Bottom End

Andrews #216324 - Cam Sprocket

Cam SprocketFeaturesMade in the U.S.A.SpecsRiding StyleStreetProduct NameCamshaft

Andrews #216326 - Cam Set - 26H - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection...

Andrews #216326G - Cam Set - 26HG - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection...

Andrews #216331 - Cam Set - 31H - Chain Drive - Twin Cam

Great cam for motors with 95+" and 10.0:1 compression ratio.Lower TDC lift means easy installationSimilar to 37G but different timing (2000-5800 rpm power range).Can be used with stock springs and...

Andrews #216332 - Cam Set - 32H - Chain Drive - Twin Cam

High-lift version of 31G with 20% more power for 10.0:1+ compression ratio with 2800-5800 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel...

Andrews #216337 - Cam Set - 37H - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection...

Andrews #216348 - Cam Set - 48H - Chain Drive - Twin Cam

Duration @ 0.053": Intake 222° | Exhaust 238°.Duration @ 0.020": Intake 257° | Exhaust 273°.FeaturesBroad tip cams for baggers with stock motors; max torque at low and mid rpm rangesManufactured with...

Andrews #216354 - Cam Set - 54H - Chain Drive - Twin Cam

Designed for 96" and 103" motors that go up to a 10.0:1 compression ratio with 2200-5600 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel...

Andrews #216355G - Cam Set - 55HG - Gear Drive - Twin Cam

Cams for maximum torque and horsepower at higher rpm ranges (2600-6000+ rpm).Designed for engines with 9.5:1 compression ratio or higher with 88"-95".Coil bind must be checked, but stock tappets can...

Andrews #216357 - Cam Set - 57H - Chain Drive - Twin Cam

Bolt-in broad tip cams for 96" and 103" Limited models and 110" CVO motors.Cams work best at 2200 - 5600 rpm.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from...

Andrews #216359G - Cam Set - 59HG - Gear Drive - Twin Cam

For 95"+ motors with 10:1 compression ratio or higher.Maximum torque and HP at middle and upper rpm ranges (2400-6200 rpm).Coil bind must be checked but can use stock tappets.FeaturesManufactured...

Andrews #216812 - Conversion Camshaft

Bolt-in cams with the same output as the stock cams.Slight power increase when compared to stock.No returning of the stock system is necessary.Can be used with stock valve springs and tappets...

Andrews #216821 - Conversion Camshaft

Bolt-in cams with more torque at low and middle range 1700 - 4800 rpm.Similar to EV23 for heavy bikes.Ideal for heavy bikes with stock compression ratios and stock pistons.Can be used with stock...

Andrews #216826 - Conversion Camshaft

Bolt-in cams for low rpm torque and two-up touring.Add more torque and horsepower at low and middle range of 1800 - 5200 rpm.Can be used with stock valve springs and tappets.FeaturesAllows upgrade of...

Andrews #216837 - Conversion Camshaft

Bolt-in cams for 88" or 95" motors.Smooth idle, broad torque band.Run best with low-restriction exhaust with 2200 - 5800 rpm range.Can be used with stock valve springs.FeaturesAllows upgrade of the...