Camshafts

Feuling Parts #8078 - Replacemt Tensioner Pads - Hydraulic Lash Units - Twin Cam

Replacemt Tensioner Pads - Hydraulic Lash Units - Twin CamFeaturesTensioner pads are a direct drop-in replacement for the factory cast tensioner housings as well as the billet Feuling tensioner housingsPads are injection molded Nylon with PTFE added to...

Feuling Parts #8080 - Hydraulic Tensioner Kit for Conversion Style Camshafts - Stock Replacement T/C '07-'17 | Dyna '06

For use with conversion camshafts when updating '01-'06 Twin Cam engines (except '01 EFI Touring, '06 Dyna) w/o cam postion sensor to the hydraulic cam chain tensioner system.Will also fit '07-'17 Twin Cam and '06 Dyna models as an upgrade to the stock...

Feuling Parts #8081 - Hydraulic Tensioner Kit - OE Style Cams - Without Cam Position Sensor - Twin Cam '01-'06

For use on with original '99-'06 cams and conversion camplate on '01-'06 models w/o cam position sensor.Includes:• 1x Outer Chain• 1x Inner Chain• 1x Outer Crank Sprocket 17 Tooth• 1x Outer Cam Sprocket 34 Tooth• 1x Outer Hydraulic Tensioner Unit• 1x...

Feuling Parts #8082 - Hydraulic Tensioner Kit - OE Style Cams - With Cam Position Sensor - Twin Cam '99-'01

For use with original '99-'06 cams and conversion camplate on '99-'01 models with cam position sensor.Includes:• 1x Outer Chain• 1x Inner Chain• 1x Outer Crank Sprocket 17 Tooth• 1x Outer Cam Sprocket 34 Tooth (Special Sprocket with Timing Tab)• 1x Outer...

Feuling Parts #8083 - Hydraulic Tensioner Kit for Conversion Style Camshafts - '99-'01 Models w/Cam Position Sensor

For use with conversion camshafts when updating '99-'00 Twin Cam, '01 EFI Touring engines with cam position sensor to the hydraulic cam chain tensioner system.Requires separate purchase of conversion camshafts.Includes:• 1x Outer Chain• 1x Inner Chain•...

Koso MU623000 - Cam Chain Tensioner

Arm made of 6061 aluminum, wheel made of structured steel Long lasting OEM replacement

S&S Cycle #106-4033 - Camshaft Kit - OES Grind - Gear Drive - Twin Cam (except '06 Dyna)

Not for '06 Dyna.FeaturesBolt-in cam providing power from 2200-5200 RPM in engines with displacement from 107-135 cubic inchesBumps horse power to over 100 and makes bigger power towards top end RPM rangeCompatible with compression ratios up to 11...

S&S Cycle #106-4380 - Camshaft Kit - 510C Chain Drive - Twin Cam

Camshaft Kit - 510C Chain Drive - Twin CamFeaturesKit includes cams, gearcover gasket, bearings, retaining ring, o-ring, thread lock and instructionsBolt in cam for 88", 95", 96" and 103" CID engines with compression ratios below 9...

S&S Cycle #106-4381 - Camshaft Kit - 570C Chain Drive - Twin Cam

Camshaft Kit - 570C Chain Drive - Twin CamFeaturesDesigned for 88" to 103" CID engines with compression ratios between 9:1 and 10:1Kit includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, thread lock and instructionsStrongest...

S&S Cycle #106-4382 - Camshaft Kit - 585C - Chain Drive - Twin Cam

Cams for '06 Dyna and '07-'17 Twin Cam are for use with models with hydraulic tensioner chain drive system.FeaturesDesigned for 88" to 107" engines with compression ratios from 10.0:0 to 10.5:1 and 100" and 107" engines with...

S&S Cycle #106-4383 - Camshaft Kit - 625C - Chain Drive - Twin Cam

Cams for '06 Dyna and '07-'17 Twin Cam are for use with models with hydraulic tensioner chain drive systems and require high-lift valve springs.FeaturesFor 95" or larger engines with compression ratios between 10.0 to 10.75:1High-lift springs and...

S&S Cycle #106-4840 - Camshaft - Easy Start - 640 Gear Drive - Twin Cam '99-'06 (except '06 Dyna)

Includes 4-gear set.Due to the inherent characterics of gear drives, there may be more valve train noise.FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is...

S&S Cycle #106-4858 - Camshaft Kit - 551C Chain Drive - Twin Cam | Dyna

Can be used with stock pushrods, springs, and lifters.FeaturesDesigned for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesMore power across the rpm range, with improved low and...

S&S Cycle #106-4868 - Camshaft Kit - 551G Gear Drive - Twin Cam | Dyna

Can be used with stock pushrods, springs, and lifters.FeaturesDesigned for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesReverses the rear cam's direction of rotation, providing...

S&S Cycle #106-4947 - Camshaft Kit - Easy Start - 551 Chain Drive - Twin Cam '07-'17

Camshaft Kit - Easy Start - 551 Chain Drive - Twin Cam '07-'17FeaturesAllows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs...