Engine

Andrews #269150 - Cam - TS550 Indian 111 - 2013+

Cam - TS550 Indian 111 - 2013+FeaturesWith four valve heads and 106 cubic inches more power is readily availableSpecsRiding StyleStreetUnitsEachGrindTS550Product NameCamshaft

Andrews #269170 - Cam - TS570 Indian 111 - 2013+

Cam - TS570 Indian 111 - 2013+FeaturesWith four valve heads and 106 cubic inches more power is readily availableSpecsRiding StyleStreetProduct NameCamshaftGrindTS570UnitsEach

Andrews #269420 - Performance Cam

Performance CamFeatures450 cam has great pulling power throughout the rpm range420 bolt-in street cam with more torque and HP for all around riding with stock CR (1800-5200 rpm range)Made in the U.S.ASpecsProduct NameCamRiding StyleStreetUnitsEach

Andrews #269450 - Performance Cam

Performance CamFeatures450 cam has great pulling power throughout the rpm range420 bolt-in street cam with more torque and HP for all around riding with stock CR (1800-5200 rpm range)Made in the U.S.ASpecsProduct NameCamRiding StyleStreetUnitsEach

Andrews #271100 - High-Lift Upper Spring Collars

High-Lift Upper Spring CollarsFeaturesCams with .600 lift can easily be accommodated when used with high-lift springsMade from T-6 aluminum, collars are lightweight, hard-coated and very strongFor 74" and 80" motorsMade in the U.S.A.SpecsUnits4...

Andrews #272110 - High-Lift Valve Springs

High-Lift Valve SpringsFeaturesProvide correct spring force for any of our performance cams when used in 74" and 80" motorsMax lift; installation does not require complicated machining but does require proper valvetrain setupMade in the U.S.A...

Andrews #273120 - Valve Spring Collars

Valve Spring CollarsFeaturesSimilar to stock 80-style parts, but lower profile for easier installation of higher lift camsRequired parts if you use 80-style valve guides that utilize "K" line stem sealsHeat-treated steelFor 74" and...

Andrews #276150 - Medium-Lift Upper Spring Collar Set

Medium-Lift Upper Spring Collar SetFeaturesIntended to work with stock springs and add approximately .060" spring travel with no other modifications on 66-84 74" and 80" motorsThe easy way to install B or #2 cams in stock headsMade in the...

Andrews #277160 - Low-Profile Lower Spring Collars - XL

Low-Profile Lower Spring Collars - XLFeaturesSimilar to the late H-D collarsWill provide .060" more spring travel than stock collarsMade in the U.S.A.SpecsRiding StyleStreetProduct NameLower Spring CollarStyleLow-ProfileUnitsSet of 4

Andrews #288015 - Cam Chain Drive Sprocket

Cam Chain Drive SprocketFeaturesManufactured from 4340 steelCam drive sprockets replace the stock 34-tooth cam drive sprocket and include shimsCrankshaft cam drive is a 17-tooth sprocket that can be used with OEM cam drive sprocketMade in the U.S.A...

Andrews #288020 - Crank Shaft Cam Drive Sprocket

Crank Shaft Cam Drive SprocketFeaturesCan be used with OEM cam drive sprocketMade in the U.S.A.SpecsMaterialSteelTypeCrankshaftUnitsEachRiding StyleStreetProduct NameSprocket

Andrews #288121 - Cam Set - TW21 - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700 - 5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well...

Andrews #288121G - Cam Set - 21G - Gear Drive - Twin Cam

Bolt-in cams.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cams.Cam works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06...

Andrews #288126 - Cam Set - TW26A - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured with the...

Andrews #288126G - Cam Set - TW26 - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Not for '06 dyna.FeaturesManufactured with the help of a computer with...