam '99-'06 (except '06 Dyna)

Includes 4-gear set.Due to the inherent characterics of gear drives, there may be more valve train noise.FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is...

S&S Cycle #330-0470 - Camshaft Kit - MR103 Chain Drive - Twin Cam '07-'17 | Dyna '06

Camshaft Kit - MR103 Chain Drive - Twin Cam '07-'17 | Dyna '06FeaturesBolt-in camshaft for 103” engines with stock 8.7:1 compression ratio up to 10.5:1 compression ratioWorks with stock, un-ported heads, but is great for S&S CNC ported headsMore...

S&S Cycle #330-0540 - Cam Chest with Plate Kit - 509C Standard Cams - Twin Cam

For '99-'06 Twin Cam except '06 Dyna.FeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves valve timing and chain lifeImproves...

S&S Cycle #330-0541 - Cam Chest with Plate Kit - 510C - Standard Cams - Twin Cam

For '99-'06 Twin Cam, except '06 Dyna.FeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves valve timing and chain lifeImproves...