Tools & Supplies

Motion PRO #08-0373 - Fork Compression Valve Tool - Removal

Fork Compression Valve Tool - RemovalFeaturesFor removing the compression valve from cartridge19 mm hex drive, 36 mm octagonSpecsRiding StyleAdventure Touring / Dual-SportMaterial6061-T6 AluminumProduct NameFork Compression Valve...

Motion PRO #08-0374 - T-Handle - Ball Point - Hex - 4 mm

T-Handle - Ball Point - Hex - 4 mmFeaturesUse T-handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fastenersBall end allows for better access to hard-to-reach Allen-head bolts (up to 25° working angle)SpecsHex Size4...

Motion PRO #08-0376 - T-Handle - Ball Point - Hex - 6 mm

T-Handle - Ball Point - Hex - 6 mmFeaturesUse T-handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fastenersBall end allows for better access to hard-to-reach Allen-head bolts (up to 25° working angle)SpecsRiding...

Motion PRO #08-0380 - Adapter - Torque Wrench - Adjustable

Adapter - Torque Wrench - AdjustableFeaturesWill work with most 6 mm-19 mm metric and most 1/4"-3/4" fractional SAE combination wrenchesTorque any fastener with a combination wrench or hex wrench3/8" square drive is rated for a maximum...

Motion PRO #08-0382 - Hex Bit Tool - 3 mm x 4 mm

Hex Bit Tool - 3 mm x 4 mmFeaturesFits in Motion Pro® Deep Socket and T-Handle WrenchRubber O-ring will keep bit securely in placeSpecsHex Size4 mmRiding StyleOff-RoadApplicationMotion Pro® Deep SocketColor/FinishNickel PewterStyleDual PurposeProduct...

Motion PRO #08-0383 - T-Handle Tool - Allen - Set - 4-8 mm

T-Handle Tool - Allen - Set - 4-8 mmFeaturesFour piece setUse T-Handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fastenersBall end allows for better access to hard to reach socket head hex bolts (up to 25° working...

Motion PRO #08-0385 - Spanner - Counter Balancer/Clutch Hub/Removal Tool - Honda

Spanner - Counter Balancer/Clutch Hub/Removal Tool - HondaFeaturesHeat treated for strength and durabilityUsed to remove Honda OEM nutDurable hot black oxide finish20 mm inside diameterUse with a 3/8" driver4 pin spannerSpecsProduct...

Motion PRO #08-0386 - Flywheel Puller - Internal Thread - M30 x 1.0

Flywheel Puller - Internal Thread - M30 x 1.0FeaturesLaser etched with Motion Pro logo and part numberUsed for removal of flywheel or rotor if applicableHeat treated for strength and durabilityPremium quality high carbon steelDurable hot black oxide...

Motion PRO #08-0388 - Bead Holder - T-6 Trail Bead Buddy

Bead Holder - T-6 Trail Bead BuddyFeaturesNo more fighting to keep the bead down while installing or repairing off-road tiresHolds the tire bead down in the drop center of the rim during tire changesDelrin securing thumb screw will not damage rim...

Motion PRO #08-0389 - Driver - T-Handle - Mini - Socket - 1/4"

Driver - T-Handle - Mini - Socket - 1/4"FeaturesUse T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fastenersUse with 1/4" drive sockets, allen drive bits, crow's foot, swivels, etc.Compact size for...

Motion PRO #08-0390 - Flywheel Puller - Internal Thread - M33 x 1.5

Flywheel Puller - Internal Thread - M33 x 1.5FeaturesLaser etched with Motion Pro logo and part numberUsed for removal of flywheel or rotor if applicableHeat treated for strength and durabilityPremium quality high carbon steelDurable hot black oxide...

Motion PRO #08-0395 - Fork Seal Cleaner - Sealmate

Fork Seal Cleaner - SealmateFeaturesExtracts dirt and debris trapped between fork seal and tubeEasy way to keep fork seals clean and debris freeWorks on conventional and upside-down forksSpecsUnitsEachMaterialPlasticRiding...

Motion PRO #08-0397 - Axle Tool - Hex - 4-in-1

Axle Tool - Hex - 4-in-1FeaturesUse wrench on external hex of tool for situations exceeding 150 lb/ft3/8" square drive on both ends rated to 150 lb/ftFour metric hex sizes; 17 mm, 19 mm, 22 mm, and 24 mmFits internal hex on many late model sportbike...

Motion PRO #08-0400 - Oil Filter Tool - Puler - KTM

Oil Filter Tool - Puler - KTMFeaturesConical point screw pierces and grabs the sheet metal end cap on filterReduces potential damage to the engine casesFor easy removal of recessed KTM oil filtersContoured handle provides a secure gripNot for use on...

Motion PRO #08-0401 - T-Handle Tool - Mini-Pro - Compact - 6 mm

T-Handle Tool - Mini-Pro - Compact - 6 mmFeaturesCompact size for easy access and easy transportChrome-vanadium tool steel shaftLifetime limited warranty6-3/4" shaft length6 mm driveSpecsRiding...