Camshafts & Install Kits

Andrews #214045 - Cams - PB+ - XL

Cams - PB+ - XLFeaturesBolt-in four-cam setMore horsepower and torqueStock springs OK to 7000 rpm, requires no headworkMade in the U.S.A.Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance...

Andrews #217465 - Cam - Bolt-In - 465B - M8

Cam - Bolt-In - 465B - M8FeaturesBolt-in chain drive cam for 107”-117” enginesUse with stock valve springsFor heavy and middle weight bikesGreat low to mid rpm torque (1200-5600 rpm)Made in the USACam Specs are measured in the engine on the lifter @ 0...

Cometic #C10178 - Cam Change Kit M8 Cam Change Kit Oe#25700731

Milwaukee 8 EST Gasket Kit At Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher level of performance for today's powerful V-Twin...

Cometic #C9623F - Cam Service Evo Kit Evo

Panhead/Shovelhead Gear Housing Gasket At Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher level of performance for today’s powerful...

Cometic #C9624F - Cam Service Evo Kit Evo

Evo Big Twin Cam Service Kit At Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher level of performance for today's powerful V-Twin...

Cometic #C9664 - Cam Service Twin Cam Kit Twin Cam Oe#17045-99

Twin Cam Cam Housing At Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher level of performance for today's powerful V-Twin enginesYou...

Feuling Parts #2030 - Quick Change and Top End Camshaft Install Kit - M8

Quick Change and Top End Camshaft Install Kit - M8FeaturesEach kit includes cam plate roller bearings, Koyo Torrington® full roller inner needle bearings, 12-point ARP® camshaft and crankshaft bolts, ARP® fastener moly paste and Loctite® compound and...

Feuling Parts #8070 - Tensioner Pad - Stock Replacement - M8

Tensioner Pad - Stock Replacement - M8FeaturesInjection molded nylon with PTFE (polytetrafluoroethylene) added to increase wear and friction resistanceIncludes chain tensioner pad and pinWorks with the factory aluminum housing and hydraulic unitMade in...

Feuling Parts #8073 - Cam Chain Tensioner - Billet - M8

Cam Chain Tensioner - Billet - M8FeaturesTensioner housings are precision machined from billet 6061 aluminum, pads are injection-molded nylon with PTFE added to increase wear and friction resistanceReplaces the factory cast unit with a billet housing and...

Hot Cams CIK-001 - Installation Kit - 1051492

Contains degree wheel, standard unit indicator, adjustable magnetic stand, and three positive stops (10 mm, 12 mm and 14 mm threads) Can be used to install and adjust timing of any cam Wooden carrying case

James Gasket #JGI-25225-70-KX - Cam Quick Change - '70-'92 Big Twin

Cam Quick Change - '70-'92 Big TwinFeaturesKit includes all necessary gaskets, seals, O-rings and cork washers for doing a cam changeSpecsUnitsKitRiding StyleStreetTypeCam ChangeMaterialMetalProduct NameGasket Kit

James Gasket #JGI-25225-93-KX - Cam Quick Change - 80" - '93-'99 EVO Big Twin

Cam Quick Change - 80" - '93-'99 EVO Big TwinFeaturesKit includes all necessary gaskets, seals, O-rings and cork washers for doing a cam changeSpecsMaterialMetalProduct NameGasket KitRiding StyleStreetTypeCam ChangeUnitsKit

James Gaskets #25225-70-K - Gasket Cam Change W/Paper Kit W/Paper 25225-70-K

Shovelhead Gasket Kit Genuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

James Gaskets #25225-93-K - Gasket Cam Change W/Paper Kit W/Paper 25225-93-K

Big Twin Gasket Kit

Jims #25581-36 - Cam Bushing - Big Twin

Cam Bushing - Big TwinFeaturesBushing is made from solid bronze bar stockMachined in one operation with a tolerance of .0002"Features a lead-in for ease of installationMade in the U.S.A.SpecsDiameter1.0035"Riding StyleStreetTypeCam...