Feuling Parts

Feuling #4100 - Anti-Rotation Lifter Pins

Anti-Rotation Lifter Pins A max clearance of 0.002" - 0.003" between lifter and anti-rotation pin is recommended Excessive clearance will create excessive noise

Feuling #4083 - HP+ Pushrods

HP+ One Piece Pushrods Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic...

Feuling #4082 - HP+ Pushrods

HP+ One Piece Pushrods Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic...

Feuling #1237 - Gorilla Rocker Shaft and Bolt Kit

Gorilla Rocker Shafts and Bolt Kit Gas nitrided and final surface treated Kit includes the shafts and our ARP bolts Recommended for all Twin Cam engines and especially for engines running higher lift...

Feuling #1236 - Gorilla Rocker Shaft and Bolt Kit

Gorilla Rocker Shafts and Bolt Kit Gas nitrided and final surface treated Kit includes the shafts and our ARP bolts Recommended for all Twin Cam engines and especially for engines running higher lift...

Feuling #1235 - Gorilla Rocker Shafts

Gorilla Rocker Shafts Gas nitrided and final surface treated Over double the strength of factory rocker shafts Recommended for all Twin Cam engines and especially for engines running higher lift...

Feuling #1392 - Cam - 574 Series

Reaper 574 Cam Requires performance valve springs Performance lifters recommended but not required Will work with factory pushrods on engines with factory stack up If deck height, cylinders or rocker...

Feuling #9011 - Gasket - Replacement/Camplate Tool

Replacement Camplate Tool Gasket Replacement gasket for Feuling tool part# 9010

Feuling #9009 - Air Regulator - Replacement/Camplate Tool

Replacement Air Regulator for Pressure Relief Testing Tool Replacement parts for the Feuling­ pressure relief psi testing tool (PART# 3801-0071) 1/8" NPT (National Pipe Tapered) fitting 1/4" NPT air...

Feuling #9006 - Pressure Test Tool - Oil Pump - M8

M8 Oil Pump PSI Tester Includes air regulator, 0 - 100 psi pressure gauge, plugs for water and oil cooled oil pumps, gasket and needed hardware The spring tension can be adjusted to achieve the...

Feuling #9004 - Measuring Balls - No Go/Lifter Bore - Kit

Measuring Balls for No Go Lifter Bore Kit Designed to accurately measure lifter bore diameter and bore roundness Includes ball sizes; 0.8430", 0.8435", 0.8440", and 0.8450" Made in the USA Feuling...

Feuling #8990 - Engine Stand - M8

Milwaukee Eight Engine Stand Stand also features three holes for bench mounting Made in the USA Uses single factory engine mount bolt on front and 2 rear engine mount bolts to attach engine to frame...

Feuling #9024 - Pilot - Seat Cutter/Valve Guide - 6 mm - M8

Pilot Seat Cutter for M8 Machine valve spring seats for proper installed spring height and spring cup fitment Cutter bodies and pilots are interchangeable Hardened pilots fit all 3/8 and hand drills...

Feuling #9016 - Dial Indicator - Replacement - Universal

Universal Replacement Dial Indicator Universal replacement dial indicator Fits Feuling tool part# 9015.

Feuling #9014 - Crankshaft Runout Measuring Tool - M8

M8 Crankshaft Runout Measuring Tool Mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam cover bolt...

Feuling #9001 - Roll Pin Tool - Oil Pump - Removal/Installation - M8

M8 Oil Pump Roll Pin Remover/Installer Tool Makes for easy removal and installation of the roll pin in the M8 oil pump Made in the USA

Feuling #9023 - Seat Cutter - Valve Spring - M8

Valve Spring Seat Cutter Machine valve spring seats for proper installed spring height and spring cup fitment Hardened pilots fit all 3/8" and 1/2" hand drills Cutter bodies and pilots are...

Feuling #9015 - Crankshaft Runout Measuring Tool - Twin Cam/EVO

Twin Cam/Evo Crankshaft Runout Measuring Tool Mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam...

Feuling #9012 - Holding Tool - Pushrod Tube

Pushrod Tube Holder Makes for easy adjustment of adjustable pushrods, holding pushrod tubes up and out of the way Made in the USA Fits EVO, TC and most aftermarket tubes.

Feuling #9008 - Reamer Tool - Camplate/Oil Pump - Twin Cam/M8

Reamer for Camplate/Oil Pump Tool To use, lightly machine (clean) the camplate relief valve seat and re-seat the plunger valve Best used in conjunction with Feuling pressure test tool part# 9010 or...

Feuling #9010 - Camplate Tool - PSI Relief Valve - Twin Cam

Camplate Tool Allows the engine builder to know what psi the relief valve opens; the spring tension can be adjusted to achieve the desired pop off psi Tool includes: Air regulator 0-100 psi pressure...

Feuling #9000 - Roll Pin Tool - Camplate - Removal/Installation - Twin Cam

Camplate Roll Pin Removal/Installation Tool For easy removal and installation of pressure relief spring, by-pass valve and roll pin Holds relief spring down and away from roll pin Made in the USA

Feuling #1231 - Rocker Shafts - Set - M8

Gorilla Rocker Shaft and Stud Kit Custom tooling was created to provide a countersink relief for the bolt/nut head versus machining away the entire end of the shaft per the factory design Recommended...

Feuling #1232 - Rocker Shafts/Studs/Nuts - Kit - M8

Gorilla Rocker Shaft and Stud Kit Custom tooling was created to provide a countersink relief for the bolt/nut head versus machining away the entire end of the shaft per the factory design Recommended...