Oil Pumps & Cam Plates

Feuling Parts #7097 - Race Series® Oil System Kit - Oil Cooled - M8

Block-off plate PART #0932-0036 required when using gear drive cams.FeaturesIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplatesIncreases oil flow and volume by...

Feuling Parts #7097ST - Race Series® Oil System Kit - Oil Cooled - M8

Block-off plate PART #0932-0036 required when using gear drive cams.Use with short-travel pushrods PART #0928-0114 on stock base circle camshafts with Feuling short-travel lifters (includes Feuling grinds 405, 465, 472, 508, 521 and 592).FeaturesIncludes...

Feuling Parts #7098 - Oil System - HP+® - Water Cooled - M8

30% more pressure gear volume over stock and 53% more scavenge gear volume over stock.FeaturesIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplatesIncreases oil...

Feuling Parts #7099 - Race Series® Oil System Kit - Water Cooled - M8

Block-off plate PART #0932-0036 required when using gear drive cams.FeaturesIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplatesIncreases oil flow and volume by...

Feuling Parts #7099ST - Race Series® Oil System Kit - Water Cooled - M8

Block-off plate PART #0932-0036 required when using gear drive cams.Use with short-travel pushrods PART #0928-0114 on stock base circle camshafts with Feuling short-travel lifters (includes Feuling grinds 405, 465, 472, 508, 521 and 592).FeaturesIncludes...

Feuling Parts #7196 - Oil Pump with Cam Plate - HP+® - Oil Cooled - M8

Has 27% more pressure and scavenge gear volume over stock, 42% more scavenge volume through port sizing, matched passages and holes to the engine case and 68% more oil volume to the crankshaft and connecting rod bearing.FeaturesIncrease oil pressure, oil...

Feuling Parts #7197 - Race Series Oil Pump with Plate - Oil Cooled Motors - '17-'24 M8

Has 27% more pressure and scavenge gear volume over stock, 42% more scavenge volume through port sizing, matched passages and holes to the engine case and 68% more oil volume to the crankshaft and connecting rod bearing.FeaturesIncrease oil pressure, oil...

Feuling Parts #7198 - Oil Pump with Cam Plate - HP+® - Water Cooled - M8

Has 30% more pressure gear volume over stock, 53% more scavenge gear volume over stock and 42% more scavenge volume with port sizing, matched passages and holes to the engine case.FeaturesIncrease oil pressure, oil volume, engine oil flow and return oil...

Feuling Parts #7199 - Race Series Oil Pump with Plate - Twin Cooled Motors - '17-'24 M8

Has 30% more pressure gear volume over stock, 53% more scavenge gear volume over stock and 42% more scavenge volume with port sizing, matched passages and holes to the engine case.FeaturesIncrease oil pressure, oil volume, engine oil flow and return oil...

Feuling Parts #7474 - HP+® Oiling System/Camchest Kit - Twin Cam '07-'17 | Dyna '06

Kit Includes:• HP+® High Volume Oil Pump• High Flow Camplate• HP+® Lifters• Billet Tensioner Housings• Tensioner Pads• Cam/Crank Sprockets• Sprocket Alignment Spacers• Cam Chains• Cam Bearings• Gaskets• Hardware• O-ringsFeaturesFreshen up camchest and...

Feuling Parts #7475 - Race Series® Camchest Kit

Race Series® Camchest KitFeaturesFreshen up camchest and oiling system on late model Twin Cam enginesKit uses existing camshafts or allows purchase of preferred cam selection while upgrading camchest Seats & Sissy Bars with a new Race Series high...

Feuling Parts #8000 - High Flow Camplate - Gear Drive - Twin Cam (except '06 Dyna)

Camplates for '99-'06 Twin Cam (except 06 Dyna) have tighter cam bearing bore tolerances for improved press fit.Requires the use of '99-'06 style Feuling HP+ or Race Series oil pump.Not for '06 Dyna.FeaturesCamplate matches the oil portholes throughout...

Feuling Parts #8004 - Pressure Relief Valve Plunger - M8 uses Factory or Fueling oil pumps

Pressure relief valve plunger fits all Twin Cam camplates including factory, Screamin' Eagle, FEULING® and others (will also work with M-Eight oil pumps).FeaturesIncreases pressure relief valve pop-off psiCam plate pressure relief valve plunger is...

Feuling Parts #8010 - High Flow Camplate - Chain Drive - Twin Cam

Camplates for '99-'06 Twin Cam (except 06 Dyna) have tighter cam bearing bore tolerances for improved press fit.Requires the use of '99-'06 style Feuling HP+ or Race Series oil pump.Includes tensioner pins and guide hardware.Camplate is designed to use...

Feuling Parts #8011 - High Flow Camplate - Hydraulic Tensioner Conversion - Chain Drive - Twin Cam

Camplates for '99-'06 Twin Cam (except '06 Dyna) have tighter bearing bore tolerances for improved press fit.Requires '07-'17 hydraulic chain drive system (tensioners, chains, sprockets and hardware).Not for '06 Dyna.FeaturesCamplate matches the oil...