Tools & Supplies

Motion PRO #08-0631 - Crankshaft Puller

Crankshaft PullerFeatures25 mm and 40 mm face plate adapters ensure the crankshaft is pulled perfectly straight into bearingsPrecision tool used to install press-in crankshafts in an engine caseTime-saving method maintains crankshaft true during...

Motion PRO #08-0633 - Steering Race Tool - Removal/Installation - Harley-Davidson

Steering Race Tool - Removal/Installation - Harley-DavidsonFeatures2-in-1 design quickly and precisely remove and install outer bearing race from the steering head without the use of a hammer and punchPuller design ensures bearing is pulled perfectly...

Motion PRO #08-0635 - Axle Socket - Installation/Removal - Rear Axle - Black

Axle Socket - Installation/Removal - Rear Axle - BlackFeaturesFacilitates loosening and tightening of the hard-to-reach rear axle nut on Harley-Davidson® baggersCaptive swivel extension with a durable plastic sleeve protects exhaust systemRated for up to...

Motion PRO #08-0636 - Counter/Shaft Seal Puller

Counter/Shaft Seal PullerFeaturesUnique expansion mechanism ensures seal is pulled straight and will not damage engine cases during extractionSafely removes countershaft seals with an inner diameter of 29 mm to 47 mmThe only puller designed specifically...

Motion PRO #08-0641 - Valve Spring Compressor - 24 mm

Valve Spring Compressor - 24 mmFeaturesQuick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valvesWorks on all motorcycle, ATV, UTV, and small engine cylinder...

Motion PRO #08-0642 - Chain Tool - Sprocket Jammer™

Chain Tool - Sprocket Jammer™FeaturesPrevents rotation of chain and sprockets for easy removal or installation of countershaft nutCan be used to pull rear wheel against chain blocks when tightening rear axleCNC billet aluminum constructionFeatures laser...

Motion PRO #08-0646 - Hose Removal Tool

Hose Removal ToolFeaturesFacilitates removal of fuel and cooling system hosesOne end is used to loosen stuck hose, the other end assists in pulling the hose off the fittingReduces the possibility of damage to hoses and related componentsLock nut at base...

Motion PRO #08-0648 - Damper Rod Bleed Tool - 5-in-1

Damper Rod Bleed Tool - 5-in-1FeaturesFive thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0Tool design allows for effortless retrieval of damping rod after spring installationRod includes downward-facing bleed port to...

Motion PRO #08-0649 - Spark Plug Socket - Pro - 16 mm/5/8"

Can be used as an axle holding tool on bikes with 17 mm or 19 mm internal hex axles. Through hole allows use of screwdriver or holding rod. Will fit 5/8" spark plugs.FeaturesUse with a 3/8" square drive or 17 mm wrenchInnovative internal plug...

Motion PRO #08-0650 - Spark Plug Socket - Pro - 18 mm/11/16"

Can be used as an axle holding tool on bikes with 17 mm or 22 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm wrenchInnovative internal plug retention systemEasy to read...

Motion PRO #08-0651 - Compression Tester Tool

Compression Tester ToolFeaturesHelps to quickly and easily inspect engine compression on both 2-stroke and 4-stroke enginesRedesigned and Improved billet gauge manifold with integrated pressure release valveEasy to read precision 0-300 psi analog gauge...

Motion PRO #08-0652 - Pick Up Tool - Magnetic

Pick Up Tool - MagneticFeaturesProtective rubber coating won't scratch aluminum or plastic surfacesBendable housing retains its shape to access hard-to-reach areasLow profile tip fits in tight spacesSpecsRiding StyleStreetColor/FinishBlueMaterialBillet...

Motion PRO #08-0653 - Spark Plug Socket - Pro - 21 mm/13/16"

Can be used as an axle holding tool on bikes with 17 mm or 24 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm wrenchInnovative internal plug retention systemEasy to read...

Motion PRO #08-0655 - Swivel Extension Tool - 3/8"

Swivel Extension Tool - 3/8"FeaturesVersatile swivel extension can be turned with a Phillips screwdriver, 1/4" ratchet or driver, or 14 mm wrench or socketIdeal for use with spark plug sockets to access hard to reach spark plugsSwivel feature...

Motion PRO #08-0656 - Wrench - Fork Cap - 46 mm/50 mm

Wrench - Fork Cap - 46 mm/50 mmFeaturesFor removing the caps on Showa MX forksOne end is 46 mm, and the other end is 50 mmCan be used for removal of the compression stack6061 aluminum material is non-marring on fork capsCNC machined for precise fit and...