Frame

#20010 - XL Rigid Frame

XL Rigid Frame

- REPLICA BIKE KIT 1957 PANHEAD

REPLICA BIKE KIT 1957 PANHEAD

AEE - 6 inch Hardhead Frame Neck Raw Steel

6 inch Hardhead Frame Neck Raw Steel

Arlen Ness #11-023 - 1" Lowered Kickstand - Chrome

1" Lowered Kickstand - ChromeFeaturesChrome-plated forged steel1" shorter than stock kickstandMounts to stock mount and accept stock springSpecsColor/FinishChromeMaterialSteelSizeShortens 1"UnitsEachProduct NameKickstandRiding...

Arlen Ness #110-000 - Kickstand Extension - Chrome

Kickstand Extension - ChromeFeaturesExtension for stock kickstand to make it reach out past custom boards when in the up positionHelps stock kickstand not get lost under aftermarket floorboardsCNC machined from solid 6061 aluminumDual setscrew...

Arlen Ness #110-001 - Kickstand Tab Extension

Kickstand Tab ExtensionFeaturesCNC machined from billet aluminumInstalls over factory kickstand tabEliminates difficulty reaching kickstand with extended floorboardsSpecsColor/FinishBlackProduct NameExtensionUnitsEachMounting...

BOBBER STYLE RIGID FRAME FOR WIDE TIRE BIG TWIN

Weight: 61.00 180 Tire with 1 1/2" Belt Drive or 200 Tire with Chain Drive Manufactured with 5 speed transmission mount plate welded in place for ultimate strength No tank mounts, so you can mount bobber style gas tanks Uses 1986/1999 Softail oil...

BOBBER STYLE RIGID FRAMES FOR BIG TWIN

Weight: 58.00These rigid frames have all the rugged good looks of those found years ago but built with the technology of the 21st century. Today's high output engines require the utmost frame strength, as well as good brakes. These frames were designed...

BOBBER STYLE RIGID FRAMES FOR WIDE TIRE BIG TWIN

Weight: 57.00Special Features4 or 5 Speed180 mm Tire with 1 1/2" Belt or 200 mm Tire with Chain1 1/2" O.D. Drawn Over Mandrel (DOM) ASTM A513-96T5 .188" wall tubing for backbone strength1 1/4" O.D. x .120" wall thickness tubing for cradle and tail...

BOBBER STYLE RIGID FRAMES FOR WIDE TIRE BIG TWIN

Weight: 58.00Special Features4 or 5 Speed180 mm Tire with 1 1/2" Belt or 200 mm Tire with Chain1 1/2" O.D. Drawn Over Mandrel (DOM) ASTM A513-96T5 .188" wall tubing for backbone strength1 1/4" O.D. x .120" wall thickness tubing for cradle and tail...

Cobra #601-2003 - Freeway Bar (Highway Bar) - Chrome - FLH

Will not fit models equipped with fairing lowers.FeaturesMade from stout 1-1/2" diameter thick-wall steel with heavy-duty welded flangesConstructed for strength and long lasting good looksOffers plenty of foot room around floorboards and foot...

Cobra #601-2100 - Freeway Bar (Highway Bar) - Chrome - Softail

Not for models with front signals mounted below driving lights.FeaturesMade from stout 1-1/2" diameter thick-wall steel with heavy-duty welded flangesConstructed for strength and long lasting good looksOffers plenty of foot room around floorboards...

Cobra #601-2105 - Freeway Bar - Chrome - FLSTC

Freeway Bar - Chrome - FLSTCFeaturesMade from stout 1-1/2" diameter thick-wall steel with heavy-duty welded flangesConstructed for strength and long lasting good looksOffers plenty of foot room around floorboards and foot controlsProvides...

Cobra #601-2109 - V-Bend Freeway Bar (Highway Bar) - Chrome - XL

Only for use on vehicles without forward controls.FeaturesPresents a v-bend contour that tapers from the top to the narrower bottom for a more aggressive lookPresents a more aggressive shape and uses stout 1-1/2" round steel tubesConstructed for...

Cobra #601-2110 - V-Bend Freeway Bar (Highway Bar) - Chrome - Dyna

Only for use on vehicles without forward controls or floorboards.FeaturesPresents a v-bend contour that tapers from the top to the narrower bottom for a more aggressive lookPresents a more aggressive shape and uses stout 1-1/2" round steel...