Tools

Motion PRO #08-0182 - Cable Luber

Cable LuberFeaturesClamps over housing and wire allowing an aerosol can to be connectedOnce lube runs out the far end, the cable is lubricatedUsed to inject lubricant into cable housingSpecsRiding StyleStreetColor/FinishBlueApplicationCable...

Motion PRO #08-0183 - Valve Core Tool - For Schrader Valve - Installation/Removal

Valve Core Tool - For Schrader Valve - Installation/RemovalFeaturesAllows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve)Perfect tool pack accessorySpecsRiding StyleSnowTypeInstallationProduct...

Motion PRO #08-0185 - Tools - Hex/Ball-End/Assortment - Set

Tools - Hex/Ball-End/Assortment - SetFeaturesBall ends allow for better access to hex socket bolts (up to 25° working angle)Sizes include: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mmMade from chrome vanadium steelConvenient holder includedMade in the...

Motion PRO #08-0186 - Pliers - Snap Ring

Pliers - Snap RingFeaturesEconomical pliers easily work with both inside and outside opening snap rings or clipsIncludes three extra sets of tips: one additional straight tip and two offset or angle tipsSpecsRiding StyleSnowUnitsEachApplicationSnap...

Motion PRO #08-0213 - Swingarm Bearing Tool

Swingarm Bearing ToolFeaturesKit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mmDesigned for installation of the swingarm bearings on late-model Japanese off-road motorcyclesIncludes three drivers for use...

Motion PRO #08-0220 - Wrench - Rocker Box Cover - 3/16"

Wrench - Rocker Box Cover - 3/16"FeaturesDesigned to reach hard-to-get-at 3/16" hex screw on the rocker boxes of Big Twin, Sportster and Buell modelsVinyl cover offers comfort and minimizes chances of damage to finished surfacesFeatures a...

Motion PRO #08-0227 - Seal/Bearing Retainer Tool - Honda

Seal/Bearing Retainer Tool - HondaFeaturesPrecision design prevents damage to the retainer ring after peened stakes have been removed by drillingTo remove and replace the rear wheel bearing/seal retainer ring, part number 41231-429-000 and...

Motion PRO #08-0228 - Seal/Bearing Retainer Tool - 44 mm - CR

Seal/Bearing Retainer Tool - 44 mm - CRFeaturesPrecision design prevents damage to the retainer ring after peened stakes have been removed by drilling44 mm, to remove and replace the rear wheel bearing/seal retainer ring, part number...

Motion PRO #08-0229 - Carb Tool with Bits - 90°

Carb Tool with Bits - 90°FeaturesIncludes five 1/4" hex drive bits (all 1/2" long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6 mm hex jet bit and 1/4"-hex-to-1/4"-drive bitDetent action in handle with matching...

Motion PRO #08-0230 - Pliers - Masterlink

Pliers - MasterlinkFeaturesOne tip is shorter and notched to be placed on the pin, which allows the longer end to push the clipDesigned to simplify installation and removal of clip-type masterlinksSpecsRiding StyleStreetStyleClipColor/FinishSilverProduct...

Motion PRO #08-0242 - D-Shaped Bit - Replacement

D-Shaped Bit - ReplacementFeaturesReplacement d-shaped bitDurable nickel pewter finishFor use with Motion Pro part# 08-0229.SpecsColor/FinishSilverUnitsEachRiding StyleATVStyleD-ShapedProduct NameBitTypeReplacement

Motion PRO #08-0249 - Adapter Tool Kit

Adapter Tool KitFeaturesAdapter kit does not allow two stroke timing kit to be installed on Yamaha RD two stroke twins when the engine is in the frame but does allow adapter kit with two stroke timing kit to work with engine out of frameAllows...

Motion PRO #08-0250 - Timer - Water Cooled - 2-Stroke

Timer - Water Cooled - 2-StrokeFeaturesKit includes a dial indicator with extensions and a 14 mm spark plug thread adapterDesigned to clear frame tubes on most recent water-cooled modelsAllows inspection and adjustment of ignition timingGauge face size...

Motion PRO #08-0256 - Seal/Bearing Retainer Tool - 47 mm - CR

Seal/Bearing Retainer Tool - 47 mm - CRFeaturesTo remove and replace the rear wheel bearing / seal retainer rings, part numbers 41231-KZ4-J20 and 41231-KS6-700Precision design prevents damage to the retainer ring after peened stakes have been removed by...

Motion PRO #08-0257 - Flywheel Puller - Internal Thread - M24 x 1.5

Flywheel Puller - Internal Thread - M24 x 1.5FeaturesLaser etched with Motion Pro logo and part numberUsed for removal of flywheel or rotor if applicableHeat treated for strength and durabilityPremium quality high carbon steelDurable hot black oxide...

Motion PRO #08-0267 - Bearing Removal Tool - Wheel - 25 mm

Bearing Removal Tool - Wheel - 25 mmFeaturesHeat treated for durability and long service lifeSpecsRiding StyleATVStyleSplit ColletProduct NameBearing Removal ToolMeasurement SystemMetricUnitsEachColor/FinishBlackDrive Size25 mmTypeWheel

Motion PRO #08-0269 - Wheel Bearing Remover - Split Collet - Metric - 10/12/15/17/20/25 mm - Set

Wheel Bearing Remover - Split Collet - Metric - 10/12/15/17/20/25 mm - SetFeaturesEight-piece metric set includes large driver rod, small driver rod, and removers for 10 mm, 12 mm, 15 mm, 17 mm, 20 mm and 25 mm bearingsDependable split collet design to...

Motion PRO #08-0270 - Holder - Rotor/Flywheel/Sprocket

Holder - Rotor/Flywheel/SprocketFeaturesHolds sprockets and rotors with holes center-to-center at a minimum distance of 1/2" (13 mm) and a maximum distance of 9" (230 mm)Keeps flywheels, rotors and sprockets from rotating during removal and...

Motion PRO #08-0273 - Fork Seal Bullet - Protector - Red - 36 mm

Fork Seal Bullet - Protector - Red - 36 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tapeSpecsMaterialPlasticRiding...

Motion PRO #08-0275 - Fork Seal Bullet - Protector - Green - 43 mm

Fork Seal Bullet - Protector - Green - 43 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tapeSpecsRiding...

Motion PRO #08-0277 - Fork Seal Bullet - Protector - Black - 46 mm

Fork Seal Bullet - Protector - Black - 46 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tapeSpecsMaterialPlasticRiding...

Motion PRO #08-0278 - Fork Seal Bullet - Protector - White - 47 mm

Fork Seal Bullet - Protector - White - 47 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tapeSpecsMaterialPlasticRiding...

Motion PRO #08-0279 - Pliers - Master Cylinder/Internal Snap Rings - Hydraulic

Pliers - Master Cylinder/Internal Snap Rings - HydraulicFeaturesCan be used to remove and replace small to medium internal snap rings up to 50 mm deep, including those used for transmission gear locating, bearing retention, and oil seal retentionAllows...

Motion PRO #08-0284 - Tire Lever/Wrench - T6 - Closed End/Contoured - 2-in-1

Tire Lever/Wrench - T6 - Closed End/Contoured - 2-in-1FeaturesUnique no-pinch lip on tire spoon is designed to avoid tube pinch when installing tiresHex end is rated for a maximum torque of 50 ft/lbPerfectly contoured tire spoon on one endLightweight...