Motion Pro

Motion PRO #08-0686 - Flywheel Puller - Internal Thread with Protector - M28 x 1.0

Flywheel Puller - Internal Thread with Protector - M28 x 1.0FeaturesUsed for removal of the flywheel or rotor if applicableLaser etched with Motion Pro logo and part numberHeat treated for strength...

Motion PRO #08-0655 - Swivel Extension Tool - 3/8"

Swivel Extension Tool - 3/8"FeaturesVersatile swivel extension can be turned with a Phillips screwdriver, 1/4" ratchet or driver, or 14 mm wrench or socketIdeal for use with spark plug...

Motion PRO #08-0653 - Spark Plug Socket - Pro - 21 mm/13/16"

Can be used as an axle holding tool on bikes with 17 mm or 24 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm...

Motion PRO #08-0650 - Spark Plug Socket - Pro - 18 mm/11/16"

Can be used as an axle holding tool on bikes with 17 mm or 22 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm...

Motion PRO #08-0649 - Spark Plug Socket - Pro - 16 mm/5/8"

Can be used as an axle holding tool on bikes with 17 mm or 19 mm internal hex axles. Through hole allows use of screwdriver or holding rod. Will fit 5/8" spark plugs.FeaturesUse with a 3/8"...

Motion PRO #08-0641 - Valve Spring Compressor - 24 mm

Valve Spring Compressor - 24 mmFeaturesQuick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valvesWorks on all...

Motion PRO #08-0636 - Counter/Shaft Seal Puller

Counter/Shaft Seal PullerFeaturesUnique expansion mechanism ensures seal is pulled straight and will not damage engine cases during extractionSafely removes countershaft seals with an inner diameter...

Motion PRO #08-0631 - Crankshaft Puller

Crankshaft PullerFeatures25 mm and 40 mm face plate adapters ensure the crankshaft is pulled perfectly straight into bearingsPrecision tool used to install press-in crankshafts in an engine...

Motion PRO #08-0600 - Flywheel/Rotor Puller - Crankshaft - Internal Thread - M40 x 1.5

Flywheel/Rotor Puller - Crankshaft - Internal Thread - M40 x 1.5FeaturesRotor remover bolt screws into crankshaft to protect crankshaft while rotor remover is used to remove rotorLaser etched with...

Motion PRO #08-0535 - Flywheel Puller - Internal Thread with Protector - M26 x 1.0

Flywheel Puller - Internal Thread with Protector - M26 x 1.0FeaturesUsed for removal of the flywheel or rotor if applicableLaser etched with Motion Pro logo and part numberHeat treated for strength...

Motion PRO #08-0532 - Bearing Removal Tool - Wheel - 22 mm

Bearing Removal Tool - Wheel - 22 mmFeaturesHeat treated for durability and long service lifeSpecsMeasurement SystemMetricUnitsEachStyleSplit ColletRiding StyleStreetColor/FinishBlackDrive Size22...

Motion PRO #08-0511 - Valve Stem Seal Tool - Installation - Set

Valve Stem Seal Tool - Installation - SetFeaturesSet of 4 includes three common sizes for use on most modern street bikes, 4 mm, 4.5 mm & 5 mm and one additional 5 mm specially designed for the...

Motion PRO #08-0509 - Valve Stem Seal Tool - Installation - 5 mm

Valve Stem Seal Tool - Installation - 5 mmFeaturesContoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy...

Motion PRO #08-0508 - Valve Stem Seal Tool - Installation - 4.5 mm

Valve Stem Seal Tool - Installation - 4.5 mmFeaturesContoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy...

Motion PRO #08-0507 - Valve Stem Seal Tool - Installation - 4 mm

Valve Stem Seal Tool - Installation - 4 mmFeaturesContoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy...