Engine

Feuling Parts #7076 - HP+® Performance Oil System Conversion Cam Plate

For '99-'06 Twin Cam with Chain Drive (except '06 Dyna) ConversionCamplates Upgrade to '07-'17 Hydraulic Tensioners.Conversion camplates use '99-'06 style camshafts; oil system pack requires separate purchase of hydraulic chain drive tensioners, chains,...

Feuling Parts #7077ST - Race Series® Conversion Camplate Oil System - Twin Cam

Use with short-travel pushrods PART #0928-0116 on stock base circlecamshafts (Feuling 525, 543 and 574 grinds) and PART #0928-0117 on small base circle camshafts (Feuling 594 and 630 grinds).Conversion camplates use '99-'06 style camshafts; oil system...

Feuling Parts #7078 - Chain Drive Conversion Kit - Twin Cam

Chain Drive Conversion Kit - Twin CamFeaturesChain drive conversion kit for '99-'06 Twin Cam with gear driven cams except '06 dynaMade in the USAFor use with PART #0932-0027 when using '99-'06 chain drive system.SpecsProduct NameConversion KitStyleChain...

Feuling Parts #7080 - Gear Oil System - OE+ - Twin Cam

Gear Oil System - OE+ - Twin CamFeaturesUpgrade to the stock oiling system, delivering increased oil pressure and return scavenging volumes from billet oil pump and matched camplateCamplate pressure relief valve and spring are seated, sealed and pre-set...

Feuling Parts #7081 - Chain Oil System - OE+ - Twin Cam

Kit uses the OE style spring tensioners. See 0932-0094 for hydraulic tensioners.For chain drive cams with mechanical tensioner.FeaturesUpgrade to the stock oiling system, delivering increased oil pressure and return scavenging volumes from billet oil...

Feuling Parts #7084 - Chain/Gear Oil System - OE+ - Twin Cam

Block-off plate PART #0932-0036 required when using gear drive cam.FeaturesUpgrade to the stock oiling system, delivering increased oil pressure and return scavenging volumes from billet oil pump and matched camplateCamplate pressure relief valve and...

Feuling Parts #7086 - Conversion Oil System - OE+ - Twin Cam

Requires hydraulic cam chain drive system (tensioners, chains, sprocketsand hardware),see Feuling tensioner kit PART #s 0925-1069 or 0925-1070.Hydraulic tensioner conversion camplate for stock chain drive cams.Conversion camplate system uses the original...

Feuling Parts #7087 - Conversion Camshaft Hydraulic Tensioner Kit - Twin Cam with Cam Position Sensor

Fits '99-'00 Twin Cam and '01 EFI Touring engines with cam position sensor.Includes:• OE+ Billet Oil Pump• Camplate• Billet hydraulic tensioner housings• Tensioner Pads• Cam Chains• Sprockets• Sprocket Alignment Spacers• Timken/Feuling Bearings• Gaskets•...

Feuling Parts #7088 - Conversion Camshaft Hydraulic Tensioner Kit - Twin Cam w/o Cam Postion Sensor

Fits 01-'06 Twin Cam engines (except '01 EFI Touring, '06 Dyna) without cam position sensor.Includes:• OE+ Billet Oil Pump• Camplate• Billet hydraulic tensioner housings• Tensioner Pads• Cam Chains• Sprockets• Sprocket Alignment Spacers• Timken/Feuling...

Feuling Parts #7089 - Conversion Camplate Hydraulic Cam Chain Tensioner - Factory Style - Twin Cam with Cam Sensor

Fits '99-'00 Twin Cam and '01 EFI Touring with cam position sensor.Includes:• OE+ Billet Oil Pump• Camplate• Billet Hydraulic Tensioner Housings• Tensioner Pads• Cam Chains• Sprockets• Sprocket Alignment Spacers• Timken/Feuling Bearings• Gaskets•...

Feuling Parts #7090 - Conversion Camplate Hydraulic Cam Chain Tensioner - Factory Style - Twin Cam w/o Cam Sensor

Fits '01-'06 Twin Cam engines (except '01 EFI Touring, '06 Dyna) without cam position sensor.Includes:• OE+ Billet Oil Pump• Camplate• Billet Hydraulic Tensioner Housings• Tensioner Pads• Cam Chains• Sprockets• Sprocket Alignment Spacers• Timken/Feuling...

Feuling Parts #7096 - Oil System - HP+® - Oil Cooled - M8

27% more pressure and scavenge gear volume over stock.FeaturesIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplatesIncreases oil flow and volume by enlarging the...

Feuling Parts #7097 - Race Series® Oil System Kit - Oil Cooled - M8

Block-off plate PART #0932-0036 required when using gear drive cams.FeaturesIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplatesIncreases oil flow and volume by...

Feuling Parts #7097ST - Race Series® Oil System Kit - Oil Cooled - M8

Block-off plate PART #0932-0036 required when using gear drive cams.Use with short-travel pushrods PART #0928-0114 on stock base circle camshafts with Feuling short-travel lifters (includes Feuling grinds 405, 465, 472, 508, 521 and 592).FeaturesIncludes...

Feuling Parts #7098 - Oil System - HP+® - Water Cooled - M8

30% more pressure gear volume over stock and 53% more scavenge gear volume over stock.FeaturesIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplatesIncreases oil...