Tools & Supplies

Jims #967-5 - Inner Primary Bearing Tool - Removal

Inner Primary Bearing Tool - RemovalFeaturesSafely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearingAlso removes and installs inner primary bearing and seal that transmission mainshaft...

Jims #96780-32A - Piston Pin Keeper Tool

Piston Pin Keeper ToolFeaturesThis tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention possibleUse to install retaining ring in pistonMade in the U.S.A.SpecsColor/FinishBlackRiding...

Jims #96780-58A - Piston Pin Lock Ring Tool - Big Twin

Piston Pin Lock Ring Tool - Big TwinFeaturesUse to install lock ring (Harley-Davidson® No. 22582-52) in piston having .515” inner diameter wrist pins, like most aftermarket pistonsThis tool will install “spiral lock” rings in one easy step without...

Jims #96830-51 - Pinion Gear Puller - Evolution/Shovelhead

Pinion Gear Puller - Evolution/ShovelheadFeaturesUse to install pressed on splined pinion gears on Harley-Davidson® Big TwinAlso can be used to remove pinion gear on Big Twin's and SportstersMade in the U.S.A.SpecsProduct...

Jims #969 - O² Sensor Tool - Socket

O² Sensor Tool - SocketFeaturesRemove and install oxygen sensors on fuel-injected modelsSocket tool will withstand up to 125 ft.-lbs. of torqueMade in the USASpecsRiding StyleStreetUnitsEachDrive Size3/8"Product NameO² Sensor...

Jims #970 - Axle Locker Tool - 3rd Hand

Axle Locker Tool - 3rd HandFeaturesEliminates the need for a helper or trying to blindly hold the axle from the other side of the tirePrevents axle from moving while torquing down the axle nut after setting belt tensionMade in the U.S.A...

Jims #97081-54 - Sprocket Shaft Bearing Press Tool

Sprocket Shaft Bearing Press ToolFeaturesUse on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearingOptional sleeves sold separately for use on '86-'03 XL and '94-'03 BuellMade in the U.S.A.SpecsProduct...

Jims #972 - Gear Seal Installer - Main Drive - 6-Speed

Gear Seal Installer - Main Drive - 6-SpeedFeaturesUse to install main drive gear oil seal to the proper depth with transmission assembledIncludes protective sleeve for seal, which can be used to protect main drive gear inner bearings during...

Jims #97225-55 - Sprocket Shift Bearing Installation Tool

Sprocket Shift Bearing Installation ToolFeaturesUsed on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearingMade in the U.S.A.SpecsRiding StyleStreetUnitsEachProduct NameBearing InstallerApplicationSprocket...

Jims #973 - Sprocket Bearing Installer Tool

Sprocket Bearing Installer ToolFeaturesAllows installation of shaft bearing on '06 Harley-Davidson® Dyna Glide and all '07-'17 Twin Cam modelsAn adapter for JIMS® Sprocket Shaft Bearing ToolSpecsApplicationSprocket ShaftProduct NameAdapterRiding...

Jims #976 - Rotator Tool - Engine - Big Twin

Rotator Tool - Engine - Big TwinFeaturesRotates flywheel/piston assembly with engine still in frame or on a benchThe perfect tool when doing pushrod adjustments, building big-inch engines and checking operating clearancesAlso can be used to keep the...

Jims #977 - Wrench - Fork Stem Nut

Wrench - Fork Stem NutFeaturesThis tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removalNormally to get access to the top stem nut requires the need to remove the radio packageSaves up to 45 minutes for...

Jims #981 - Main Drive Gear Tool - Cruise Drive/6-Speed

Main Drive Gear Tool - Cruise Drive/6-SpeedFeaturesHolds the main drive gear square to its bearing bore, eliminating any marring of gear or bearingsInstalls the main drive gear without removing the transmissionMade in the USASpecsColor/FinishBlackProduct...

Jims #984 - Door Puller - Transmission - '06 Dyna/'07-'17 Big Twin

Door Puller - Transmission - '06 Dyna/'07-'17 Big TwinFeaturesRemoves transmission door with gears and shaft attachedMade in the USAPuller will not damage door bearings.SpecsProduct NameDoor PullerRiding...

Jims #985 - Removal Tool - Shifter Shaft

Removal Tool - Shifter ShaftFeaturesLoosens and removes both shifter shafts from transmission door, allowing further disassembly of transmissionMade in the USASpecsColor/FinishBlackTypeShifter ShaftUnitsEachRiding StyleStreetProduct NameRemoval Tool