Tools

Motion PRO #08-0098 - Wrench - T-Handle - 17 mm

Wrench - T-Handle - 17 mmFeaturesHex socket extends only part of the way inside, allowing the nut to be held in the socketSlim outside diameter allows sockets to fit in tight areasGreat for shop and home mechanics alikeSpecsColor/FinishNickel...

Motion PRO #08-0113 - T-Handle Socket Wrench - Metric - Set 7

T-Handle Socket Wrench - Metric - Set 7FeaturesHex only extends part of the way into the socket to allow the nut to be held flush with the end for easier, hands-free startingDurable nickel-pewter finish T-handle with deep six-point metric socket...

Motion PRO #08-0114 - Rack for T-Handle Tools

Rack for T-Handle ToolsFeaturesOne-piece design holds up to eleven T-handle toolsEasily hangs on the side of most tool boxesKeeps T-handles accessible and readyPrecision cut steel constructionMade in the USASpecsRiding...

Motion PRO #08-0115 - Tire Lever - Spoon

Tire Lever - SpoonFeaturesRecommended by top tire changersCurved end fits securely in the handSpoon width is 25 mmWeighs 7.1 ozSpecsRiding StyleStreetColor/FinishPewterLength10"Product NameLeverStyleSpoonTypeTireUnitsEachMaterialSteel

Motion PRO #08-0117 - Fork Tool - Damper Rod - Kayaba/Showa

Fork Tool - Damper Rod - Kayaba/ShowaFeaturesAids in assembly and disassembly of most 41 mm, 43 mm, 46 mm and 47 mm Kayaba and Showa inverted forksMade from hardened steelNot required on the '91-'92 Honda CR models.Is used in applications where the...

Motion PRO #08-0119 - Pilot Screw Adjustment Tool - 17"

Pilot Screw Adjustment Tool - 17"FeaturesDesigned for hard-to-reach air/fuel mixture screws with a straight-slot blade tip that can be rotated by rotating the handle110° angled head extends reach 1"SpecsProduct NameToolColor/FinishRedRiding...

Motion PRO #08-0127 - Hook - Heavy-Duty/Spring

Hook - Heavy-Duty/SpringFeaturesUsed to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other partsSpecsColor/FinishSilverStyleMulti FunctionalRiding StyleUTVTypeSpringProduct NameHookUnitsEach

Motion PRO #08-0131 - T-Handle Tool Set - Mini Pro/Socket

T-Handle Tool Set - Mini Pro/SocketFeaturesSet includes three T-handle wrenches with deep six-point socketsCompact size for easy access and easy transportChrome-vanadium tool steel shaftsDurable hard nickel-pewter...

Motion PRO #08-0133 - Spoke Wrench - Classic - 6/6.3 mm

Spoke Wrench - Classic - 6/6.3 mmFeaturesSquare-end openings grip the spoke nipple on all four sidesOffset slotted end make it easy and quick to useSpecsRiding StyleStreetMeasurement SystemMetricTypeClassicColor/FinishPewterWrench Size6.3 mmMaterialAlloy...

Motion PRO #08-0134 - Adapter - Torque Wrench

Adapter - Torque WrenchFeaturesProperly torque 2-stroke cylinder base nuts and hard-to-reach fastenersExtends the reach of any 3/8" drive torque wrench by 3"Check owner's manual for proper torque specificationsFits 12 mm and 14 mm nuts and...

Motion PRO #08-0135 - Jumbo Chain Tool

Jumbo Chain ToolFeaturesDesigned to break roller chain up to 630 (fits all standard and O-ring chain sizes 520 to 630) and to rivet chain up to 530 (not 630)Master link side plate press kit included to press on side plates on chains up to 530 (not...

Motion PRO #08-0137 - Spring Compressor - Clutch/Removal - XL/Big Twin/Buell

Spring Compressor - Clutch/Removal - XL/Big Twin/BuellFeaturesStrong die cast steel frame with hardened and black oxide coated adapter boltsReplacing the clutch on Harley-Davidson® is a lot easier and fasterDurable low friction brass thrust washerFits...

Motion PRO #08-0142 - Accessory - Jumbo Chain Tool

Accessory - Jumbo Chain ToolFeaturesThis accessory for the jumbo chain tool will safely and properly peens soft-nose-type master link pin tipRetains that factory quad stake lookSpecifically designed for use with part# 08-0135 jumbo chain tool.Not for use...

Motion PRO #08-0143 - Bleeder - Brake Line - Hydraulic

Bleeder - Brake Line - HydraulicFeaturesUnique check valve lets fluid and air escape while preventing air from re-entering the systemUniversal tool makes bleeding brakes a one-person jobWill not bleed air from a dry systemInstructions and hose...

Motion PRO #08-0144 - Fork Spring Tool - Springer/Front Fork - Harley Davidson

Fork Spring Tool - Springer/Front Fork - Harley DavidsonFeaturesAssists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcyclesMade in the USASpecsRiding StyleStreetTypeSpringerColor/FinishSilverProduct NameFork Spring...

Motion PRO #08-0145 - T-Handle Socket Wrench - Metric - Set 4

T-Handle Socket Wrench - Metric - Set 4FeaturesHex only extends part of the way into the socket to allow the nut to be held flush with the end for easier, hands-free startingDurable nickel-pewter finish T-handle with deep six-point metric socket...

Motion PRO #08-0147 - Wrench - Ratchet Plug

Wrench - Ratchet PlugFeaturesDesigned to fit in limited space on many water-cooled 2-stroke enginesRatchet mechanism works one way; turn over to reverseFits standard 13/16" plugsSpecsRiding StyleStreetUnitsEachFor Engine...

Motion PRO #08-0153 - Side Case Puller - Harley-Davidson/Buell

Side Case Puller - Harley-Davidson/BuellFeaturesIncludes bracket, puller bolt and set screwsUsed to remove the right side-case coverMade in the USADesigned to work with '70 to '99 Big Twin models excluding '99 Twin Cam’s, '95-'02 Buell® models and '90...

Motion PRO #08-0157 - Spoke Wrench - Classic - 6.5/6.8 mm

Spoke Wrench - Classic - 6.5/6.8 mmFeaturesSquare-end openings grip the spoke nipple on all four sidesOffset slotted end make it easy and quick to useSpecsWrench Size6.8 mmRiding StyleOff-RoadTypeClassicMaterialAlloy SteelMeasurement...

Motion PRO #08-0158 - T-Handle - 1/4" Drive

T-Handle - 1/4" DriveFeaturesUse any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivelsSpecsMaterialVanadium SteelRiding StyleUTVStyleT-HandleTypeHex DriveProduct NameDriverColor/FinishNickel...

Motion PRO #08-0159 - T-Handle - 3/8" Drive

T-Handle - 3/8" DriveFeaturesUse any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivelsSpecsColor/FinishNickel PewterDrive Size3/8"TypeCrow's FootRiding StyleWatercraftApplicationMulti...

Motion PRO #08-0161 - Multi-Purpose Tool

Multi-Purpose ToolFeaturesCan be used to remove 8, 10, 12, 14 mm bolts, #2 and #3 Phillips screws, small and medium straight-slot screws and 5 and 6 mm Hex boltsIncludes a 1/4" and 3/8" socket driver, 10 mm, 12 mm 1/4" drive sockets, and a...

Motion PRO #08-0175 - Spark Plug Socket - 18 mm

Spark Plug Socket - 18 mmFeaturesSocket can be driven with various tools including the Motion Pro® spark plug ratchet wrench, 3/8" ratchet, 13/16" wrench, tool kit bar, or a Phillips screwdriver placed through the 8.5 mm hole at the top of the...

Motion PRO #08-0181 - Carb Tool - Adjuster - Keihin FCR

Carb Tool - Adjuster - Keihin FCRFeaturesIncludes 6 mm hex for main jets, long-reach straight slot for pilot jets and a 3 mm hex for removing the float bowlContains longer bits for reaching into recessed cavities to adjust Keihin FCR carburetorsIdeal for...