Tools

Jims #34734-80 - Main Drive Gear Bearing/Seal Installer Tool - 5-Speed

Use to install both bearings and the seal on the clutch side.FeaturesHolds bearings and seal square to its bore, eliminating any marringInstall both bearings and seal with use of a one-ton pressInstall bearings and seal to correct depthMade in the...

Jims #34740-84 - Valve Guide Remover

Valve Guide RemoverFeaturesAvailable from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve sealsMade in the U.S.A.SpecsTypeDriverProduct NameValve Guide RemoverColor/FinishBlackApplicationValve GuideRiding...

Jims #34761-84 - Clutch Spring Tool - XL '84-'90

Clutch Spring Tool - XL '84-'90FeaturesUse to release the clutch spring tension for disassemblyMade in the U.S.A.SpecsApplicationClutchProduct NameSpring TensionerRiding StyleStreetUnitsEachColor/FinishBlack

Jims #34902-84 - Mainshaft Bearing Race Tool - Big Twin

Mainshaft Bearing Race Tool - Big TwinFeaturesUsed to remove and install the inner bearing race on the transmission mainshaftMade in the U.S.A.SpecsApplicationTransmissionRiding StyleStreetUnitsEachProduct NameBearing ToolTypeBearing...

Jims #34902-84-3 - Puller Plate - Replacement

Puller Plate - ReplacementFeaturesReplacement puller plate for Jim's mainshaft bearing race toolMade in the USASpecsUnitsEachRiding StyleStreetTypeReplacementColor/FinishBlackProduct NamePuller Plate

Jims #35316-80 - Main Drive Gear Tool - 5-Speed

Main Drive Gear Tool - 5-SpeedFeaturesInstalls the main drive gear without removing the transmissionUsed to remove and install the main drive gearMade in the USASpecsProduct NameMain Drive Gear ToolType5-SpeedColor/FinishBlackRiding StyleStreetUnitsEach

Jims #38515-90 - Tool - Clutch Spring Compressor

Tool - Clutch Spring CompressorFeaturesUsed to release clutch spring so retainer ring can be easily removed and installedMade in the USASpecsColor/FinishBlueProduct NameToolUnitsEachRiding StyleStreetTypeClutch Spring Compressor

Jims #38515-91 - Nut - Clutch Spring Compressor

Nut - Clutch Spring CompressorFeaturesUsed to release clutch spring so retainer ring can be easily removed and installedMade in the USAFor '91-'03 XL applications, compressor nut Part# DS-197061 must be used in conjunction with compressor tool Part#...

Jims #39361-69 - Seal Installation Tool - Sprocket Shaft

Seal Installation Tool - Sprocket ShaftFeaturesDesigned to press oil seal over sprocket shaft into caseMade in the U.S.A.SpecsUnitsEachColor/FinishBlackRiding StyleStreetApplicationSprocket ShaftProduct NameSeal Installer

Jims #5502 - Tool - Clutch Adjustment - Ultimate

Tool - Clutch Adjustment - UltimateFeaturesAllows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change positionIncludes the proper hex key Allen wrench, which conveniently stores in the tool handleMade...

Jims #5504 - Tappet Position Holder

Tappet Position HolderFeaturesTappet locations are clearly referenced on the tool, which also serves to protect the tappets from damage when removed from the engineSafely stores anti-rotation pins and tappets for proper and accurate installationMade in...

Jims #5506 - Magnetic Tappet Holder - Twin Cam and M8

Magnetic Tappet Holder - Twin Cam and M8FeaturesNever turn the engine over if the tappet will not spin with your fingers after adjustments were madeIt is very important that the engine is not rotated while pushrods are tightThe pushrod will spin with...

Jims #5512 - Bushing - Shifter Shaft/Removal/Installation - M8

Bushing - Shifter Shaft/Removal/Installation - M8FeaturesDesigned to remove old bushing and install new shifter shaft bushing to proper depthIncludes new installation driver with a receiver cup and unique knurled driverMakes bushing removal quick and...

Jims #5515 - Neck Bearing Tool

Neck Bearing ToolFeaturesTool has tapered drivers that ensure the correct installed alignment and depth of steering stem racesEliminates the risk of damaging the races and bearings during installationMade in the U.S.A...

Jims #5516 - Socket Tool - Sprocket Nut/Removal/Installation - Sportster

Socket Tool - Sprocket Nut/Removal/Installation - SportsterFeaturesEnsures the mainshaft on Harley-Davidson® Sportster models extends through the guidance collar for correct alignmentShort socket is specifically designed to remove, install and properly...

Jims #5517 - Shifter Mechanism Sleeve Tool - Removal/Installation

Shifter Mechanism Sleeve Tool - Removal/InstallationFeaturesA real time saver for removing and installing the shifter mechanism sleeve in cruise drive Big Twin transmissionsTool allows you to remove and install the sleeve (bushing) without having to...

Jims #5518 - Bushing Tool - Shifter Shaft

Bushing Tool - Shifter ShaftFeaturesTime-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove he inner primaryTools installs new bushings to the correct locationMade in the USAFor touring models with 5- or 6-speed...

Jims #5520 - Primary Locking Bar - XL

Primary Locking Bar - XLFeaturesImmobilizes primary driveAllows for tightening with a torque wrench or loosening with a breaker barPrevents damage to rotor or magnets sometimes caused by air-wrenchMade in the U.S.A.SpecsColor/FinishBlackRiding...

Jims #5530 - Fuel Tank - Remote

Fuel Tank - RemoteFeaturesTank is completely mobile, even when pressurized; canister does not need to be continuously connected to the air supplySmall enough to hang from a handlebar, be attached to a wall mount, work bench or rollaway tool chestTank...

Jims #5532 - Tappet - Vacuum

Tappet - VacuumFeaturesRemoves the risk of using the starting system to pump up the lifters or damage to the valve train at low rpm if the lifters are not fully bledSpecial jar, designed for vacuum, holds up to four hydraulic lifters in a convenient...

Jims #5534 - Socket - Compensator Bolt Driver - Torx

Socket - Compensator Bolt Driver - TorxFeaturesCorrect-style driver/socket for the compensating sprocket retaining fastenerMade in the USAFor use with Jim's part# 10500031 compensator bolt.SpecsStyleTorxUnitsEachTypeCompensator Bolt...

Jims #5800 - Flywheel Puller Tool - Indian

Flywheel Puller Tool - IndianFeaturesEliminates potential damage to the flywheel when used in this applicationEnsures good and solid engagement when using the pullerMade in the U.S.A.SpecsRiding StyleStreetApplicationFlywheelProduct...

Jims #5804 - Adapter - Clutch Spring Compressor - Victory

Adapter - Clutch Spring Compressor - VictoryFeaturesMade in the USATo be used with clutch spring compressor Part# DS-197060.SpecsRiding StyleStreetProduct NameAdapterFor MakeVictoryColor/FinishAnodizedMaterialAluminumTypeClutch Spring CompressorUnitsEach

Jims #5805 - Wrist Pin Remover Tool - M8

Wrist Pin Remover Tool - M8FeaturesQuickly and easily removes wrist pins from Milwaukee-Eight® enginesAdapter part for JIMS® Wrist Pin Tool (PART# DS-196197)Made in the U.S.A.SpecsColor/FinishGrayProduct NameAdapterRiding StyleStreetUnitsEachTypeRemoval...