Bottom End

Andrews #269450 - Performance Cam

Performance CamFeatures450 cam has great pulling power throughout the rpm range420 bolt-in street cam with more torque and HP for all around riding with stock CR (1800-5200 rpm range)Made in the U.S.ASpecsProduct NameCamRiding StyleStreetUnitsEach

Andrews #288015 - Cam Chain Drive Sprocket

Cam Chain Drive SprocketFeaturesManufactured from 4340 steelCam drive sprockets replace the stock 34-tooth cam drive sprocket and include shimsCrankshaft cam drive is a 17-tooth sprocket that can be used with OEM cam drive sprocketMade in the U.S.A...

Andrews #288020 - Crank Shaft Cam Drive Sprocket

Crank Shaft Cam Drive SprocketFeaturesCan be used with OEM cam drive sprocketMade in the U.S.A.SpecsMaterialSteelTypeCrankshaftUnitsEachRiding StyleStreetProduct NameSprocket

Andrews #288121 - Cam Set - TW21 - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700 - 5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well...

Andrews #288121G - Cam Set - 21G - Gear Drive - Twin Cam

Bolt-in cams.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cams.Cam works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06...

Andrews #288126 - Cam Set - TW26A - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured with the...

Andrews #288126G - Cam Set - TW26 - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Not for '06 dyna.FeaturesManufactured with the help of a computer with...

Andrews #288131 - Cam Set - TW31S - Chain Drive - Twin Cam

Great cam for motors with 95"+ and 10.0:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000 - 5800 rpm power range).Can be used with stock springs and tappets.Includes front cam support plate bearing...

Andrews #288131G - Cam Set - 31G - Gear Drive - Twin Cam

Cam for motors with 95+ inches and 10:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000-5800 RPM power range).Can be used with stock springs and tappets.Not for '06 Dyna.FeaturesManufactured with the...

Andrews #288137 - Cam Set - TW37B - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured...

Andrews #288137G - Cam Set - 37G - Gear Drive - Twin Cam

Bolt-in cam.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06 Dyna.FeaturesManufactured with the help of a...

Andrews #288148 - Cam Set - TW48 - Chain Drive - Twin Cam

'99 Twin Cam requires a splined cam drive sprocket.FeaturesBroad tip cams for baggers with stock motors; max torque at low and mid rpm rangesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and...

Andrews #288150 - Cam Set - TW50 - Chain Drive - Twin Cam

Designed for 95"+ motors with 9.25:1 compression ratio to 9.50:1 compression ratio and stock heads.For lighter bikes.Cams work best at higher rpm of 2500-6000.Can be used with stock valve springs and tappets.Includes front cam support plate bearing...

Andrews #288154 - Cam Set - TW54 - Chain Drive - Twin Cam

Designed for 96" and 103" motors that go up to 10.0:1 compression ratio with 2200-5600 rpm range.Includes front cam support plate bearing.'99 Twin Cams require a splined cam drive sprocket.FeaturesManufactured with the help of a computer with...

Andrews #288154G - Cam Set - 54G - Gear Drive - Twin Cam

Designed for 96" and 103" motors with up to 10.0:1 compression ratio.Cams work best at 2200-5600 rpm range.Not for '06 Dyna.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and...

Andrews #288155G - Cam Set - 55G - Gear Drive - Twin Cam

Cams for maximum torque and horsepower at 2600-6000+ rpm.Designed for 88'-95" engines with 9.5:1 compression ratio or higher.Coil bind must be checked, but stock tappets can be used.Not for '06 Dyna.FeaturesManufactured with the help of a computer...

Andrews #288157 - TW57 Grind Cam - Twin Cam

TW57 Grind Cam - Twin CamFeaturesBolt-in broad tip cams; 96" , 103" Limited and 110" CVO enginesCams work best at rpm range of 2200-5600SpecsApplicationIntakeExhaust Lift at TDC0.153"Intake Lift0.560"Exhaust Lift0...

Andrews #288160 - Cam Set - TW60 - Chain Drive - Twin Cam

Designed for 95"+ motors with major head work.Maximum torque and horsepower at middle and upper ranges from 2700 to 6500+ rpm.Coil bind and valve-to-valve and valve-to-piston clearance must be checked.Includes front cam support plate bearing.'99...

Andrews #288901 - Cam Gear Install Kit

Cam Gear Install KitFeaturesIncludes all gaskets, bearings and hardware necessary to install gear-driven camsMade in the U.S.A.SpecsProduct NameInstall KitRiding StyleStreetUnitsKitTypeCam

Andrews #291113 - Camshaft - EV13 - Evolution Big Twin

Camshaft - EV13 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatBolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV camsUses stock springs; works with carbs or fuel...

Andrews #291117 - Camshaft - EV31 - Evolution Big twin

Camshaft - EV31 - Evolution Big twinFeaturesCapable of 6000+ rpm with stock springs and no valve floatTiming set for superchargers or big-inch motors with 10.5+ compression ratioSuper power for supercharged enginesMade in the USAMust check coil bind,...

Andrews #291123 - Camshaft - EV23 - Evolution Big Twin

Camshaft - EV23 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatBolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleysUses stock springs; works with carbs or fuel injectionCrisp...

Andrews #291127 - Camshaft - EV27 - Evolution Big Twin

Camshaft - EV27 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatBolt-in street cam with fast open and close rampsUses stock springs; works with carbs or fuel injectionPulls from 1500 to 6000 rpmSimilar timing to EV3,...

Andrews #291130 - Camshaft - EV3 - Evolution Big Twin

Camshaft - EV3 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatA 6000+ rpm cam for stock heads and springs with hydraulic liftersBolt-in cam for light bikes (FXRS, etc.) adds significant mid-range power without...