Frame & Suspension

Race Tech #SRSP 55245 - Front/Rear Spring - Blue - Sport Series - Spring Rate 280 lbs/in

Accurate to within 0.05 kg/mm Made of the finest chrome silicon wire Shot-peened, heat-treated and preset (no sacking) Outstanding stiffness-to-mass ratio

Race Tech #TFHP 01 - Fork Holding Tool

Fork Holding ToolFeaturesMakes disassembly and assembly easier by holding cartridge rod while bottom nut is loosened or tightenedAllows you to more easily service Showa Twin- ChamberSpecsMaterialPlasticProduct NameHolding...

Race Tech #TFOL 02 - Fork Oil Level Tool - Professional

Fork Oil Level Tool - ProfessionalFeaturesCollapsible stainless steel tube has etched measurement increments for easy, accurate fork oil level readingsSame easy-to-use qualities as Race Tech® standard fork oil level tool in a durable, professional...

Race Tech #TFSC 01 - Compressor - Fork Spring

Compressor - Fork SpringFeaturesAdapter is recommended for disassembly of Harley-Davidson® cartridge forksRelieves spring pressure for taking off fork tube caps without damaging threadsInnovative design allows you to use the tool with forks on or off the...

Race Tech #TFSD 37 - Driver - Fork Seal - 37/36 mm

Driver - Fork Seal - 37/36 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecsColor/FinishZincProduct NameSeal DriverApplicationForkRiding StyleAdventure Touring / Dual-SportFork Tube Diameter37...

Race Tech #TFSD 39 - Driver - Fork Seal - 39/38 mm

Driver - Fork Seal - 39/38 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecsRiding StyleOff-RoadUnitsEachProduct NameSeal DriverStyleSplitApplicationForkFork Tube Diameter38...

Race Tech #TFSD 41 - Driver - Fork Seal - 41/40 mm

Driver - Fork Seal - 41/40 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecsProduct NameSeal DriverRiding StyleOff-RoadStyleSplitFork Tube Diameter41...

Race Tech #TFSD 43 - Driver - Fork Seal - Split - 43 mm

Driver - Fork Seal - Split - 43 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecsColor/FinishZincFork Tube Diameter43 mmRiding StyleAdventure Touring /...

Race Tech #TFSD 48 - Driver - Fork Seal - 48/47 mm

Driver - Fork Seal - 48/47 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecsStyleSplitTypeInvertedApplicationForkColor/FinishZincProduct NameSeal DriverFork Tube Diameter47 mmRiding...

Race Tech #TFSD 50 - Driver - Fork Seal - 50/49 mm

Driver - Fork Seal - 50/49 mmFeaturesSplit fork seal drivers save headaches and sealsFit both inverted and conventional forksSpecsApplicationForkFork Tube Diameter50 mmTypeInvertedRiding StyleAdventure Touring / Dual-SportStyleSplitProduct NameSeal...

Race Tech #TFSH 10 - Shaft Holding Tool - 10-14 mm

Shaft Holding Tool - 10-14 mmFeaturesA must for all suspension workHolds fork damping rods, cartridges, shock shaftsUnique design allows installation of dowels into the top of the vise jawsThe holding tools hang on the dowels instead of dropping on the...

Race Tech #TFSH 14 - Shaft Holding Tool - 14-18 mm

Shaft Holding Tool - 14-18 mmFeaturesA must for all suspension workHolds fork damping rods, cartridges, shock shaftsUnique design allows installation of dowels into the top of the vise jawsThe holding tools hang on the dowels instead of dropping on the...

Race Tech #TFSH 20 - Shaft Holding Tool - 20-29 mm

Shaft Holding Tool - 20-29 mmFeaturesA must for all suspension workHolds fork damping rods, cartridges, shock shaftsUnique design allows installation of dowels into the top of the vise jawsThe holding tools hang on the dowels instead of dropping on the...

Race Tech #TFSH 32 - Shaft Holding Tool - 32-35 mm

Shaft Holding Tool - 32-35 mmFeaturesA must for all suspension workHolds fork damping rods, cartridges, shock shaftsUnique design allows installation of dowels into the top of the vise jawsThe holding tools hang on the dowels instead of dropping on the...

Race Tech #TSBD SET - Shock Bearing Driver Set

Shock Bearing Driver SetFeaturesWorks with all OEM shocks with 12.5 mm, 14 mm, 16 mm and 18 mm shaftsComes with 12.5 mm, 14 mm. 16 mm, and 18 mm bushing driversFor easy installation of shock shaft bushings into seal headsPerfect for use with Race Tech...