Tools & Supplies

Motion PRO #08-0142 - Accessory - Jumbo Chain Tool

Accessory - Jumbo Chain ToolFeaturesThis accessory for the jumbo chain tool will safely and properly peens soft-nose-type master link pin tipRetains that factory quad stake lookSpecifically designed for use with part# 08-0135 jumbo chain tool.Not for use...

Motion PRO #08-0143 - Bleeder - Brake Line - Hydraulic

Bleeder - Brake Line - HydraulicFeaturesUnique check valve lets fluid and air escape while preventing air from re-entering the systemUniversal tool makes bleeding brakes a one-person jobWill not bleed air from a dry systemInstructions and hose...

Motion PRO #08-0144 - Fork Spring Tool - Springer/Front Fork - Harley Davidson

Fork Spring Tool - Springer/Front Fork - Harley DavidsonFeaturesAssists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcyclesMade in the USASpecsRiding StyleStreetTypeSpringerColor/FinishSilverProduct NameFork Spring...

Motion PRO #08-0145 - T-Handle Socket Wrench - Metric - Set 4

T-Handle Socket Wrench - Metric - Set 4FeaturesHex only extends part of the way into the socket to allow the nut to be held flush with the end for easier, hands-free startingDurable nickel-pewter finish T-handle with deep six-point metric socket...

Motion PRO #08-0147 - Wrench - Ratchet Plug

Wrench - Ratchet PlugFeaturesDesigned to fit in limited space on many water-cooled 2-stroke enginesRatchet mechanism works one way; turn over to reverseFits standard 13/16" plugsSpecsRiding StyleStreetUnitsEachFor Engine...

Motion PRO #08-0153 - Side Case Puller - Harley-Davidson/Buell

Side Case Puller - Harley-Davidson/BuellFeaturesIncludes bracket, puller bolt and set screwsUsed to remove the right side-case coverMade in the USADesigned to work with '70 to '99 Big Twin models excluding '99 Twin Cam’s, '95-'02 Buell® models and '90...

Motion PRO #08-0157 - Spoke Wrench - Classic - 6.5/6.8 mm

Spoke Wrench - Classic - 6.5/6.8 mmFeaturesSquare-end openings grip the spoke nipple on all four sidesOffset slotted end make it easy and quick to useSpecsWrench Size6.8 mmRiding StyleOff-RoadTypeClassicMaterialAlloy SteelMeasurement...

Motion PRO #08-0158 - T-Handle - 1/4" Drive

T-Handle - 1/4" DriveFeaturesUse any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivelsSpecsMaterialVanadium SteelRiding StyleUTVStyleT-HandleTypeHex DriveProduct NameDriverColor/FinishNickel...

Motion PRO #08-0159 - T-Handle - 3/8" Drive

T-Handle - 3/8" DriveFeaturesUse any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivelsSpecsColor/FinishNickel PewterDrive Size3/8"TypeCrow's FootRiding StyleWatercraftApplicationMulti...

Motion PRO #08-0161 - Multi-Purpose Tool

Multi-Purpose ToolFeaturesCan be used to remove 8, 10, 12, 14 mm bolts, #2 and #3 Phillips screws, small and medium straight-slot screws and 5 and 6 mm Hex boltsIncludes a 1/4" and 3/8" socket driver, 10 mm, 12 mm 1/4" drive sockets, and a...

Motion PRO #08-0175 - Spark Plug Socket - 18 mm

Spark Plug Socket - 18 mmFeaturesSocket can be driven with various tools including the Motion Pro® spark plug ratchet wrench, 3/8" ratchet, 13/16" wrench, tool kit bar, or a Phillips screwdriver placed through the 8.5 mm hole at the top of the...

Motion PRO #08-0181 - Carb Tool - Adjuster - Keihin FCR

Carb Tool - Adjuster - Keihin FCRFeaturesIncludes 6 mm hex for main jets, long-reach straight slot for pilot jets and a 3 mm hex for removing the float bowlContains longer bits for reaching into recessed cavities to adjust Keihin FCR carburetorsIdeal for...

Motion PRO #08-0182 - Cable Luber

Cable LuberFeaturesClamps over housing and wire allowing an aerosol can to be connectedOnce lube runs out the far end, the cable is lubricatedUsed to inject lubricant into cable housingSpecsRiding StyleStreetColor/FinishBlueApplicationCable...

Motion PRO #08-0183 - Valve Core Tool - For Schrader Valve - Installation/Removal

Valve Core Tool - For Schrader Valve - Installation/RemovalFeaturesAllows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve)Perfect tool pack accessorySpecsRiding StyleSnowTypeInstallationProduct...

Motion PRO #08-0185 - Tools - Hex/Ball-End/Assortment - Set

Tools - Hex/Ball-End/Assortment - SetFeaturesBall ends allow for better access to hex socket bolts (up to 25° working angle)Sizes include: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mmMade from chrome vanadium steelConvenient holder includedMade in the...