Top End

Feuling Parts #1107 - Valve Spring Kit - without TI Retainers - M8

Uses factory stock steel retainers.FeaturesDirect bolt-in replacements, no machining or rocker box clearancing requiredMachined from premiun-grade high tensile chrome silicon single-conical ovate...

Feuling Parts #1108 - Valve Spring Kit - with TI Retainers - M8

Valve Spring Kit - with TI Retainers - M8FeaturesDirect bolt-in replacements, no machining or rocker box clearancing requiredMachined from premiun-grade high tensile chrome silicon single-conical...

Feuling Parts #1120 - Valve Spring Kit - Steel Retainers - 5/16" Valve Stem - EVO | Twin Cam

Valve Spring Kit - Steel Retainers - 5/16" Valve Stem - EVO | Twin CamFeaturesMade from heat treated chromoly conical ovate wireHand measured and labeled specifically based on their coil bing /...

Feuling Parts #1121 - Valve Spring Kit - Steel Retainers - For 7.00 mm Valve Stem - Twin Cam

Valve Spring Kit - Steel Retainers - For 7.00 mm Valve Stem - Twin CamFeaturesMade from heat treated chromoly conical ovate wireHand measured and labeled specifically based on their coil bing /...

Feuling Parts #1123 - Valve Spring Kit - TI Retainers - For 7.00 mm Valve Stem - Twin Cam

Valve Spring Kit - TI Retainers - For 7.00 mm Valve Stem - Twin CamFeaturesMade from heat treated chromoly conical ovate wireHand measured and labeled specifically based on their coil bing / required...

Feuling Parts #1200 - Valve Spring Kit - High Load Beehive® with TI Retainers - Evo/Twin Cam | XL | Buell

For '99-'04 Twin Cam and '86-'03 XL with 10°, standard 5/16" valve stem and keeper groove.Kit Includes:• 200+ lb Springs• Titanium Retainers• Seats• Seals• Keepers• Seat ShimsFeaturesMade from...

Feuling Parts #1201 - Valve Spring Kit - High Load Beehive® with TI Retainers - TC with SE Heads

Fits Twin Cam Screamin' Eagle heads with 5/16" valve stems with standard keeper grooves and 0.530" diameter valve guides.Kit Includes:• 4x Springs• 4x Valve Seals• 4x Top Spring Retainers• 4x Bottom...

Feuling Parts #1205 - Valve Spring Kit - High Load Beehive® with TI Retainers - Twin Cam | XL | XR

For '05-'17 88"/96"/103" Twin Cam, '04-'22 XL (except RH Sportster), '09-'12 XR1200 with 7°, 7.00 mm valve stem with stock triple keeper groove.Kit Includes:• 200+ lb Springs• Titanium Retainers•...

Feuling Parts #1206 - Valve Locks - Offset 0.050" - Twin Cam

Offset 10° for 5/16" valve stems.Raises the valve spring retainer to gain 0.050" of installed height without machining the cylinder head spring seat.Will lower valve spring pressure.Will also fit...

Feuling Parts #1207 - Valve Spring Kit - High Load Beehive with TI Retainers - M8

Valve Spring Kit - High Load Beehive with TI Retainers - M8FeaturesMachined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal...

Feuling Parts #1212 - Valve Locks - Standard Replacement - Buell | Twin Cam | XL

Steel valve locks standard height groove 5/16" valve stems, 7° with square groove.Stock replacement for '84-'04 Evolution and Twin Cam and '86-'03 XL.FeaturesSecures an engine's valve retainer to the...

Feuling Parts #1213 - Valve Locks - 7.00 mm Triple Groove - Twin Cam

Steel valve locks standard height for 7.00 mm valve stems.Stock replacement.FeaturesSecures an engine's valve retainer to the valve stem, preventing the valve from dropping in the cylinder and...

Feuling Parts #1215 - Valve Locks - 6.00 mm Triple Groove - M8

Standard height stock replacement 6.00 mm valve stem triple groove keepers.Fits Feuling and factory O.E.M. retainers and spring kits.FeaturesSecures an engine's valve retainer to the valve stem,...

Feuling Parts #1217 - Valve Spring Seat Shims - 0.060"/0.030"/0.015" - Big Twin | Twin Cam | XL | Buell

Includes:• 4x 0.060" Thickness Shims• 4x 0.030" Thickness Shims• 4x 0.015" Thickness ShimsFeaturesSet valve spring open height to match camshaft lifts for optimum valve-train stability and...

Feuling Parts #1218 - Valve Spring Seat Shims - M8

Valve Spring Seat Shims - M8FeaturesSet valve spring open height to match camshaft lifts for optimum valve-train stability and performanceIncludes eight 0.060" thick shims, eight 0.030" thick shims,...