S&S Cycle

S&S Cycle #900-4119RA - Forged Standard Rocker Arm

Forged Standard Rocker Arm An economical solution for stock rebuilds, and mild performance upgrades Forged from 8620 steel for greater strength than stock or cast steel Feature the same .750" long rocker shaft bushings as S&S Roller Rockers: longer...

S&S Cycle #900-4320A - Roller Rocker Arms

Forged Roller Rocker Arms Machined from 8620 forged steel and heat treated for maximum strength Feature the exclusive .750" long S&S rocker arm bushing which provides 50% more load bearing surface than stock .500" bushings Can be oiled through...

S&S Cycle #91-7702 - 96" Big Bore Kit

96" Big Bore Kit Cylinders are constructed from premium aluminum castings with cast-in iron liners Kits include cylinders, pistons, rings and gaskets (head, base and exhaust) Made in the U.S.A. This project requires a skilled technician. It is the...

S&S Cycle #91-9024 - Cylinders and Pistons - 80" - Low Compression

Stock Bore 80" Cylinder and Standard Compression Piston Kit Intended to replace the cylinders and pistons of a 80" Shovelhead engine and maintain the stock compression ratio of 8:1 Compatible with stock or S&S cylinder heads Includes S&S 3.5" bore...

S&S Cycle #92-2026 - Replacement Pistons with Rings

Super Stock™ Cylinder Heads S&S heads give great performance, and work with additional upgrades Kits are fully assembled, and include stainless steel valves and high-lift springs (up to .640 lift) Intake manifold, pistons and gasket kits are sold...

S&S Cycle #92-2027 - Replacement Pistons with Rings

Super Stock™ Cylinder Heads S&S heads give great performance, and work with additional upgrades Kits are fully assembled, and include stainless steel valves and high-lift springs (up to .640 lift) Intake manifold, pistons and gasket kits are sold...

S&S Cycle #92-2028 - Replacement Pistons with Rings

Super Stock™ Cylinder Heads S&S heads give great performance, and work with additional upgrades Kits are fully assembled, and include stainless steel valves and high-lift springs (up to .640 lift) Intake manifold, pistons and gasket kits are sold...

S&S Cycle #93-3010 - Head Bolt Kit - Big Twin/XL

Head Bolt Kit 12-point bolts Complete kit

S&S Cycle #93-4022 - Pushrod Cover O-Ring Kit

Pushrod Cover O-Ring Kit For O-ring style bottom cover Includes all parts for four pushrods: top, middle and bottom O-rings

S&S Cycle #93-4070 - Pushrod Cover Keeper Set - Chrome - 2.400"

Pushrod Cover Keeper Set For use in custom applications where stock keepers won't fit Chromed steel finish Sold in kits of four assemblies; enough for one engine

S&S Cycle #93-4106 - Pushrod Cover Keeper Set - Chrome - 3.330"

Pushrod Cover Keeper Set For use in custom applications where stock keepers won't fit Chromed steel finish Sold in kits of four assemblies; enough for one engine

S&S Cycle #93-4115 - Pushrod Cover Keeper Set - Chrome - 2.800"

Pushrod Cover Keeper Set For use in custom applications where stock keepers won't fit Chromed steel finish Sold in kits of four assemblies; enough for one engine

S&S Cycle #93-5068 - Solid Pushrods - Big Twin

Solid Lifter Conversion Kit Converts stock hydraulic lifters to adjustable solids Kit includes four nonadjustable steel pushrods, four adjustable inserts and instructions Made in the U.S.A.

S&S Cycle #93-5076 - Adjustable Pushrods - Big Twin

Adjustable Pushrods .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or removal Made in the U.S.A.

S&S Cycle #93-5120 - Quickee Pushrods - Big Twin

Quickee Pushrods Features revolutionary design - allows quicker, easier installation without the removal of the rocker covers .4375” diameter Chromoly steel Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply...

S&S Cycle #93-5123 - Quickee Pushrods - Big Twin

Quickee Pushrods Features revolutionary design - allows quicker, easier installation without the removal of the rocker covers .4375” diameter Chromoly steel Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply...

S&S Cycle #930-0051 - Adjustable Pushrods

Adjustable Chromoly Pushrod Set Made from aircraft-grade seamless 4130 chromoly heat-treated steel tubing to be lighter and stronger than stock Contains two intake and two exhaust pushrods for the most accurate geometry and best strength...

S&S Cycle #930-0087 - Gaskets - 4" - Evo - .043"

Head Gaskets Head gaskets are made from aramid fiber-reinforced premium graphite material with a steel core, stainless steel fire ring and anti-stick coating Made in the USA

S&S Cycle #930-0088 - Gaskets - 74/80" - .032"

Head Gaskets Head gaskets are made from aramid fiber-reinforced premium graphite material with a steel core, stainless steel fire ring and anti-stick coating Made in the USA

S&S Cycle #930-0089 - Gaskets - 3-5/8" - Shovelhead

Head Gaskets Head gaskets are made from aramid fiber-reinforced premium graphite material with a steel core, stainless steel fire ring and anti-stick coating Made in the USA

S&S Cycle #930-0091 - Gaskets - 3.625" - .045"

Head Gaskets Head gaskets are made from aramid fiber-reinforced premium graphite material with a steel core, stainless steel fire ring and anti-stick coating Made in the USA

S&S Cycle #930-0092 - Base Gaskets - 3.5" - V2

Base Gaskets Base gaskets feature S&S Pro-Formance micropore™ compound proven to resist failure due to extrusion or blow out All gaskets sold in pairs Made in the U.S.A.

S&S Cycle #930-0093 - Base Gaskets - 3.625" - V2

Base Gaskets Base gaskets feature S&S Pro-Formance micropore™ compound proven to resist failure due to extrusion or blow out All gaskets sold in pairs Made in the U.S.A.

S&S Cycle #930-0094 - Base Gaskets - 4"

Base Gaskets Base gaskets feature S&S Pro-Formance micropore™ compound proven to resist failure due to extrusion or blow out All gaskets sold in pairs Made in the U.S.A.