Engine

S&S Cycle #33-5212 - Cam Bearing Plate - Twin Cam

Cam Bearing Plate Heavy-duty steel cam bearing plate is recommended for use with all gear-drive cams and is included in S&S complete gear-drive cam kits Made in the U.S.A.

S&S Cycle #33-5266 - Camshaft Kit - 510G Gear Drive - Twin Cam

510G Camshaft Kit Cams designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1 Kit includes camshafts with inner gears, outer cam drive gear kit and camshaft installation kit: gearcover gasket, bearings, oil...

S&S Cycle #33-5267 - Camshaft Kit - 570G Gear Drive - Twin Cam

570G Camshaft Kit Designed for 88" to 103" CID engines with compression ratios between 9:1 and 10:1 Strongest from 3200-3700 rpm Increases valve timing accuracy by eliminating timing chain lash and loosely fit stock chain drive Reverses the rear...

S&S Cycle #33-5268 - Camshaft Kit - 585G - Gear Drive -Twin Cam

585G Gear Drive Camshaft Kit Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1 Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts...

S&S Cycle #33-5269 - Camshaft Kit - 625G - Gear Drive - Twin Cam

625G Gear Drive Camshaft Kit For 95/96/103 and 110 cubic inch engines with compression ratios from 10.0 to 10.75:1 Strongest from 3000-6000 rpm Increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive Reverses...

S&S Cycle #33-5270 - 640G Gear Drive Cam Kit

640 Series Grind Cam For 95/96/103/110 cubic-inch engines Compression ratios from 10.5:1 to 11.5:1 Strongest from 3000-6000 rpm High-lift springs and adjustable pushrods required

S&S Cycle #33-5353 - Lifters with HL²T Kit

Hydraulic Tappet with HL²T Kit Rollers have a larger-than-stock inner bearing race that reduces stress and increases axle life Each lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct operation Redesigned plunger...

S&S Cycle #33-5601 - Billet Tappet Covers - Polished - Twin Cam

Billet Tappet Covers CNC-machined from 6061 T-6 billet aluminum Billet material provides extra strength and dimensional stability over a wide temperature range; is also free of voids which can cause leaks and oil weeping Made in the U.S.A.

S&S Cycle #330-0002 - Camshaft Kit - 551C Chain Drive- Twin Cam

551C Chain Drive Camshaft Kit Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikes More power across the rpm range, with improved low and midrange torque, strongest...

S&S Cycle #330-0003 - Camshaft Kit - 570C Chain Drive - Twin Cam

570C Camshaft Kit Designed for 88" to 103" CID engines with compression ratios between 9:1 and 10:1 Kit includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, thread lock and instructions Strongest from 3200-3700 rpm Made in the USA ...

S&S Cycle #330-0004 - Camshaft Kit - 583C - Chain Drive - Twin Cam

583C Chain Drive Camshaft Kit Great overall cam for Softail and Dyna Provides strong low-end torque and horsepower Strongest from 1500-5000 rpm Made in the USA Installer must check coil bind, valve to valve clearance and valve to piston clearance. ...

S&S Cycle #330-0005 - Camshaft Kit - 585C - Chain Drive - Twin Cam

585C Chain Drive Camshaft Kit Designed for 88" to 107" engines with compression ratios from 10.0:0 to 10.5:1 and 100" and 107" engines with compression ratios 9.7:1 to 10.5:1 Strongest from 3500-6000 rpm for 88" to 103" engines and 2500-5000 rpm for...

S&S Cycle #330-0006 - Camshaft Kit - 625C - Chain Drive - Twin Cam

625C Chain Drive Camshaft Kit For 95" or larger engines with compression ratios between 10.0 to 10.75:1 High-lift springs and adjustable pushrods required Strongest from 3000-6000 rpm Made in the USA Installer must check coil bind, valve to valve...

S&S Cycle #330-0016 - Camshaft Kit - 509C Chain Drive - Twin Cam

509C Chain Drive Camshaft Kit Great low and mid-range torque Strongest from 1000-4500 RPM Bolt-in cams for 88 CID engines with stock compression ratios 180 psi cranking compression; no need for compression releases Lower lift allows them to be...

S&S Cycle #330-0017 - Camshaft Kit - 509G Gear Drive - Twin Cam

509G Gear Drive Camshaft Kit Bolt in cams for 88 CID engines with stock compression ratios Increases valve timing accuracy by eliminating timing chain lash and loosely fit stock chain drive Reverses the rear cam's direction of rotation, providing...

S&S Cycle #330-0053 - Easy Start Cam Kit

Easy Start Cam Kit for Twin Cam Start any engine regardless of displacement or compression ratio with a stock starter Save your starter and battery; tested for 10,000 starts without running battery down Allow for easy start by initially reducing crank...

S&S Cycle #330-0057 - Easy Start Cam Kit - Twin Cam

Easy Start Cam Kit for Twin Cam Start any engine regardless of displacement or compression ratio with a stock starter Save your starter and battery; tested for 10,000 starts without running battery down Allow for easy start by initially reducing crank...

S&S Cycle #330-0100 - Camshaft Kit - 551G Gear Drive - Twin Cam

551G Gear Drive Camshaft Kit Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikes Reverses the rear cam's direction of rotation, providing additional operating...

S&S Cycle #330-0105 - Camshaft Kit - 557C Chain Drive - Twin Cam

557 Series Grind Cam Kit Designed for Tri-Glides and other heavy bikes needing good bottom and mid-range performance Camshaft's stock base circle permits the use of stock pushrods Short duration produces lots of usable torque Bolt-in design Kit...

S&S Cycle #330-0106 - Camshaft Kit - 583C - Chain Drive - Twin Cam

583C Chain Drive Camshaft Kit Great overall cam for Softail and Dyna Provides strong low-end torque and horsepower Strongest from 1500-5000 rpm Made in the USA Installer must check coil bind, valve to valve clearance and valve to piston clearance. ...

S&S Cycle #330-0107 - Camshaft Kit - 583G - Gear Drive - Twin Cam

583G Gear Drive Camshaft Kit Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes, making higher cam lifts possible Increase valve timing accuracy by eliminating timing chain lash and loosely fit...

S&S Cycle #330-0189 - Camshaft - 482 - Buell | XL

482 Camshafts S&S Cams are tested on the dyno, street and track before being offered to the public Works with stock valve springs and stock non-adjustable pushrods Recommended for S&S 883 to 1250 conversion kits Best performance gains 3500-6500 rpm ...

S&S Cycle #330-0299 - Easy Start Cam Kit - Twin Cam

Easy Start Cam Kit for Twin Cam Start any engine regardless of displacement or compression ratio with a stock starter Save your starter and battery; tested for 10,000 starts without running battery down Allow for easy start by initially reducing crank...

S&S Cycle #330-0303 - Easy Start Cam Kit - Twin Cam

Easy Start Cam Kit for Twin Cam Start any engine regardless of displacement or compression ratio with a stock starter Save your starter and battery; tested for 10,000 starts without running battery down Allow for easy start by initially reducing crank...