Bottom End

Feuling Parts #7322 - Camchest Kit - OE+ Hydraulic Cam Chain Conversion - 543 Series - Twin Cam

Overlap: 27°1900-6000 rpm range.Not for '06 dyna.Includes:• OE+ Oil Pump• OE+ Camplate• Reaper Series Conversion Camshafts• HP+ Hydraulic Roller Lifters• Quick Install Adjustable Pushrods• Pushrod Tubes• Sprockets• Cam Chains• Sprocket Spacers• Timken...

Feuling Parts #7324 - Camchest Kit - OE+ Hydraulic Cam Chain Conversion - 574 Series - Twin Cam

Overlap: 29°2100-6500 rpm range.Not for '06 Dyna.Includes:• OE+ Oil Pump• OE+ Camplate• Reaper Series Conversion Camshafts• HP+ Hydraulic Roller Lifters• Quick Install Adjustable Pushrods• Pushrod Tubes• Sprockets• Cam Chains• Sprocket Spacers• Timken...

Feuling Parts #7474 - HP+® Oiling System/Camchest Kit - Twin Cam '07-'17 | Dyna '06

Kit Includes:• HP+® High Volume Oil Pump• High Flow Camplate• HP+® Lifters• Billet Tensioner Housings• Tensioner Pads• Cam/Crank Sprockets• Sprocket Alignment Spacers• Cam Chains• Cam Bearings• Gaskets• Hardware• O-ringsFeaturesFreshen up camchest and...

Feuling Parts #8001 - Plate Bearing Retainer - Cam - Twin Cam

Plate Bearing Retainer - Cam - Twin CamFeaturesCam bearing retainer plate and hardwareMade in the USARecommended for use with all Twin Cam model cam plates.Not for '06 Dyna and Screamin' Eagle support plates.SpecsRiding...

Feuling Parts #8002 - Pressure Relief Kit - Valve Plunger, Spring & Roll Pin - Camplate - Twin Cam

Pressure Relief Kit - Valve Plunger, Spring & Roll Pin - Camplate - Twin CamFeaturesIncreases pressure relief valve pop-off psiKit includes valve plunger, spring and roll pinSpring alone provides proper spring rate to control pop-off pressure and oil...

Feuling Parts #8003 - Chain Tensioner Pins - Camplate - Twin Cam (except '06 Dyna)

Chain Tensioner Pins - Camplate - Twin Cam (except '06 Dyna)FeaturesEnsure proper press fit when changing Twin Cam chain drive cam plates or replacing chain drive tensionersMade from heat-treated chromoly steelMade in the USAUse with retaining ring...

Feuling Parts #8007 - Pressure Relief Kit - M8

Pressure Relief Kit - M8FeaturesIncreases pressure relief valve pop-off psiKit includes steel plunger valve, compression spring and roll pinSpring alone provides proper spring rate to control pop-off pressure and oil flow in bypass portWorks with factory...

Feuling Parts #8019 - Camplate Pressure Relief Spring - Twin Cam Engine Camplates '99-'17

Camplate Pressure Relief Spring - Twin Cam Engine Camplates '99-'17FeaturesIncreases pressure relief valve pop-off pressureSpring alone provides proper spring rate to control pop-off pressure and oil flow in bypass portMade in the USASpecsUnits6...

Feuling Parts #8030 - OE+ Camplate for Gear Drive Cams - Twin Cam '99-'06

Not for '06 Dyna.Has a tighter cam bearing bore tolerance for improved press fit.For use with factory or any Twin Cam oil pump with the '99-'06 bolt pattern. Compatible with Feuling® oil pumps: 0932-0018, 0932-0089 and 0932-0020.Includes:• Camplate•...

Feuling Parts #8031 - OE+ Camplate for Chain Drive Cams w/Spring Tensioners - Twin Cam '99-'06

Not for '06 Dyna.Designed for original fitment mechanical spring tensioners.Has a tighter cam bearing bore tolerance for improved press fit.For use with factory or any Twin Cam oil pump with the '99-'06 bolt pattern.Compatible with Feuling® oil pump:...

Feuling Parts #8032 - OE+ Hydraulic Tensioner Conversion Camplate for Stock Chain Drive Cams - Twin Cam '99-'06

Not for '06 Dyna.Has a tighter cam bearing bore tolerance for improved press fit.Requires '07-'17 style pump, hydraulic chain drive system (tensioners, chains, sprockets and hardware). Feuling tensioner kit: 0925-1069 or 0925-1070Compatible with Feuling®...

Feuling Parts #8033 - OE+ Camplate for Chain/Gear Drive Cams - Twin Cam '07-'17 | Dyna '06

Gear drive cams requires block off plates.Has a tighter cam journal bore tolerance for improved fitment.For use with factory and or any Twin Cam oil pump with '07-'17 bolt pattern.Compatible with Feuling oil pump: 0932-0090, 0932-0023, 0932-0026...

Feuling Parts #8040 - Sprocket Spacer - Camshaft Alignment - 0.297"-0.357" - Twin Cam '99-'06 (except '06 Dyna)

Sprocket Spacer - Camshaft Alignment - 0.297"-0.357" - Twin Cam '99-'06 (except '06 Dyna)FeaturesSpacers fit stock and stock replacement early style camshafts and conversion cam plates which update the early style camshafts to the late style...

Feuling Parts #8041 - Spacer Alignment/Thrust Washer - Camshaft Sprocket - M8 |Twin Cam '07-'17 | Dyna '06

Not for models with 121" VVT motors.Kit Includes:• 1x 0.100" Front Cam Thrust Washer• 1x 0.110" Rear Cam Sprocket Alignment Washer• 1x 0.120" Rear Cam Sprocket Alignment Washer• 1x 0.130" Rear Cam Sprocket Alignment Washer• 1x 0...

Feuling Parts #8060 - Inner Roll Chain - 16 Link - Twin Cam

Will also fit '99-'06 engines with conversion camshaft upgrades to the hydraulic tension system.FeaturesStock replacement chainsSpecsRiding StyleStreetUnitsEachNumber of Links16Product NameChainTypeCamMounting PositionInner